(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Universal Joints

Universal joints are fitting components used to transmit shaft rotation at a different angle. Hook joints are the most commonly used type of universal joint. Using a single universal joint at just one shaft end will result in non-uniform speeds, so there must always be a universal joint at each shaft end to make the speed uniform. A single constant-velocity joint can be used to always keep the speed constant even when changing the angle. Products in this category are available in several varieties to match different operating environments. For example, there are covered models that prevent contaminants from entering bearings, products that have been fully hardened to improve fatigue strength, and pre-greased needle bearings designed to withstand high-speed use. Oiling and other maintenance procedures will enable longer operation.

43 items

: 30; 45; 60

Days to Ship	All Same day 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less

Cross Joint Coupling (SCJ Series)

SUNGIL

CAD ：: 2D / 3D

Standard Price:	SGD 39.55-
Days to Ship:	9 Day(s) or more

Wheel attached type spline wheel attached joint strong type B-P type

MIYOSHI KIKAI

[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.

Standard Price:	SGD 167.02-
Days to Ship:	10 Day(s) or more

Standard Miniature Model MM Model

MIYOSHI KIKAI

High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.

Standard Price:	SGD 71.35-
Days to Ship:	17 Day(s) or more

Join Slide SPS Series

MIYOSHI KIKAI

SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.

CAD ：: 2D

Standard Price:	SGD 28.54-
Days to Ship:	7 Day(s) or more

Standard Type, Power Type B Series

MIYOSHI KIKAI

[Features]
· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.

Standard Price:	SGD 36.47-
Days to Ship:	4 Day(s) or more

Flexible Coupling (SFC Series)

SUNGIL

CAD ：: 2D / 3D

Standard Price:	SGD 21.29-
Days to Ship:	4 Day(s) or more

Universal Joints - Set Keyway / Tapped

MISUMI

[Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.

Volume Discount

CAD ：: 2D / 3D

Standard Price:	SGD 6.74-
Days to Ship:	Same day or more

On Sale Till 31/03/2025

Universal Joints - Set Pin

MISUMI

[Features]·This is a coupling that allows the joining angle to be changed freely.

Volume Discount

CAD ：: 2D / 3D

Standard Price:	SGD 6.74-
	Special Price
Days to Ship:	Same day or more

Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model

MIYOSHI KIKAI

[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.

Standard Price:	SGD 208.18-
Days to Ship:	7 Day(s) or more

Standard Type Corrosion Resistant HS Series/BS Series/HSS Series

MIYOSHI KIKAI

[Features]
· Dry lubrication treatment for wear resistance (HS-16 and higher)
· Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not attached.

Standard Price:	SGD 67.23-
Days to Ship:	4 Day(s) or more

Large plastic universal joint MD series

MIGHTY

[Features]
·Zero backlash
·Electrical insulation, non-magnetic
·Oil free
·Resistant to pushing and pulling
·Light weight, low inertia
[Applications]
·Control systems, push-pull transmission mechanisms, audio equipment, audio-visual equipment, textile machinery, instrumentation equipment, environmental equipment, equipment for outdoor use

CAD ：: 2D

Standard Price:	SGD 74.08-
Days to Ship:	8 Day(s) or more

Plastic Universal Joint, MC Series

MIGHTY

[Features]
·Zero backlash
·Angle absorption of 45 degrees for single and 90 degrees for double
·Electrical insulation, non-magnetic
·Lightweight and does not require lubrication
·Excellent durability and chemical resistance
[Applications]
·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
·Information equipment, communication equipment, switching systems
·audio equipment, audiovisual equipment
·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
·Air conditioners, environmental equipment, educational models, leisure models, etc.

CAD ：: 2D

Standard Price:	SGD 16.89-
Days to Ship:	4 Day(s) or more

Universal Joint Coupling -Set Screw Type- [SCJ]

SUNGIL

Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

CAD ：: 2D / 3D

Standard Price:	SGD 36.51-
Days to Ship:	9 Day(s) or more

Standard Type, Precision Type H Series

MIYOSHI KIKAI

[Features]
·The pin is dry lubricated to improve abrasion resistance.
·Please use boots and oil packs to extend the life of the joints.
·For B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, spring pin is not included.

Standard Price:	SGD 62.83-
Days to Ship:	4 Day(s) or more

Standard Type Wear-Resistant HJ Series

MIYOSHI KIKAI

[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· To extend life, boots and oil pack should be used.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.

Standard Price:	SGD 48.18-
Days to Ship:	4 Day(s) or more

Standard Type Wear-Resistant HJD Type

MIYOSHI KIKAI

[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.

Standard Price:	SGD 81.67-
Days to Ship:	7 Day(s) or more

Flexible Shaft Compact Design SF Type (Flexible Shaft)

SHOWA SPRING

Low power / high speed can be changed for transmission freely in the desired direction.

Standard Price:	SGD 27.41-
Days to Ship:	4 Day(s) or more

Standard Type, Strong Type BD Series

MIYOSHI KIKAI

[Features]
· High torque normal use.
· Material: S45C
· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.

Standard Price:	SGD 67.23-
Days to Ship:	7 Day(s) or more

Standard Type, Non Magnetic Corrosion Resistant Type - BR Type

MIYOSHI KIKAI

This product is non-magnetic and has excellent corrosion resistance. [Materials]·Bronze BC6.

Standard Price:	SGD 76.64-
Days to Ship:	17 Day(s) or more

Type with shaft, joint with hexagonal shaft, precision type, H-GX type

MIYOSHI KIKAI

The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.

Standard Price:	SGD 280.38-
Days to Ship:	10 Day(s) or more

Plastic / Universal / Joint MCM Series

MIGHTY

CAD ：: 2D

Standard Price:	SGD 50.12-
Days to Ship:	4 Day(s) or more

Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)

SHOWA SPRING

OILES metal (bushing) is used for the bearing.
Basically for manual rotation (remote control).
[Features]
・ The structure other than the inner shaft is exactly the same as the DS type, so its cost is low and it is durable
・ Allowable transmission torque drops only to 80% even when rotating counterclockwise

Days to Ship: 15 Day(s) or more

Days to Ship:	15 Day(s) or more

Paraflex CPE· CPU Model

MIKI PULLEY

High rigidity with high precision pin and dry metal to minimize backlash.

[Features]
· The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.
· As it is universal type, the shaft reaction force due to installation error is extremely small.
· With damping effect due to sliding friction surface of pin and dry metal.

CAD ：: 2D

Standard Price:	SGD 53.90-
Days to Ship:	4 Day(s) or more

Standard Precision Type D Model

MIYOSHI KIKAI

[Features]
· Spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.

Standard Price:	SGD 150.84-
Days to Ship:	7 Day(s) or more

Joint Slide SPSS Series

MIYOSHI KIKAI

SPSS (spline shaft), SPAS / SPOS (spline sleeve) is made of: S-45C material.

[Features]
· Please note the effective spline size for sleeve and shaft cutting.
· Use on the sliding part during rotation.

CAD ：: 2D

Standard Price:	SGD 81.57-
Days to Ship:	7 Day(s) or more

Shaft attached type Joint with spline shaft Bearing type K-P model

MIYOSHI KIKAI

Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.

Standard Price:	SGD 498.00-
Days to Ship:	10 Day(s) or more

Joint Power Type With Spline Shaft B-PS Series

MIYOSHI KIKAI

[Features]
· P series are short-lead, easy order type.
· Comprising of 2 standard joints (SPS, and join slide SPA).
· In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
· When setting, please ensure symmetry of left / right joint assembly.
· Please note, if set incorrectly, output shaft speed will become uneven.

Standard Price:	SGD 535.12-
Days to Ship:	10 Day(s) or more

Shaft Type, Bearing Type, KL Type, KF Type, KFD Type

MIYOSHI KIKAI

[Features]·Universal joint for light torque and high speed. ·Flange is not included.

CAD ：: 2D

Standard Price:	SGD 228.47-
Days to Ship:	11 Day(s) or more

Universal Joint Coupling - Clamping Long Type -

SUNGIL

Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.

CAD ：: 2D / 3D

Standard Price:	SGD 45.63-
Days to Ship:	4 Day(s) or more

Standard Type Precision S Model

MIYOSHI KIKAI

Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.

Standard Price:	SGD 70.16-
Days to Ship:	4 Day(s) or more

Standard Bearing Model, K Model

MIYOSHI KIKAI

[Features]
·Grease-filled needle bearings are used, making them suitable for high-speed rotation.
·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.
·K-20 and above have a grease nipple.
·When using boots, please use type B or type H.
·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, the spring pins are not included.
[Applications]
·For high speed rotation.

Standard Price:	SGD 148.95-
Days to Ship:	7 Day(s) or more

Standard Bearing Model, KD Model

MIYOSHI KIKAI

[Features]
·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.

Standard Price:	SGD 310.76-
Days to Ship:	7 Day(s) or more

Standard Corrosion Resistant Type HSD/BSD

MIYOSHI KIKAI

[Features]
· Dry lubrication treatment for wear resistance (HSD-16 and higher)
· Holes for the spring pins and taper pins included can be machined in the l/2 position simultaneously with the shaft.
· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.

Standard Price:	SGD 131.69-
Days to Ship:	7 Day(s) or more

Standard Miniature Model, M Model

MIYOSHI KIKAI

High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.

Standard Price:	SGD 49.64-
Days to Ship:	7 Day(s) or more

Join Slide GX Series

MIYOSHI KIKAI

GXS(Hex sanding shaft) is made of S-45C. GXA/GXO (Hex hole sleeve) is made of: STKM-13. Hex shaft / Sleeve can be cut at any position.

[Features]
· The hex shaft and sleeve can be cut at any position.
· Cannot be used in sliding part while rotating.
· When using as a slide unit, the NX slide unit should also be considered.

CAD ：: 2D

Standard Price:	SGD 28.77-
Days to Ship:	7 Day(s) or more

With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model

MIYOSHI KIKAI

[Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.

Standard Price:	SGD 189.44-
Days to Ship:	10 Day(s) or more

Shaft type spline, shaft type joint, stainless type HS-P

MIYOSHI KIKAI

[Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SUS304.

Standard Price:	SGD 425.23-
Days to Ship:	10 Day(s) or more

Precision Shaft Fitting, Correctable, UA-C Series

SAKAI MANUFACTURING

Ideal for high precision and highly responsive control.

[Features]
· With high performance and double bolt clamp specification, suitable for high precision, highly responsive control.

CAD ：: 2D / 3D

Standard Price:	SGD 48.43-
Days to Ship:	4 Day(s) or more

Type with shaft, joint with hexagonal shaft, precision type, S-GX type

MIYOSHI KIKAI

[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.

Standard Price:	SGD 330.79-
Days to Ship:	10 Day(s) or more

Reinforced B-GX Type of Hexagonal Shaft Joint

MIYOSHI KIKAI

[Features]
· Shaft can be freely cut at any point.
· Expansion / contraction range is large for broad range of installations.

Standard Price:	SGD 211.64-
Days to Ship:	10 Day(s) or more

Bearing K-GX Type of Hexagonal Shaft Joint

MIYOSHI KIKAI

[Features]
· Comprises 2 standard joints and joint slide (GXS, GXA).
· Joint and join slide are set with spring pin.
· When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.
· After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)
· When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.
· Please note, if set incorrectly, output wheel speed will become uneven.

Standard Price:	SGD 523.65-
Days to Ship:	10 Day(s) or more

With Shaft Model Joints with Spline Shaft Accurate Model S-P Model

MIYOSHI KIKAI

[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.

Standard Price:	SGD 234.93-
Days to Ship:	10 Day(s) or more

Shaft type spline, shaft joint, precise type H-P

MIYOSHI KIKAI

Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.

Standard Price:	SGD 219.63-
Days to Ship:	10 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Shaft Bore Dia. (machined) D1(Ø)
Allowable Torque Range(N•m)
Shaft Bore Dia. (machined) D2(Ø)
Outer Dia. A(Ø)
Overall Length W(mm)
Features
Application
Type
Max. Rotational Speed Range(r/min)
Body Material
Allowable Torque(N•m)
Max. Rotational Speed(r/min)
Allowable Lateral Misalignment Range(mm)
Allowable Lateral Misalignment(mm)
Allowable Angular Misalignment(deg)

								On Sale Till 31/03/2025
Brand	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SUNGIL	MISUMI	MISUMI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIGHTY	MIGHTY	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SHOWA SPRING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIGHTY	SHOWA SPRING	MIKI PULLEY	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SUNGIL	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	SAKAI MANUFACTURING	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI	MIYOSHI KIKAI
Product Series	Cross Joint Coupling (SCJ Series)	Wheel attached type spline wheel attached joint strong type B-P type	Standard Miniature Model MM Model	Join Slide SPS Series	Standard Type, Power Type B Series	Flexible Coupling (SFC Series)	Universal Joints - Set Keyway / Tapped	Universal Joints - Set Pin	Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model	Standard Type Corrosion Resistant HS Series/BS Series/HSS Series	Large plastic universal joint MD series	Plastic Universal Joint, MC Series	Universal Joint Coupling -Set Screw Type- [SCJ]	Standard Type, Precision Type H Series	Standard Type Wear-Resistant HJ Series	Standard Type Wear-Resistant HJD Type	Flexible Shaft Compact Design SF Type (Flexible Shaft)	Standard Type, Strong Type BD Series	Standard Type, Non Magnetic Corrosion Resistant Type - BR Type	Type with shaft, joint with hexagonal shaft, precision type, H-GX type	Plastic / Universal / Joint MCM Series	Flex Shaft CS Type for Bidirectional Rotation and Remote Control (Slide Bearing)	Paraflex CPE· CPU Model	Standard Precision Type D Model	Joint Slide SPSS Series	Shaft attached type Joint with spline shaft Bearing type K-P model	Joint Power Type With Spline Shaft B-PS Series	Shaft Type, Bearing Type, KL Type, KF Type, KFD Type	Universal Joint Coupling - Clamping Long Type -	Standard Type Precision S Model	Standard Bearing Model, K Model	Standard Bearing Model, KD Model	Standard Corrosion Resistant Type HSD/BSD	Standard Miniature Model, M Model	Join Slide GX Series	With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model	Shaft type spline, shaft type joint, stainless type HS-P	Precision Shaft Fitting, Correctable, UA-C Series	Type with shaft, joint with hexagonal shaft, precision type, S-GX type	Reinforced B-GX Type of Hexagonal Shaft Joint	Bearing K-GX Type of Hexagonal Shaft Joint	With Shaft Model Joints with Spline Shaft Accurate Model S-P Model	Shaft type spline, shaft joint, precise type H-P
CAD	2D / 3D			2D		2D / 3D	2D / 3D	2D / 3D			2D	2D	2D / 3D								2D		2D		2D			2D	2D / 3D						2D			2D / 3D
Days to Ship	9 Day(s) or more	10 Day(s) or more	17 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	Same day or more	7 Day(s) or more	4 Day(s) or more	8 Day(s) or more	4 Day(s) or more	9 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	4 Day(s) or more	7 Day(s) or more	17 Day(s) or more	10 Day(s) or more	4 Day(s) or more	15 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	4 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more
Shaft Bore Dia. (machined) D1(Ø)	3 ～ 15	6 ～ 30	1 ～ 1.5	5 ～ 38	6 ～ 60	4 ～ 16	8 ～ 30	6 ～ 30	6 ～ 30	6 ～ 60	8 ～ 20	3 ～ 10	3 ～ 15	6 ～ 30	6 ～ 30	6 ～ 30	-	6 ～ 60	6 ～ 25	6 ～ 30	2 ～ 10	-	3 ～ 22	6 ～ 60	6 ～ 25	10 ～ 30	20 ～ 60	-	3 ～ 15	6 ～ 60	10 ～ 30	10 ～ 30	6 ～ 30	2 ～ 5.5	6 ～ 30	6 ～ 30	6 ～ 20	3 ～ 20	8 ～ 30	6 ～ 30	10 ～ 30	6 ～ 30	6 ～ 30
Allowable Torque Range(N•m)	0.05~1.00 ～ 3.01~5.00	-	-	-	-	1.01~3.00	20.01~50.00 ～ 50.01~100.00	5.01~10.00 ～ 100 < 500	-	-	1.01~3.00 ～ 10.01~20.00	0.05~1.00 ～ 1.01~3.00	0.05~1.00 ～ 3.01~5.00	-	-	-	0.05~1.00 ～ 1.01~3.00	-	-	-	0.05~1.00 ～ 1.01~3.00	1.01~3.00	0.05~1.00 ～ 20.01~50.00	-	-	-	-	-	0.05~1.00 ～ 3.01~5.00	-	-	-	-	-	-	-	-	0.05~1.00 ～ 10.01~20.00	-	-	-	-	-
Shaft Bore Dia. (machined) D2(Ø)	3 ～ 15	-	-	-	-	4 ～ 16	-	-	-	-	8 ～ 20	3 ～ 10	3 ～ 15	-	-	-	-	-	-	-	2 ～ 10	-	3 ～ 22	-	-	-	-	-	3 ～ 15	-	-	-	-	-	-	-	-	3 ～ 20	-	-	-	-	-
Outer Dia. A(Ø)	15 ～ 40	12 ～ 60	2 ～ 3	5 ～ 35	12 ～ 120	29 ～ 54	19 ～ 36	12 ～ 51	12 ～ 51	12.5 ～ 120	23 ～ 36.5	7.1 ～ 17.5	15 ～ 40	12.5 ～ 57	12 ～ 51	12 ～ 51	-	12 ～ 120	16 ～ 50	12.5 ～ 57	7.1 ～ 17.5	28 ～ 32	19 ～ 46	16 ～ 115	6 ～ 22	20 ～ 60	40 ～ 120	36 ～ 118	15 ～ 40	16 ～ 115	20 ～ 60	20 ～ 60	12.5 ～ 60	6 ～ 10	11 ～ 54	12 ～ 51	12.5 ～ 40	15 ～ 55	18 ～ 58	12 ～ 60	20 ～ 60	16 ～ 58	12.5 ～ 57
Overall Length W(mm)	22.4 ～ 45.6	168.5~266.5 ～ 556~1185	9 ～ 12	-	50 ～ 300	28 ～ 58	42 ～ 139	31 ～ 139	105~232 ～ 399~599	40 ～ 300	62 ～ 86	19.1 ～ 75.5	22.4 ～ 45.6	40 ～ 165	31 ～ 122	49.5 ～ 195	150 ～ 300	75 ～ 485	40 ～ 108	131~250 ～ 517~685	27.2 ～ 89.8	-	19.4 ～ 54	50 ～ 340	-	219~450 ～ 556~1188.5	324~806 ～ 760~1312	72 ～ 326	24.2 ～ 51	34 ～ 220	62 ～ 178	96 ～ 275	65 ～ 275	15 ～ 30	-	130.5~238 ～ 444~1094	148.5~252 ～ 335~842	18 ～ 58	132~245 ～ 397~599	162~270 ～ 553~711	194~309 ～ 546~711	136.5~244 ～ 444~1095	148.5~252 ～ 530~1164
Features	-	High Torque	Small	-	High Torque	-	-	-	-	-	High Accuracy ～ Small	High Accuracy ～ No Backlash	Heat Resistant ～ Small	High Accuracy ～ High Durability	-	-	-	High Torque	-	High Accuracy ～ High Durability	High Accuracy ～ No Backlash	High Accuracy ～ Vibration Insulation	High Accuracy ～ Small	High Accuracy ～ Small	-	-	High Torque	-	Heat Resistant ～ Small	High Accuracy ～ Small	-	-	-	Small	-	-	-	High Torsional Rigidity ～ Low Moment of Inertia	High Accuracy ～ Small	High Torque	-	High Accuracy ～ Small	High Accuracy ～ High Durability
Application	-	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard / Servo Motor / Stepping Motor / Encoder	Servo Motor	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard / Servo Motor / Stepping Motor	Standard	Standard	Standard	Standard	Standard	Servo Motor	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard / Servo Motor / Stepping Motor / Encoder	Standard	Standard	Standard	Standard	Standard
Type	-	Shaft Type	Standard Type	Shaft Type	Standard Type	-	Others / Standard Type	Others / Standard Type	Shaft Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Flexible Type	Standard Type	Standard Type	Shaft Type	Standard Type	Flexible Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Standard Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type	Shaft Type
Max. Rotational Speed Range(r/min)	2001~4000 ～ 4001~10000	-	-	-	100~ 300 ～ 1001~2000	2001~4000	-	-	-	< 100 ～ 301~1000	-	4001~10000	2001~4000 ～ 10001~78000	301~1000 ～ 1001~2000	301~1000 ～ 1001~2000	301~1000 ～ 1001~2000	-	100~ 300 ～ 1001~2000	-	-	4001~10000	< 100	2001~4000 ～ 4001~10000	100~ 300 ～ 1001~2000	-	-	-	-	2001~4000 ～ 10001~78000	100~ 300 ～ 2001~4000	301~1000 ～ 2001~4000	301~1000 ～ 2001~4000	100~ 300 ～ 301~1000	301~1000	-	-	-	4001~10000	-	-	-	-	-
Body Material	Aluminum Alloy	Steel	Stainless Steel ～ Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Plastic	Plastic	Aluminum ～ Aluminum Alloy	Steel	Steel	Steel	Steel	Steel	Alloy	Steel	Plastic	Steel	Aluminum	Steel	Stainless Steel	Steel	Steel	-	Aluminum ～ Aluminum Alloy	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Stainless Steel	Aluminum	Steel	Steel	Steel	Steel	Steel
Allowable Torque(N•m)	0.25 ～ 5	-	-	-	-	0.12 ～ 1.5	20.1 ～ 175	5.3 ～ 495	-	-	2.8 ～ 10.7	0.08 ～ 1.6	0.25 ～ 5	-	-	-	0.392 ～ 1.862	-	-	-	0.08 ～ 1.6	1.666 ～ 2.94	0.4 ～ 25	-	-	-	-	-	0.25 ～ 5	-	-	-	-	-	-	-	-	0.25 ～ 20	-	-	-	-	-
Max. Rotational Speed(r/min)	4000 ～ 6000	-	-	-	220 ～ 1700	3000	-	-	-	90 ～ 800	-	10000	4000 ～ 21000	510 ～ 2000	500 ～ 1800	380 ～ 1400	-	160 ～ 1300	-	-	10000	100	3000 ～ 6000	200 ～ 1500	-	-	-	-	3500 ～ 18000	280 ～ 2100	950 ～ 2500	730 ～ 2200	150 ～ 640	700 ～ 1000	-	-	-	6000	-	-	-	-	-
Allowable Lateral Misalignment Range(mm)	0.21~0.40 ～ 0.41~1.0	-	-	-	-	1.1~3.0	-	-	-	-	-	5.1~100	0.21~0.40 ～ 0.41~1.0	-	-	-	-	-	-	-	5.1~100	-	0.02~0.2 ～ 0.41~1.0	-	-	-	-	-	0.21~0.40	-	-	-	-	-	-	-	-	0.02~0.2	-	-	-	-	-
Allowable Lateral Misalignment(mm)	0.3 ～ 0.5	-	-	-	-	2 ～ 3	-	-	-	-	-	5.6 ～ 15.5	0.3 ～ 0.5	-	-	-	-	-	-	-	5.6 ～ 15.5	4,520 ～ 4,610	0.2 ～ 0.5	-	-	-	-	-	0.3 ～ 0.5	-	-	-	-	-	-	-	-	0.2	-	-	-	-	-
Allowable Angular Misalignment(deg)	3	-	-	-	-	10 ～ 12	-	-	-	-	40	45 ～ 90	3	-	-	-	-	-	-	-	45 ～ 90	180	1 ～ 4	-	-	-	-	-	7	-	-	-	-	-	-	-	-	1	-	-	-	-	-

Configure

Specification/Dimensions

Shaft Bore Dia. (machined) D1(Ø)
1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

5.9

6

6.35

7

8

8.4

9

9.525

9.9

10

11

12

14

15

16

17

18

19

20

22

23

25

27

30

31

35

38

40

45

50

60
Drawing

Clear

Allowable Torque Range(N•m)
0.05~1.00

1.01~3.00

3.01~5.00

5.01~10.00

10.01~20.00

20.01~50.00

50.01~100.00

100 < 500
Clear

Shaft Bore Dia. (machined) D2(Ø)
2

3

4

5

6

6.35

7

8

9

9.525

10

11

12

14

15

16

18

19

20

22
Drawing

Clear

Outer Dia. A(Ø)
2

3

5

6

7.1

8

10

11

11.1

12

12.5

13

14

14.3

15

16

17.5

18

19

20

22

23

24

25

26

28

28.5

29

30

32

33

35

36

36.5

37

38

39

40

42

44

45

46

47

48

50

51

52

54

55

57

58

60

70

78

80

88

90

95

98

100

115

118

120
Drawing

Clear

Overall Length W(mm)
9

12

15

18

19.1

19.4

20

22.4

23.6

24

24.2

26.5

27

27.2

28

28.5

30

30.6

31

33.5

34

35

35.3

35.6

36

37.6

39

40

41.7

42

43

44

45

45.6

46.2

49.5

50

50.8

51

51.4

52

53.3

54

56

58

59

60

62

62.1

65

67.5

67.6

68

70

71

72

73

74

75

75.5

76

80

81

82

83

84

86

87

88

89.8

90

92

94

94.5

95

96

100

102

104

105

105~232

108

112

115

117.5

120

122

122~237

124

125

126

127

129

130

130.5~238

131~250

132~245

134

136~269

136.5~244

139

140

143

144

144~275

145

147.5~402

148.5~252

149

150

153

155.5~409

156

158

160

162~270

163

163~265

164

164~283

165

167

168

168~287

168.5~266.5

175

175.5~423.5

176~297

178

179~418

180

180~277

180.5~423.5

182

185~423

187.5~433

188

190

192

192~360

194~309

195

198~366

200

206

207~440

212

212~321

212~440

219~373

219~450

220

220~547

224~325

224~551

228

231~458

233~331

241~391

242~561

244~404

248

248~567

250

257~575

259~403

262~580

264~351

265~577

268~584.5

269~422

270

270~444

275

283~593

284~454

288~599

290

294~794

295~602

298

299~436

300

305~535

307~533

310

312~808.5

316~480

318~621.5

319~811

324~806

326

329~819

330~451

335~842

340

340~1018

343~638.5

345~575

349~581

350

353~1036

355~842

355~1040

360~1034

380~500

383~528

388~528

390

395~1065

397~599

399~599

399~617

401~1072

403~878

403~880.5

407~605

425~1094

426

434~645

437~1101

441~645

444~1094

444~1095

458~1095

465~1122

465~1125.5

485

517~685

520~1136

530~1164

546~711

553~711

556~1185

556~1188.5

588~1182

650~1223

690~1255

760~1312
Drawing

Clear

Features
Heat Resistant

High Accuracy

High Durability

High Torque

High Torsional Rigidity

Low Moment of Inertia

No Backlash

Small

Vibration Insulation
Clear

Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
Clear

Type
- Others
- Standard Type
- Shaft Type
- Flexible Type
Images

Clear

Max. Rotational Speed Range(r/min)
< 100

100~ 300

301~1000

1001~2000

2001~4000

4001~10000

10001~78000
Clear

Body Material
Alloy

Aluminum

Aluminum Alloy

Plastic

Stainless Steel

Steel
Clear

Allowable Torque(N•m)
0.08

0.11

0.12

0.16

0.25

0.36

0.392

0.4

0.45

0.5

0.59

0.6

0.7

0.85

1

1.078

1.30

1.5

1.60

1.666

1.862

2

2.2

2.8

2.94

3.5

5

5.3

5.6

10

10.7

11.6

20

20.1

25

27.4

33

46

66

76

102

129

132

175

330

495
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
Clear

Max. Rotational Speed(r/min)
90

100

110

140

150

160

180

190

200

210

220

230

240

260

270

280

290

300

310

330

340

360

370

380

390

410

430

440

450

460

470

480

500

510

530

560

570

580

600

630

640

650

670

680

690

700

720

730

740

750

770

780

800

810

830

850

880

900

950

1000

1100

1150

1200

1250

1300

1400

1450

1500

1700

1800

1900

2000

2100

2200

2500

3000

3500

4000

4500

5000

6000

7000

9000

10000

12000

16000

18000

21000
Clear

Allowable Lateral Misalignment Range(mm)
0.02~0.2

0.21~0.40

0.41~1.0

1.1~3.0

5.1~100
Clear

Allowable Lateral Misalignment(mm)
0.2

0.3

0.4

0.5

2

2.5

3

4,520

4,610

5.6

9.1

10.9

15.5
Clear

Allowable Angular Misalignment(deg)
1

3

4

7

10

12

40

45

90

180
Clear

Narrow search by specifying Manufacturer

- MISUMI (2)
- Economy series (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Universal Joints

Top of the page

Payment Method more

Credit Card
PayPal
Bank Transfer

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)

Tel: (65) 6733 7211
Fax: (65) 6733 0211

Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Universal Joints

Configure

Specification/Dimensions

Shaft Bore Dia. (machined) D1(Ø)

Allowable Torque Range(N•m)

Shaft Bore Dia. (machined) D2(Ø)

Outer Dia. A(Ø)

Overall Length W(mm)

Features

Application

Type

Max. Rotational Speed Range(r/min)

Body Material

Allowable Torque(N•m)

Max. Rotational Speed(r/min)

Allowable Lateral Misalignment Range(mm)

Allowable Lateral Misalignment(mm)

Allowable Angular Misalignment(deg)

Narrow search by specifying Manufacturer

CAD

Related Categories to Universal Joints

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)