Installation Parts

• 

  Eye Bolt【4 Pieces Per Package】

  NITTO KOGYO

  Optimal eye bolt for movement and installation
  [Features]
  ・ Material: Steel
  ・ Surface treatment: chromate plating

  CAD ：

  2D

  Standard Price:	SGD 59.10
  Days to Ship:	4 Day(s) or more

• 

  EIA Rack Sliding Table, NST Series

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Sliding Table (NST Series)
  
  [Features]
  - Reinforcing fixture for secure fixing.
  - Lock fixture to prevent falls when pulling out the table and to prevent table overhang.
  - If the table is turned upside down, it can be used as a drawer.
  - Attach the included protective sponge to the right and left side interiors before use.
  · Rack opening dimensions may differ by manufacturer, so confirm the dimensions before use.

  CAD ：

  2D

  Standard Price:	SGD 198.78-
  Days to Ship:	4 Day(s) or more

• 

  TB / IEC Rail (35 mm width)【10 Pieces Per Package】

  NITTO KOGYO

  Aluminum rails that support and fix terminal blocks and compatible devices
  [Features]
  ・ Rails are common to all capacities
  ・ Please use it together with the M4 holder (PLX-HA) when mounting the IEC rail mounting device to the body.
  [Applications]
  ・ For supporting and fixing various rail type terminal blocks and IEC rail compatible devices

  CAD ：

  2D

  Standard Price:	SGD 109.72
  Days to Ship:	6 Day(s) or more

• 

  Single-Action Spacer

  MIRAI INDUSTRY

  [Features]
  · Used for adjusting height when anchor bolts are too long.
  · Spacers can be used while stacked.

  Standard Price:	SGD 2.44-
  Days to Ship:	7 Day(s) or more

• 

  Supporter (Low Voltage Insulated Supporter to the Conductor)【25-50 Pieces Per Package】

  SHINOHARA ELECTRIC

  [Features]
  · Eliminates the time and labor needed for conventional manual processing of insulators.
  · Parts for installation are available in 2 types: one with nuts on both ends (S/T/D type) and one with nuts and bolts (SB/TB/DB type). Available in a variety of specifications with different heights and diameters for use in different applications.
  · Excellent insulating properties (withstand voltage: 2.5 kV, 1 min.) and lightweight.
  · Compact size will not interfere with adjacent screws, etc.
  · Made of polypropylene. (Black)
  [Applications]
  · Insulating base for mounting equipment such as distribution boards, control panels and rectifier panels.
  · As an insulation support for bus bar and electrical wiring.
  · Can also be used as a base for branching wires by attaching a branching bracket.

  CAD ：

  2D

  Standard Price:	SGD 65.38-
  Days to Ship:	4 Day(s) or more

• 

  BP21/ Circuit Board Rail

  NITTO KOGYO

  Thepanel rails can be mounted by making countersunk holes on the top and underside of the door.
  [Features]
  ・ Material: Hot-dip galvanized steel plate
  ・ Plate thickness: 2.0 mm
  [Applications]
  ・ For B, S, BF, SF cabinet door back side

  CAD ：

  2D

  Standard Price:	SGD 66.83-
  Days to Ship:	6 Day(s) or more

• 

  Superstud (3/8-Inch Stud With Clamp For Rebar)

  MIRAI INDUSTRY

  [Features]
  · Docking of clamps for cylindrical rods and rebars with 3/8-inch stud.
  · Makes it easy to mount steel outlet boxes to walls and slab reinforcements, preventing the boxes from tilting.
  · Use in conjunction with crank bars, deformed rebar and cylindrical rods (sold separately).

  Standard Price:	SGD 2.47-
  Days to Ship:	7 Day(s) or more

• 

  Bolt Clip

  MIRAI INDUSTRY

  [Features]
  · Use to mount fixtures such as boxes, cable hangers (ACH-T) and saddles to hanging bolts.
  · Single-action mounting to hanging bolts. Removal is also easy.

  Standard Price:	SGD 5.00-
  Days to Ship:	7 Day(s) or more

• 

  Ground Rod for Electric Discharge Machining

  SHINOHARA ELECTRIC

  [Features]
  ・ Since the ground wire is built in the plastic pipe, it has excellent insulation and is safe
  ・ The ground wire and clip from the bottom of the pipe are provided with an insulating tube, so you can use it with peace of mind
  ・ Lightweight and easy to operate
  ・ The manufacturer uses a yellow pipe which signs danger
  [Applications]
  ・ Please use it for grounding discharge of electric charge remaining on the switchboard, etc., after the power supply is turned off (For Indoor)

  Standard Price:	SGD 110.89
  Days to Ship:	7 Day(s) or more

• 

  EX-BR / Circuit Board Attachment Rail【2 Pieces Per Package】

  NITTO KOGYO

  EX-BR series can be used for the attachment and detachment of iron sheets.
  
  [Features]
  · Can be used for the attachment and detachment of iron sheets.
  · Useful for saving on labor since the board does not need to be lifted.

  CAD ：

  2D

  Standard Price:	SGD 186.53-
  Days to Ship:	6 Day(s) or more

• 

  BP32 / Breaker Mounting Base / Sliding Type

  NITTO KOGYO

  Sliding-type breaker mounting base
  [Features]
  ・ The height of the breaker mounting base can be adjusted.
  ・ For mounting the breaker, make a mounting hole suitable for the breaker.
  [Applications]
  ・ For installing breakers

  CAD ：

  2D

  Standard Price:	SGD 41.39-
  Days to Ship:	4 Day(s) or more

• 

  Adjustable Fixed Bar for Lightweight Partitions, KGP Series

  MIRAI INDUSTRY

  [Features]
  - Simple installation with single-sided mounting.
  - Use to mount a box to a lightweight partition wall.
  - No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
  - Convenient for locations with narrow stud spacing (can be used even when cut down).
  - Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
  - The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
  - The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
  - The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.

  Standard Price:	SGD 3.76-
  Days to Ship:	4 Day(s) or more

• 

  Free Mounting Plate

  MIRAI INDUSTRY

  [Features]
  · A plastic resin mounting plate with the feel of a wooden board. Equipment such as circuit breakers, switches, energy meter boxes and instrument boxes can be mounted in any position.
  · Band through-holes are provided for securing onto fixtures such as poles using stainless steel bands.

  Standard Price:	SGD 3.12-
  Days to Ship:	7 Day(s) or more

• 

  Energy Meter / Instrument Box Mounting Plate

  MIRAI INDUSTRY

  [Features]
  · Can be mounted to pole bands.
  For the BP-2U model, band through-holes (10‑mm wide) are provided for securing onto fixtures such as poles using stainless steel bands.

  Standard Price:	SGD 13.68-
  Days to Ship:	7 Day(s) or more

• 

  Anchor Bolt

  MIRAI INDUSTRY

  It is used when mounting heavy items such as chandeliers directly from the box.

  Standard Price:	SGD 2.70
  Days to Ship:	7 Day(s) or more

• 

  Piping Fixture for Seam-Type Folded-Plate Roof

  MIRAI INDUSTRY

  [Features]
  ・ It is used when attaching pipe support materials, etc., to a seam type folded-plate roof (round / square seam)
  ・ HY-T2D can attach a Mirac Hanger for multiple piping

  Standard Price:	SGD 4.61-
  Days to Ship:	7 Day(s) or more

• 

  Pole Band (For Stainless Steel Band)

  MIRAI INDUSTRY

  [Features]
  · A pole band for mounting stainless steel bands onto steel pipes or concrete poles.
  · Enables various boxes/equipment to be easily mounted using wood screws.
  · Clamps and stays are not required, nor are drilling holes or welding steel pipes.
  · Can be mounted on a Rakudashi Pole (MRD-63Y) as-is.
  　(Use the box fixture included with Rakudashi Pole. [Excludes POB-F, POB-1F])

  Standard Price:	SGD 3.05-
  Days to Ship:	3 Day(s) or more

• 

  Pole Band Board

  MIRAI INDUSTRY

  [Features]
  · Combines a pole band with a grooved board to facilitate mounting of outlets, breakers, etc., using wood screws.
  · Mounts onto a pole with just one screw.
  · Can also be used to mount boards directly onto walls.
  · With protection caps to prevent injury.

  Standard Price:	SGD 27.68
  Days to Ship:	7 Day(s) or more

• 

  Pole Band Bracket (For Concrete Poles)

  MIRAI INDUSTRY

  [Features]
  Used for mounting wall boxes, Mirakku Hangers, saddles, etc., onto concrete poles using bands.

  Standard Price:	SGD 20.39
  Days to Ship:	7 Day(s) or more

• 

  Structural Steel Bracket For Bolts

  MIRAI INDUSTRY

  [Features]
  · Used for lowering hanging bolts and supporting racks and ducts, etc.
  · Support cables in combination with a cable hanger.
  · Boxes or eye bolts can be mounted.

  Standard Price:	SGD 4.09-
  Days to Ship:	7 Day(s) or more

• 

  Single-Action Bolt Cover

  MIRAI INDUSTRY

  [Features]
  · For preventing injuries caused by the ends of bolts.
  · Mount by simply pressing on in a single-action.
  · Prevents anchor bolts from rusting. (Fully encloses double nuts with a flat washer, preventing direct exposure to rain.)
  · Can accommodate a wide variety of bolt sizes. (M8 to M42, W 3/8 to W 1' 3/8)

  Standard Price:	SGD 5.04-
  Days to Ship:	7 Day(s) or more

• 

  Steel Beam Metal Fittings SGM / SGMK

  MIRAI INDUSTRY

  [Features]
  ·Used when mounting light fixture, conduits, etc., in combination with a Mirac hanger (SGM only)
  ·Lower the hanging bolt to use it to support racks, ducts, etc.

  Standard Price:	SGD 7.48
  Days to Ship:	7 Day(s) or more

• 

  Support Bracket For Structural Steel Bracket (For SGK)

  MIRAI INDUSTRY

  [Features]
  · Reinforcement bracket for preventing Beam Rakkuru mounted to steel materials from becoming detached due to vibration.
  · Can be retrofitted without removing the Beam Rakkuru.

  Standard Price:	SGD 9.01-
  Days to Ship:	7 Day(s) or more

• 

  SS Bushing【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used as an induction bushing for door opening and closing shaft.
  
  [Features]
  - The taper of the bushing smoothly guides the shaft into the locking aperture when locking the door.
  - Protects against noise caused by vibration.
  - Peeling of the coating around the lock aperture caused by opening and closing of the lock shaft is eliminated, preventing rust formation.
  - Mounting of the bushing can be performed in a single operation by simply pushing it in.

  CAD ：

  2D

  Standard Price:	SGD 112.54
  Days to Ship:	9 Day(s) or more

• 

  Switch Crossover Bar【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used for switch crossover wiring
  
  [Features]
  · Streamlining of wiring through use on transition wiring for common lines of switches.
  · The exposed part is insulation coated, and is therefore safe.
  · The insertion conformation is forked (Y-shaped).
  · Installation and removal are easy.
  · Final wiring result is particularly clean for operation panels, etc. with a large number of different switch types.

  CAD ：

  2D

  Standard Price:	SGD 66.43-
  Days to Ship:	4 Day(s) or more

• 

  Eye Bolt, EB-8S to EB-24S【10-200 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the eye bolts for suspending various types of panels.
  
  [Features]
  · The eye bolts have been manufactured based on the JIS-B1168 standard.

  Standard Price:	SGD 839.83-
  Days to Ship:	21 Day(s) or more

• 

  Extensive EIA Rack Stowing Shelf, SRE Series

  TAKACHI ELECTRONICS ENCLOSURE

  Extensive EIA rack storage shelf (SRE)
  
  [Features]
  · Storage shelf for a 19” EIA standard rack.
  · Can also be installed in a 19” cabinet rack.
  · Wide, for effective use of storage surface.
  · Beige and black are available and can be selected in accordance with devices.
  · For SRE44-315/420, the shelf board and side boards are integrated.
  · On rare occasions, rack opening dimensions will differ by manufacturer, so confirm the dimensions before use.

  CAD ：

  2D

  Standard Price:	SGD 55.03-
  Days to Ship:	4 Day(s) or more

• 

  BP34-M / Bar Holder / Integrated【10 Pieces Per Package】

  NITTO KOGYO

  [Features]
  ・ Material: Base: Polyester
  ・ It can be used up to 600 V.
  [Applications]
  ・ For making a step in the height of the bar

  CAD ：

  2D

  Standard Price:	SGD 161.70
  Days to Ship:	4 Day(s) or more

• 

  PTMX-H - Holder - Tie Tape Set

  NITTO KOGYO

  [Features]
  ∙ Support lock, equipment, and back wiring with multiple options.
  ∙ Use while mounting direct equipment on the lattice shape body.

  CAD ：

  2D

  Standard Price:	SGD 18.44
  Days to Ship:	9 Day(s) or more

• 

  BP16-MB Eye Bolt Hole Blind Bolt【4-20 Pieces Per Package】

  NITTO KOGYO

  BP16-MB / Eye bolt hole blind bolt used when the eye bolt is removed
  [Features]
  ・ For free-standing panel cabinet series (E-A).
  ・ Material: Steel
  ・ Surface treatment: Chromate plating

  Standard Price:	SGD 18.01-
  Days to Ship:	9 Day(s) or more

• 

  BP16 / Board Mount Stabilizing Plate

  NITTO KOGYO

  Base stabilizer for free-standing control panel cabinet series
  [Features]
  ・ It is a flat design.
  ・ Please use it to help prevent the cabinet from overturning.
  ・ Powder coating
  ・ Coating color: Light beige paint (5Y7/1)
  ・ Material: Steel
  ・ Plate thickness: 4.5 mm

  CAD ：

  2D

  Standard Price:	SGD 128.62-
  Days to Ship:	6 Day(s) or more

• 

  BP22-M - Meter Panel

  NITTO KOGYO

  Meter panel used for installing various instruments in the cabinet
  [Features]
  ・ Depth can be adjusted in 20 mm pitch by adjusting the bar hinge.
  ・ Material: Steel
  ・ Plate thickness: 1.6 mm (meter panel) / 3.2 mm (Panel stand)
  ・ Coating color: Light beige paint (5Y7/1)

  CAD ：

  2D

  Standard Price:	SGD 114.22-
  Days to Ship:	6 Day(s) or more

• 

  Level Fit Mounting Bracket (For FS)【4 Pieces Per Package】

  NITTO KOGYO

  [Features]
  - Please use when mounting a level fit to the bottom of a main body.

  CAD ：

  2D

  Standard Price:	SGD 44.20
  Days to Ship:	6 Day(s) or more

• 

  Fixing Belt

  NITTO KOGYO

  Rack option (For installation)
  [Features]
  ・ Belt width: 25 mm
  [Applications]
  ・ For fixing communication equipment, etc.

  CAD ：

  2D

  Standard Price:	SGD 41.47-
  Days to Ship:	4 Day(s) or more

• 

  Free Mounting Plate (With Knockouts)

  MIRAI INDUSTRY

  [Features]
  · Two handy knockouts for routing VE tubes are provided on each of the top, bottom, left and right side surfaces respectively. · (VE tube [16] for BF-3622, 4222, and 4922, and VE tube [22] for BF-6530)
  · With conduit knockouts, ideal for mounting instrument boxes.

  Standard Price:	SGD 38.11-
  Days to Ship:	7 Day(s) or more

• 

  Instrument Box Mounting Plate

  MIRAI INDUSTRY

  [Specifications]·Can be mounted to pole bands. ·Compatible instrument box: 3-phase small (M/L)

  Standard Price:	SGD 27.17-
  Days to Ship:	7 Day(s) or more

• 

  Integrated Watt-Hour Meter Mounting Plate

  MIRAI INDUSTRY

  [Features]
  · Can be mounted to pole bands.
  For the B-2U model, band through-holes (10‑mm wide) are provided for securing onto fixtures such as poles using stainless steel bands.
  · The B-2H is a 55‑mm thick type that can hold excess cable and features knockouts for feeding through VE tubes (22/28/36) and molded cable ducts (MD-40/70).

  Standard Price:	SGD 26.64-
  Days to Ship:	7 Day(s) or more

• 

  Instrument Hanging Insert

  MIRAI INDUSTRY

  For attaching heavy items such as chandeliers directly to concrete boxes.

  Standard Price:	SGD 2.68
  Days to Ship:	7 Day(s) or more

• 

  Uniporter U

  MIRAI INDUSTRY

  [Specifications]·Used for mounting and fixing enclosures onto slabs, etc. ·Application: For slabs

  Standard Price:	SGD 9.67
  Days to Ship:	7 Day(s) or more

• 

  Magnet Rocketer

  MIRAI INDUSTRY

  [Features]
  ・ It is used to detect the center position of the box on a double ceiling.
  ・ You can use Mirai Industry-made magnet detector to detect the center of the box, so you can open a hole with the SB hole saw in a single operation.

  Standard Price:	SGD 2.84
  Days to Ship:	7 Day(s) or more

• 

  Rocketer

  MIRAI INDUSTRY

  [Specifications]·For marking the center of the enclosure recessed position in the ceiling material, etc. ·Application: ℓ = 88 mm

  Standard Price:	SGD 3.39
  Days to Ship:	7 Day(s) or more

• 

  Reinforcement Pins

  MIRAI INDUSTRY

  [Features]
  · Use to prevent the deformation of boxes when fixing them by pulling them taut with stud bolts.
  · An economical type that can be used many times over.

  Standard Price:	SGD 1.99
  Days to Ship:	7 Day(s) or more

• 

  Polystat (3/8 Inch Stat) Patch Type

  MIRAI INDUSTRY

  It is a patch type 3/8 Stat, so you can simply attach it from the back of the box.

  Standard Price:	SGD 7.23
  Days to Ship:	7 Day(s) or more

• 

  Stud Bolts

  MIRAI INDUSTRY

  [Features]
  · Used for fixing boxes to formwork by pulling them tight.
  · Models OF-1C/1D/1E/1F do not require a wrench. The plastic grip allows them to be fully tightened by hand.
  · The tip of the OF-1D is slightly tapered to make it easier to screw into the stud hole. Also features a slot which can be used to loosen the bolt using a flathead screwdriver.
  · The OF-1A/1B/1E/1F have a stopper to prevent embedding.
  · The threaded tips of the OF-1F are flattened to allow removal using pliers after the concrete has been poured.

  Standard Price:	SGD 7.23
  Days to Ship:	7 Day(s) or more

• 

  Tsuppari Bolts

  MIRAI INDUSTRY

  [Features]
  · Used for clamping boxes to formwork.
  · Simply mount the formwork to securely fix the box.
  · There's no need to make holes in the formwork as it does not involve pulling via stud bolts.

  Standard Price:	SGD 1.73-
  Days to Ship:	7 Day(s) or more

Loading...