Exterior Parts（Page2）

• 

  Box Door Lock, Door Lock, DL Series

  OHM ELECTRIC

  No need for cumbersome door opening and closing. One-touch lock requires just a push of the door
  
  [Features]
  ・Opening...a coin or straight slot screwdriver is sufficient.
  ・Closing...just push on the door.
  ・No special key is required.
  ・Simple mounting; does not take up space

  CAD ：

  2D

  Standard Price:	SGD 21.42
  Days to Ship:	4 Day(s) or more

• 

  Relay Box, Accessory (conversion adapter)【10 Pieces Per Package】

  OHM ELECTRIC

  For use with a relay box (conversion adapter)

  CAD ：

  2D

  Standard Price:	SGD 26.91-
  Days to Ship:	4 Day(s) or more

• 

  BP11-D Door Unit (with Waterproof and Dust Proof Sealing)

  NITTO KOGYO

  Door unit BP11-D used as a small door for operation of self-supporting board, etc.
  [Features]
  ・ With waterproof/dust-proof seal
  ・ It can be installed simply by drilling holes in the cabinet.
  ・ The right and left sides of the door are rounded.
  ・ A lockable waterproof flat handle with superior functionality and design characteristics is used. (Key No. N200)
  ・ The opening and closing angle is about 103°.
  ・ For indoor/outdoor use
  ・ Powder coating that is environmentally friendly and has excellent rust prevention is used

  CAD ：

  2D

  Standard Price:	SGD 176.28-
  Days to Ship:	4 Day(s) or more

• 

  CSX-R Roof

  NITTO KOGYO

  [Features]
  · Roof is used to prevent damage when installing a control station outdoors or when cutting oils or powders dirty the operating surface.
  · Features superior weatherproofing due to the use of aluminum.

  CAD ：

  2D

  Standard Price:	SGD 44.88-
  Days to Ship:	6 Day(s) or more

• 

  BDS-A / Board Space Duct

  NITTO KOGYO

  Space duct for board with acid resistance / alkaline specifications
  [Features]
  ・ Since there is no rear part of the duct, it can be installed after wiring.
  ・ The front panel can be easily removed for easy wiring work, maintenance and inspection.
  ・ Since there are no protrusions such as screws on the top, bottom, left and right sides, you can use multiple power distribution boards side by side.
  ・ Painting performance: Neutral salt water spray resistance 1,000 h / Heavy salt resistant specification coating performance
  ・ Powder coating
  ・ Material: Steel
  ・ Plate thickness: Body: 1.6 mm / front panel: 1.2 mm

  CAD ：

  2D

  Standard Price:	SGD 174.77-
  Days to Ship:	8 Day(s) or more

• 

  ACX-R・S Roof (For ACN Cast Box)

  NITTO KOGYO

  ACX-R series uses an S roof when the cast box is used outdoors, and installation of a water drainage hole is recommended.

  CAD ：

  2D

  Standard Price:	SGD 25.47-
  Days to Ship:	6 Day(s) or more

• 

  BP11-D Stainless Steel Door Unit (with Waterproof and Dust Proof Sealing)

  NITTO KOGYO

  Indoor/outdoor stainless steel door unit (With dust-proof/waterproof seal)
  [Features]
  ・ Door unit stainless steel type
  ・ Material: Door/frame (Stainless steel)
  ・ Plate thickness: 1.5 mm
  ・ Installation location: For indoor/outdoor use
  ・ Coating color: Light beige paint (5Y7/1)
  ・ Powder coating

  CAD ：

  2D

  Standard Price:	SGD 431.19-
  Days to Ship:	6 Day(s) or more

• 

  BP15 / Single-Action Bush【20-50 Pieces Per Package】

  NITTO KOGYO

  Board exterior board parts
  [Features]
  ・ Please use for cable protection.
  ・ Material: Nylon
  ・ Color: Black

  CAD ：

  2D

  Standard Price:	SGD 16.03-
  Days to Ship:	6 Day(s) or more

• 

  Shade for Control Box

  IDEC

  (Accessory) Shade
  
  [Features]
  - Protects control units from direct sunlight, falling objects, etc.
  - Color: 5Y/1 (semi-glossy).

  Standard Price:	SGD 50.32-
  Days to Ship:	12 Day(s) or more

• 

  Control Box Rubber Bushing

  IDEC

  [Features]A rubber bushing for control boxes. [Application]Can be used for wiring holes, control panels, etc.

  Standard Price:	SGD 5.59
  Days to Ship:	3 Day(s) or more

• 

  RE-N Type Card Guide Rail【20 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A card guide rail.

  CAD ：

  2D

  Standard Price:	SGD 18.25-
  Days to Ship:	4 Day(s) or more

• 

  DFL Type External Mounting Feet

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · DFL type external mounting feet for GA dedicated optional mounting components.

  CAD ：

  2D

  Standard Price:	SGD 11.53
  Days to Ship:	5 Day(s) or more

• 

  Silicon Protector, TWSC Series【1-2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · This is a silicon protector for the TWTWN series.
  · A total of 6 colors are available.
  · For compatible cases, see the model information provided below.
  · Protectors are sold in sets of two.
  · Can be produced using one of 500 color sets specified by the customer.
  · Please provide the (Pantone) color number for colors you want.
  · Also, you can send us a sample of the desired color and we can produce a product having a similar color.
  · Please note that screws may damage the silicon if over-tightened.

  CAD ：

  2D

  Standard Price:	SGD 9.62-
  Days to Ship:	5 Day(s) or more

• • On Sale Till 31/03/2025

  

  VSC Type Vent Filter Patch Type【4-5 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Can protect and against condensation and provides air exchange to deal with pressure changes occurring in the case or box as a result of ambient temperature changes.
  · In addition to water resistance and air permeability characteristics, oil alcohol detergents, etc. are repelled at the filter surface.
  · An adhesive is combined with a donut conformation to make mounting easy.
  · Effective for installation on smooth plastic metallic surfaces for which adhesives are readily effective.

  Standard Price:	SGD 16.05-
  	Special Price
  Days to Ship:	Same day

• 

  Plaster ring (Steel)

  MIRAI INDUSTRY

  [Features]A plaster ring that is painted black by electroplating. [Application]Can be used as a cover for outlet boxes and switch enclosures that are driven into concrete walls, etc.

  Standard Price:	SGD 3.10-
  Days to Ship:	4 Day(s) or more

• 

  Coating Substitute Cover (for octagonal configuration)

  MIRAI INDUSTRY

  [Features]
  · Electrodeposition coating (color: black).

  Standard Price:	SGD 2.74
  Days to Ship:	7 Day(s) or more

• 

  Plaster Ring Cover Joint Frame (Plastic)

  MIRAI INDUSTRY

  [Features]
  · No need to use different joining frames for different thicknesses.
  · This is a good value joining frame which can be cut to the exact thickness required (in 5 mm intervals).
  · Can be cut easily.
  · Can be easily cut with a knife.

  Standard Price:	SGD 14.90-
  Days to Ship:	4 Day(s) or more

• 

  flat coating allowance cover (Steel)

  MIRAI INDUSTRY

  [Features]
  · Electrodeposition coating ( black).

  Standard Price:	SGD 3.10-
  Days to Ship:	4 Day(s) or more

• 

  Check Door

  NITTO KOGYO

  Best check door for rack front door
  [Features]
  ・ Standard: JIS standard
  ・ Material: steel t1.6
  ・ The coating color is light beige

  CAD ：

  2D

  Standard Price:	SGD 218.04
  Days to Ship:	6 Day(s) or more

• 

  Adjustable Pressure Plug, (Optional) Accessory for Relay Box

  OHM ELECTRIC

  Keeps the pressure inside a relay box constant, while keeping the box waterproof and dustproof. Prevents fluctuations in internal pressure due to a faulty packaging seal and keeps the box from being damaged.
  The protective structure grade is IP67, ensuring the box is air-permeable. The interior of the box is both dustproof and waterproof, protecting it from condensation and water infiltration.

  Standard Price:	SGD 20.62
  Days to Ship:	4 Day(s) or more

• 

  Thin jet-proof gallery (salt-resistant specification GTS-20W-ST). Grade IP55 (category 2)

  SHINOHARA ELECTRIC

  Replace the filter from the front. The new 20 type with anti-salt specifications available for our popular thin and jet-proof gallery.
  
  [Use]
  - An air-permeable gallery for cubicles and switchboards
  installed in environments prone to salt damage, such as coastal areas.
  [Features]
  - Greatly reduced depth while maintaining the same protection grade (IP45) as previous versions.
  - The inner part shields the filter surface from exposure to the weather,
  so rainwater will never affect filtration.
  - Filter can be maintained from the front.
  - A 160 mm square fan can be fitted to the rear face of the GTS-20W and GTS-45W. (Use for exhaust purposes.)
  [Material specifications]
  - Outer louver: SUS304, 1.5mm, painted with 5Y7/1 (semi-gloss)
  - Inner louver: Polypropylene
  - Salt filter: Salt filter (trapping efficiency: 90%)
  - Filter case: SUS304, 1.2mm, painted with 5Y7/1
  - Waterproof packing: CR sponge
  - Outer louver mounting screw: SUS cross-recessed pan-head flat washer, nylon captive washer, M5 x 8
  - Conical spring nut: SUS M6 x 8

  CAD ：

  2D

  Standard Price:	SGD 607.74-
  Days to Ship:	7 Day(s) or more

• 

  Aluminum Plate for Engraving【10 Pieces Per Package】

  IMARK

  [Features]
  - Anodized finish for scratch resistance and ease of working.
  [Use]
  - An indoor nameplate for small-scale interiors.

  Standard Price:	SGD 29.32
  Days to Ship:	8 Day(s)

• 

  Blank Cover

  MIRAI INDUSTRY

  [Features]
  · Decorative plate for when using wiremold switch boxes as joint boxes (simply fit in to mount).

  Standard Price:	SGD 2.76-
  Days to Ship:	3 Day(s) or more

• 

  Metal Mounting Fittings (For Energy Meter Mounting Plate)

  MIRAI INDUSTRY

  [Features]
  · Use to keep a gap between the energy meter and the wall surface so as to prevent damage to fixtures such as pipes and struts within pipe-shafts.

  Standard Price:	SGD 26.21-
  Days to Ship:	7 Day(s) or more

• 

  Adjustment Fixing Plate for Right Angle Support

  MIRAI INDUSTRY

  This is a fixing plate that extends to the base position when there is no base at the mounting position of the right angle support.

  Standard Price:	SGD 18.72
  Days to Ship:	7 Day(s) or more

• 

  Right-Angle Support (For Energy Meter Mounting Plate)

  MIRAI INDUSTRY

  [Features]A right-angle support for a wattmeter mounting plate. To be used for mounting energy meters at a right angle to walls, etc. [Application]Can be used when the boundary distance between houses is narrow, etc.

  Standard Price:	SGD 34.73-
  Days to Ship:	7 Day(s) or more

• 

  Energy Meter Mounting Plate (With Right-Angle Support)

  MIRAI INDUSTRY

  [Features]A mounting plate for wattmeter with right angle support. To be used for mounting energy meters at a right angle to walls, etc. [Application]Can be used when the boundary distance between houses is narrow, etc.

  Standard Price:	SGD 52.24-
  Days to Ship:	7 Day(s) or more

• 

  Adjustment Fixing Bar For Lightweight Partitions

  MIRAI INDUSTRY

  [Features]
  · Used for mounting boxes to lightweight partition walls. (Can also be mounted to wooden pillars.)
  · Available for depths of 36 mm and 45 mm.
  · Can be mounted to either the opening side or rear side of the stud.

  Standard Price:	SGD 4.20-
  Days to Ship:	7 Day(s) or more

• 

  Clamping Inspection Hole

  MIRAI INDUSTRY

  [Features]
  · Mount a blank type cosmetic plate and use as a wall inspection hole.
  · The sliding clasps hold it securely in place.

  Standard Price:	SGD 12.47-
  Days to Ship:	7 Day(s) or more

• 

  Plaster Ring (Single-Action Type)

  MIRAI INDUSTRY

  [Features]
  · Single-action installation to Mirai Industry boxes.
  · Allows equipment mounting positions to be adjusted, even after the concrete is poured and even if the box is slightly tilted. (Except for 2-gang models)
  · The groove for removing nails allows for nails to be easily removed, even after the concrete has been poured.

  Standard Price:	SGD 2.53-
  Days to Ship:	7 Day(s) or more

• 

  Cable Feeding Bushing For Cable Protection

  MIRAI INDUSTRY

  [Features]
  · Use to protect cables when feeding them through from boxes, switchboards, etc.
  · The short type has a neat design with no protrusions from the threaded parts when mounting.
  · Models PBZ-32J to 136J can also be mounted on thick boards.

  Standard Price:	SGD 5.31
  Days to Ship:	3 Day(s) or more

• 

  Plaster Ring Extension Collar (Plastic)

  MIRAI INDUSTRY

  Fits plaster rings perfectly. Includes flanges to help prevent displacement. (The extension collar connection will not become displaced either.)

  Standard Price:	SGD 1.99-
  Days to Ship:	7 Day(s) or more

• 

  Condensation-Prevention Type Plastic Plaster Ring (Single-Action Type)

  MIRAI INDUSTRY

  [Features]
  · A special coating has been applied to the inside of the plaster ring.
  · With a seal to prevent the intrusion of unhardened concrete.
  · Allows equipment mounting positions to be adjusted, even after the concrete is poured and even if the box is slightly tilted.
  · The groove for removing nails allows for nails to be easily removed, even after the concrete has been poured.

  Standard Price:	SGD 5.51-
  Days to Ship:	7 Day(s) or more

• 

  Flat Plaster Ring (Steel)

  MIRAI INDUSTRY

  [Features]This product is a steel flat plaster ring that is painted black by electroplating. [Application]Can be used as a cover for outlet boxes and switch enclosures that are driven into concrete walls, etc.

  Standard Price:	SGD 9.98-
  Days to Ship:	7 Day(s) or more

• 

  Free Plaster Ring

  MIRAI INDUSTRY

  [Features]
  · Even if the outlet box moves position due to the pouring of concrete, the switch or outlet position remains easy to correct.
  · Because the position of mounted equipment can be easily corrected, there is no need to cut away at the concrete.
  · Easy to adjust in any direction (up/down; left/right; diagonal); just by fastening with screws.
  · The spread of mortar is excellent.

  Standard Price:	SGD 8.54-
  Days to Ship:	7 Day(s) or more

• 

  Recessed Plaster Ring

  MIRAI INDUSTRY

  As the wired equipment (switch, outlet, etc.) does not protrude out from the wall, it helps prevent damage to the equipment caused by forklifts and the freight.

  Standard Price:	SGD 18.76-
  Days to Ship:	7 Day(s) or more

• 

  Pre-Installing Plastic Mud Ring (for Octagonal Types)

  MIRAI INDUSTRY

  [Features]
  ・ The plaster ring can be fixed first, and then the box can be fixed according to the piping direction. (the direction of the box can be adjusted even after piping. )
  ・ Pre-installing allows accurate positioning (direction) of the mud ring (apparatus).

  Standard Price:	SGD 5.43
  Days to Ship:	7 Day(s) or more

• 

  Offset Plastic Plaster Ring

  MIRAI INDUSTRY

  [Features]
  · Use when the box cannot be aligned with the set switch position, or when the box has shifted position. (Can be used before or after concrete is poured.)

  Standard Price:	SGD 5.49-
  Days to Ship:	7 Day(s) or more

• 

  Heat Resistant Plastic Plaster Ring

  MIRAI INDUSTRY

  [Features]
  · Allows equipment mounting positions to be adjusted, even after the concrete is poured and even if the box is slightly tilted. (Except the OFL-11PYH, for octagonal type)
  · The groove for removing nails allows for nails to be easily removed, even after the concrete has been poured. (Except the OFL-11PYH, for octagonal type)
  · The single-action type is suitable for precast concrete work as it minimizes the entry of unhardened concrete.
  · Single-action types are for exclusive use with resin plastic boxes manufactured by Mirai Industry.

  Standard Price:	SGD 4.74-
  Days to Ship:	7 Day(s) or more

• 

  Support spacer for mud ring

  MIRAI INDUSTRY

  [Features]
  ・ It is used to prevent deformation of the plastic mud ring when placing high-strength concrete, etc. or when the placement depth is deep.
  ・ You can reuse it as many times as you like.

  Standard Price:	SGD 2.19
  Days to Ship:	7 Day(s) or more

• 

  Plastic Plaster Ring (Flat Type)

  MIRAI INDUSTRY

  · Can fit within the box, which means that upon installation, only the depth of the box needs to be accounted for when considering finished dimensions.

  Standard Price:	SGD 2.82-
  Days to Ship:	7 Day(s) or more

• 

  Plastic Plaster Ring (For Poured Concrete)

  MIRAI INDUSTRY

  [Features]
  · A dedicated type for use when working with pouted concrete. Minimizes the amount of unhardened concrete that gets in.
  · The surface of the plaster ring has been given a textured finish to prevent the concrete from peeling off.
  · Can also be installed to plastic resin square concrete boxes manufactured by Mirai Industry.
  · Allows equipment mounting positions to be adjusted, even after the concrete is poured and even if the box is slightly tilted. (Except OF-11PK)

  Standard Price:	SGD 5.67-
  Days to Ship:	8 Day(s) or more

• 

  Plastic Plaster Ring (For Octagonal)

  MIRAI INDUSTRY

  [Features]
  · Shock resistant plastic (HI)
  · With aluminum foil (except blank types)
  Color: gray

  Standard Price:	SGD 3.67-
  Days to Ship:	7 Day(s) or more

• 

  Plastic Plaster Ring (For Large Square)

  MIRAI INDUSTRY

  [Features]
  · For round and oval hole types, equipment mounting positions can be adjusted, even after the concrete is poured and even if the box is slightly tilted.
  *Except for 2-gang, flat type

  Standard Price:	SGD 5.03-
  Days to Ship:	7 Day(s) or more

• 

  Plastic Plaster Ring (For Medium Square Types)

  MIRAI INDUSTRY

  [Features]
  ·For round type, oval type, and equipment, it is possible to correct the equipment mounting position even if the box is slightly tilted after concrete is placed (Excluding flat surface)
  ·For equipment, the front side can be used as a mud ring, and if turned inside out, it can be used as a flat surface

  Standard Price:	SGD 3.46-
  Days to Ship:	7 Day(s) or more

Loading...