Diaphragm Pump, DP-10, NDP-5/15/20/25
Part Number: DP-10BAC-D

A diaphragm type air-driven pump.
[Features]
· The completely self-contained design means there is no need for priming, and it can efficiently pump water that is mixed with air.
· With a maximum discharge pressure of 0.7 MPa, it can be placed in a high position, and can transfer liquid over long distances.
· Discharge pressure is proportional to the supplied air pressure, so can be easily controlled by adjusting the air regulator.
· None of the wetted parts of the pump are moving parts, which makes for excellent slurry-resistant characteristics, and there is no need to worry about leaking from worn seals.
· Driven only by the pressurized air from the air compressor, so no other explosion-proof measures are required.
[Applications]
· For transferring lubricants, fuel oil, etc., in general factories.
· For waste water and oil drainage in factories.

Specifications of DP-10BAC-D

• Product Type

  Self-Priming

• Discharge Quantity(l/min)

  10

• Nominal Diameter

  3/8 (10 mm)

• Noise Level(dB)

  -

• Mass(g)

  -

• Material 1

  Main body: aluminum

• Materials 2

  Diaphragm: CR rubber

• Weight (g)

  4500.0

• Maximum Flow Rate (L/min)

  -

• Noise level (dB)

  -

• Pump single air operating pressure range (MPa)

  -

• Discharge port diameter

  -

• Pump diameter

  -

• Overall width (mm)

  -

• JAN Code

  4945831012821

• Trusco Code

  811-7016

• Features

  -

• Use

  -

• Amount Of Content

  -

Please check the type/dimensions/specifications of the part DP-10BAC-D in the Diaphragm Pump, DP-10, NDP-5/15/20/25 series.