Diaphragm Pump, DP-10, NDP-5/15/20/25
Part Number: DP-10BAN

A diaphragm type air-driven pump.
[Features]
· The completely self-contained design means there is no need for priming, and it can efficiently pump water that is mixed with air.
· With a maximum discharge pressure of 0.7 MPa, it can be placed in a high position, and can transfer liquid over long distances.
· Discharge pressure is proportional to the supplied air pressure, so can be easily controlled by adjusting the air regulator.
· None of the wetted parts of the pump are moving parts, which makes for excellent slurry-resistant characteristics, and there is no need to worry about leaking from worn seals.
· Driven only by the pressurized air from the air compressor, so no other explosion-proof measures are required.
[Applications]
· For transferring lubricants, fuel oil, etc., in general factories.
· For waste water and oil drainage in factories.

Specifications of DP-10BAN

• Product Type

  Motorized

• Discharge Quantity(l/min)

  1.0~10.0

• Nominal Diameter

  3/8"(10mm)

• Noise Level(dB)

  84

• Mass(g)

  3500

• Material 1

  -

• Materials 2

  -

• Weight (g)

  -

• Maximum Flow Rate (L/min)

  -

• Noise level (dB)

  -

• Pump single air operating pressure range (MPa)

  -

• Discharge port diameter

  -

• Pump diameter

  -

• Overall width (mm)

  -

• JAN Code

  -

• Trusco Code

  466-4299

• Features

  Allows for transport of flammable liquid.

• Use

  Transport of liquid materials that include polishing ingredients. Eliminates leaks of liquid materials from pump. Pressure feeding of liquid materials with high pressure. Drawing out liquid from tank using suction. Adjustment of discharge pressure. Adjustment of valve flow rates and end stopping at operating sites. Reduction of maintenance costs. Transfer of liquids without changing properties.

Please check the type/dimensions/specifications of the part DP-10BAN in the Diaphragm Pump, DP-10, NDP-5/15/20/25 series.