(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Flame Retardant (Equivalent To UL-94 Standard V-0) FR Double Layer Polyurethane Tubing TRBU Series (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
Double-layer polyurethane tubing.
[Features]
· Maximum operating pressure 0.8 MPa or less (at 20°C).
· For use in areas where spatter occurs. Flame retardant (equivalent to UL-94 standard V-0).
· Superior resiliency even when compared to nylon tubing.
(i)Caution
- For specifications and details, please refer to the catalog.
- Product pictures are representations.
Specifications of FR Double Layer Polyurethane Tubing TRBU Series
Cross-section of FR Double Layer Tubing
Maximum operating pressure
Series List
| Nominal | TRBU0604 | TRBU0805 | TRBU1065 | TRBU1208 |
|---|---|---|---|---|
| Inner tubing outer diameter mm | 6 | 8 | 10 | 12 |
| Inner tubing inner diameter mm | 4 | 5 | 6.5 | 8 |
| Outer layer thickness mm | 1 | 1 | 1 | 1 |
| Minimum bending radius mm | 15 | 20 | 27 | 35 |
Specifications
| Fluid | Air, water | |
|---|---|---|
| Maximum operating pressure (MPa) | 20°C | 0.8 |
| 40°C | 0.65 | |
| 60°C | 0.5 | |
| Applicable fittings | FR One-touch Fittings KR-W2 Series | |
| Ambient and fluid temperature | -20 to +60℃, Water: 0 to 40°C (No freezing) | |
| Material | Inner tube | Polyurethane |
| Outer layer | Polyolefin resin (equivalent to UL-94 standard V-0) | |
Note: All inner tubes are black in color.
How To Install On One-Touch Fittings
Procedure
The length and pitch for mounting on one-touch fittings are indicated on the outer layer of the TRBU tube. Cut the tube in accordance with the indications (step 1), then peel off only the outer layer (step 2) and mount on the one-touch fitting.
Caution
- 1. Applicable for general industrial water. Please contact SMC if using other kinds of fluid. Also, the surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes.
- 2. Abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
- 3. The value of the minimum bending radius is measured at the temperature of 20°C as shown in the figure below.
Minimum bending radius
Bend the tube into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the tube breaks or is crushed.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Minimum Bending Radius (mm) | Bundle winding length (m) | Reel winding length (m) | Inner Tube O.D. D (mm) | Inner Tube I.D. d (mm) | Outer Layer Color |
|---|---|---|---|---|---|---|---|---|---|---|
SGD 107.45 | 1 Piece(s) | 32 Day(s) | 15 | 20 | - | 6 | 4 | Black | ||
SGD 537.13 | 1 Piece(s) | 32 Day(s) | 15 | - | 100 | 6 | 4 | Black | ||
SGD 107.45 | 1 Piece(s) | 32 Day(s) | 15 | 20 | - | 6 | 4 | Blue | ||
SGD 537.13 | 1 Piece(s) | 32 Day(s) | 15 | - | 100 | 6 | 4 | Blue | ||
SGD 107.45 | 1 Piece(s) | 32 Day(s) | 15 | 20 | - | 6 | 4 | Green | ||
SGD 537.13 | 1 Piece(s) | 32 Day(s) | 15 | - | 100 | 6 | 4 | Green | ||
SGD 107.45 | 1 Piece(s) | 32 Day(s) | 15 | 20 | - | 6 | 4 | Red | ||
SGD 537.13 | 1 Piece(s) | 32 Day(s) | 15 | - | 100 | 6 | 4 | Red | ||
SGD 107.45 | 1 Piece(s) | 32 Day(s) | 15 | 20 | - | 6 | 4 | White | ||
SGD 537.13 | 1 Piece(s) | 32 Day(s) | 15 | - | 100 | 6 | 4 | White | ||
SGD 107.45 | 1 Piece(s) | 32 Day(s) | 15 | 20 | - | 6 | 4 | Yellow | ||
SGD 537.13 | 1 Piece(s) | 32 Day(s) | 15 | - | 100 | 6 | 4 | Yellow | ||
SGD 187.60 | 1 Piece(s) | 32 Day(s) | 20 | 20 | - | 8 | 5 | Black | ||
SGD 938.23 | 1 Piece(s) | 32 Day(s) | 20 | - | 100 | 8 | 5 | Black | ||
SGD 187.60 | 1 Piece(s) | 32 Day(s) | 20 | 20 | - | 8 | 5 | Blue | ||
SGD 938.23 | 1 Piece(s) | 32 Day(s) | 20 | - | 100 | 8 | 5 | Blue | ||
SGD 187.60 | 1 Piece(s) | 32 Day(s) | 20 | 20 | - | 8 | 5 | Green | ||
SGD 938.23 | 1 Piece(s) | 32 Day(s) | 20 | - | 100 | 8 | 5 | Green | ||
SGD 187.60 | 1 Piece(s) | 32 Day(s) | 20 | 20 | - | 8 | 5 | Red | ||
SGD 938.23 | 1 Piece(s) | 32 Day(s) | 20 | - | 100 | 8 | 5 | Red | ||
SGD 187.60 | 1 Piece(s) | 32 Day(s) | 20 | 20 | - | 8 | 5 | White | ||
SGD 938.23 | 1 Piece(s) | 32 Day(s) | 20 | - | 100 | 8 | 5 | White | ||
SGD 187.60 | 1 Piece(s) | 32 Day(s) | 20 | 20 | - | 8 | 5 | Yellow | ||
SGD 938.23 | 1 Piece(s) | 32 Day(s) | 20 | - | 100 | 8 | 5 | Yellow | ||
SGD 250.48 | 1 Piece(s) | 32 Day(s) | 27 | 20 | - | 10 | 6.5 | Black | ||
SGD 1,252.18 | 1 Piece(s) | 32 Day(s) | 27 | - | 100 | 10 | 6.5 | Black | ||
SGD 250.48 | 1 Piece(s) | 32 Day(s) | 27 | 20 | - | 10 | 6.5 | Blue | ||
SGD 1,252.18 | 1 Piece(s) | 32 Day(s) | 27 | - | 100 | 10 | 6.5 | Blue | ||
SGD 250.48 | 1 Piece(s) | 32 Day(s) | 27 | 20 | - | 10 | 6.5 | Green | ||
SGD 1,252.18 | 1 Piece(s) | 32 Day(s) | 27 | - | 100 | 10 | 6.5 | Green | ||
SGD 250.48 | 1 Piece(s) | 32 Day(s) | 27 | 20 | - | 10 | 6.5 | Red | ||
SGD 1,252.18 | 1 Piece(s) | 32 Day(s) | 27 | - | 100 | 10 | 6.5 | Red | ||
SGD 250.48 | 1 Piece(s) | 32 Day(s) | 27 | 20 | - | 10 | 6.5 | White | ||
SGD 1,252.18 | 1 Piece(s) | Quote | 27 | - | 100 | 10 | 6.5 | White | ||
SGD 250.48 | 1 Piece(s) | 32 Day(s) | 27 | 20 | - | 10 | 6.5 | Yellow | ||
SGD 1,252.18 | 1 Piece(s) | 32 Day(s) | 27 | - | 100 | 10 | 6.5 | Yellow | ||
SGD 342.77 | 1 Piece(s) | 32 Day(s) | 35 | 20 | - | 12 | 8 | Black | ||
SGD 1,713.72 | 1 Piece(s) | 32 Day(s) | 35 | - | 100 | 12 | 8 | Black | ||
SGD 342.77 | 1 Piece(s) | 32 Day(s) | 35 | 20 | - | 12 | 8 | Blue | ||
SGD 1,713.72 | 1 Piece(s) | 32 Day(s) | 35 | - | 100 | 12 | 8 | Blue | ||
SGD 342.77 | 1 Piece(s) | 32 Day(s) | 35 | 20 | - | 12 | 8 | Green | ||
SGD 1,713.72 | 1 Piece(s) | 32 Day(s) | 35 | - | 100 | 12 | 8 | Green | ||
SGD 342.77 | 1 Piece(s) | 32 Day(s) | 35 | 20 | - | 12 | 8 | Red | ||
SGD 1,713.72 | 1 Piece(s) | 32 Day(s) | 35 | - | 100 | 12 | 8 | Red | ||
SGD 342.77 | 1 Piece(s) | 32 Day(s) | 35 | 20 | - | 12 | 8 | White | ||
SGD 1,713.72 | 1 Piece(s) | 32 Day(s) | 35 | - | 100 | 12 | 8 | White | ||
SGD 342.77 | 1 Piece(s) | 32 Day(s) | 35 | 20 | - | 12 | 8 | Yellow | ||
SGD 1,713.72 | 1 Piece(s) | 32 Day(s) | 35 | - | 100 | 12 | 8 | Yellow |
Loading...
Basic Information
| Type | Straight | Cutting Service Usage | No | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Operating Environment | Standard | Material | Inner Tube: Polyurethane / Outer Layer: Polyolefin-Type Resin (UL-94 Standard V-0 Equivalent) | Maximum operating pressure(MPa) | 0.8 (at 20°C) |
| Operating temperature(°C) | -20 to +60, With Water: 0 to +40 (Do Not Freeze) |
Specification/Dimensions
-
Bundle winding length(m)
-
Reel winding length(m)
- 100
-
Inner Tube O.D. D(mm)
- 6
- 8
- 10
- 12
-
Inner Tube I.D. d(mm)
- 4
- 5
- 6.5
- 8
-
Outer Layer Color
- Black
- Blue
- Green
- Red
- White
- Yellow
-
type
- TRBU
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?