Fixed Holders, Holder Accessories

• 

  Power meter holder

  SURUGA SEIKI

  [Features]
  · A holder for fixing commercially available power meter sensors.
  · Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.
  · Fixing is done using a method of sandwiching with screws from the top.
  · Sensors that can be fixed are of limited availability.
  · Can be directly mounted onto bases with the rods removed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 160.65
  Days to Ship:	4 Day(s) or more

• 

  Camera holder (F119-2)

  SURUGA SEIKI

  A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 192.62
  Days to Ship:	4 Day(s) or more

• 

  Rod with Plate

  SURUGA SEIKI

  [Features]
  · Can be fitted with 40 mm stages and holders for Opt Stations, etc.
  · Can be arranged as needed and mounted to cross clamps, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 65.21-
  Days to Ship:	8 Day(s) or more

• 

  Adapter Mounting Bracket

  SURUGA SEIKI

  A bracket to which various types of adapter can be mounted. Can be mounted to a tilt stage. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 82.49-
  Days to Ship:	9 Day(s) or more

• 

  Screw Ring

  SURUGA SEIKI

  A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.89-
  Days to Ship:	4 Day(s) or more

• 

  Alignment target

  SURUGA SEIKI

  Can be used for optical system constructions.
  
  [Features]
  · Used for adjusting the optical axis when building an optical system for the Opt Station.
  · Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
  · Return the pin upward to install in any position.
  · The mark on the target is adjusted to a height of 45 mm.
  · Target stickers (black cross on a white base / white cross on a black base) are included.

  CAD ：

  2D / 3D

  Standard Price:	SGD 159.14
  Days to Ship:	9 Day(s) or more

• 

  Ring Wrench (A92)

  SURUGA SEIKI

  A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	SGD 98.39-
  Days to Ship:	9 Day(s) or more

• 

  Half-fixed holder

  SURUGA SEIKI

  [Features]
  · The mounting position of various types of adapter plate can by adjusted in the YZ axes.
  · Since the mounting position is fixed with screws, it will not move after being fixed.
  · Since the adapter plate is mounted using screws in two locations on the bottom side and there is no obstruction on the upper side, it is easy to handle from the top.
  · Use where no changes will be made once adjusted, such as adjusting the optical axis of lenses.

  CAD ：

  2D / 3D

  Standard Price:	SGD 96.26
  Days to Ship:	9 Day(s) or more

• 

  Fixed-type Holder

  SURUGA SEIKI

  Can retain and fix various types of adapter. The optical axis height is standardized at 25 mm from the bottom. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 49.11
  Days to Ship:	4 Day(s) or more

• 

  Resin ring

  SURUGA SEIKI

  [Features]
  · A product for fixing lenses and mirrors to holders by the manufacturer.
  · Note that this product has been designed exclusively for holders from the manufacturer.
  · Note that even when the diameters are the same, the shapes can differ depending on the product.

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.18
  Days to Ship:	4 Day(s) or more

• 

  Camera holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
  · HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).

  CAD ：

  2D

  Standard Price:	SGD 105.50-
  Days to Ship:	4 Day(s) or more

• 

  Press ring set

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Duracon® ring set consisting of a press ring and cushioning material.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  CAD ：

  2D

  Standard Price:	SGD 26.34-
  Days to Ship:	7 Day(s) or more

• 

  Ring Spanner MHZ-1·MHZ-2

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A ring wrench that uses bits.
  · Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
  · The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.

  CAD ：

  2D

  Standard Price:	SGD 48.58-
  Days to Ship:	4 Day(s) or more

• 

  TV adapter with standard interoperability for microscope use

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 560.52
  Days to Ship:	7 Day(s) or more

• 

  TV adapter with cross interoperability for microscope use

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 560.52
  Days to Ship:	7 Day(s) or more

• 

  TV adapter cross micro for microscope

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 560.52
  Days to Ship:	7 Day(s) or more

• 

  TV adapter with 2 x cross micro for microscope use

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 560.52
  Days to Ship:	7 Day(s) or more

• 

  TV adapter with circle interoperability for microscope use

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 560.52
  Days to Ship:	10 Day(s) or more

• 

  C Mount Adapter

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The TS-CMA can project a scale plate by being set between a "Tool Scope" with C mount and TV camera (requires the separately sold TS-TVA).
  · The TS-CMA can be used for observing with an eyepiece by setting it between a "Tool Scope" with C mount and the eyepiece (requires the separately sold OC-10 or OC-20.)
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 126.03
  Days to Ship:	4 Day(s) or more

Loading...