Lamp Fixtures for Inspection（Power Consumption (Range)：8.1~10）

• 

  Direct Ring Light (Direct Light) IDR Series

  IMAC

  This general-purpose ring light supports a diverse range of visual inspections.
  [Features]
  · A high concentration of shell type LEDs is mounted, and light can be effectively focused on the center by the angle of the circuit board.
  · The tilt is ideal for inspecting for scratches, edges, and alignment markings.
  · The lineup contains various sizes, from standard outer diameters of 32 mm / internal diameter 10 mm to external diameter 140 mm/ internal diameter 95 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Optimized for character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,236.82-
  Days to Ship:	18 Day(s) or more

• 

  Bar Lighting (Direct Light / Diffused Light) IDBA Series

  IMAC

  General purpose bar lighting.
  It can be used widely, including oblique irradiation and transmission applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 782.07-
  Days to Ship:	18 Day(s) or more

• 

  Chip LED Surface Illumination (Surface Emitting) IDHM Series

  IMAC

  Surface lighting with densely arranged chip LEDs.
  Backlight illumination achieves vivid silhouette images. Lineup in multiples of □30 mm. Can be selected to fit the image range.

  CAD ：

  2D

  Standard Price:	SGD 634.99
  Days to Ship:	8 Day(s) or more

• 

  Dedicated Light Units For Image Processing [FLV]

  OMRON

  A wide range of lineup consists of light units such as ring light, bar light, spot light, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,277.98-
  Days to Ship:	14 Day(s) or more

• 

  Sensing Bar Lighting OPB-S Series

  OPTEX FA

  Bar lighting is three times brighter than conventional models and is equipped with a sensing function.
  
  [Features]
  · Provides luminance monitoring via the built-in sensor and long term stability via feedback.
  · Equipped with FALUX sensing.
  · The built-in photodiodes sense the luminance of the LED lighting.
  · Accurately measures the emitted luminance not just during continuous lighting conditions, but also under conditions where the light infrequently flashes on and off.
  · Furthermore, as well as the luminance of the emitted light, the internal temperature is also measured in the lighting itself, which can then be monitored on the power supply side.
  · Feedback control based off these monitored values is also possible using the OPPF series controller.
  · The absolute luminance makes adjusting for instrumentation errors for multiple light units easy.
  · The luminance at the time of shipping from the factory and the absolute luminance unique to the model are stored in the internal memory. The values can be referenced from the OPPF series.
  · With this, in addition to being able to monitor any changes in the luminosity values, adjusting for errors in the instrumentation for multiple lighting units is made easier by being able to compare the values with the absolute luminance value.
  · Inherits the performance of the popular OPB series.
  · Only 3.5 mm taller, even with the sensor built-in.
  · Corrections of fluctuations in brightness due to the FALUX and the excellent optical characteristics can be used as is.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,106.72
  Days to Ship:	6 Day(s) or more

• 

  LED Lamps- Lightings / Direct Ring

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 707.54
  Days to Ship:	4 Day(s) or more

• 

  Direct Ring Lighting OPDR Series

  OPTEX FA

  It produces high-luminance levels by condensing light in the central part.
  [Features]
  ・ It achieves high-luminance illuminate by condensing light on a fixed distance to the workpiece
  ・ Uniformity is high because light is condensed from the outer perimeter of the ring
  ・ It is possible to illuminate over a wide range according to the size of the lighting.
  ・ It is effective for capturing by differences in reflectance of workpiece

  CAD ：

  2D

  Standard Price:	SGD 972.55-
  Days to Ship:	20 Day(s) or more

• 

  Flat Direct Ring Lighting OPDR-F Series

  OPTEX FA

  Direct ring lighting capable of illuminating a wide area.

  CAD ：

  2D

  Standard Price:	SGD 1,045.88-
  Days to Ship:	20 Day(s) or more

• 

  Low Angle Direct Ring Lighting OPDR-LA Series

  OPTEX FA

  Low angle ring lighting ideal for edge extraction and scratch inspection on glossy surfaces.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 1,238.76
  Days to Ship:	20 Day(s) or more

• 

  Sensing LED Ring Lighting OPR Series

  OPTEX FA

  To lighting that self-controls brightness.
  [Features]
  ・ [FALUX sensing]Brightness monitoring and feedback control possible by mounting
  ・ By adopting attachment lens, irradiation angle can be switched to 3 modes
  ・ Improves the uniformity of illuminance distribution while increasing the specific light intensity 2 to 3 times

  CAD ：

  2D / 3D

  Standard Price:	SGD 825.72-
  Days to Ship:	7 Day(s) or more

• 

  High Luminance B'C Line Lighting (2 Row Specification, Direct Light, Wide Angle/Narrow Angle) IDBA-LEH2 Series

  IMAC

  Direct-type bar lighting optimal for large workpieces and long distances.
  [Features]
  · 3 to 4 times brighter than IDBA-LE series. Light color can be selected from white / red / blue.
  · Narrow angle lighting type (L) that is optimal for long-distance lighting (WD 200 to 5,000 mm).
  · Wide angle lighting type (S) that is optimal for short-distance lighting (WD 80 to 200 mm).
  · Optimal for environments where lighting cannot be installed nearby and for applications for uniform irradiation within large trays.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,800 mm are supported.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces (cardboard).
  · Convenient for use as an auxiliary light source in inspection equipment for applications that require a high speed shutter, such as transporting workpieces.

  CAD ：

  2D

  Standard Price:	SGD 797.72
  Days to Ship:	18 Day(s) or more

• 

  B'C Linear Light (Direct Light / Wide-Angle / Narrow-Angle) IDBA-LE Series

  IMAC

  Bar lighting optimal for large workpieces and long distances.
  [Features]
  · One-row specification equipped with high-output power LED.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,200 mm are supported.
  · Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces, etc.
  · Ideal as an auxiliary light source for inspection devices, or as a visual inspection light for tabletop use.
  · Convenient for the external inspection of metal plates and acrylics, etc.

  CAD ：

  2D

  Standard Price:	SGD 665.37
  Days to Ship:	8 Day(s) or more

• 

  Highly Uniform Dome Lighting VDSD Series

  SHIMATEC

  Dome lighting with excellent uniformity and brightness.
  [Features]
  · Uniform and very high brightness.
  · In addition to the illumination of the dome, it can irradiate diffused light from the side.
  · More uniform irradiation is possible through a combination of two types of lights.
  · The edge direction and the upward direction can be dimmed and lit independently.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for inspection of uneven products and foreign matter inspections of food packages, containers, etc.

  Standard Price:	SGD 2,607.63-
  Days to Ship:	13 Day(s) or more

• 

  VXHSL Series Coaxial Vertical Lighting

  SHIMATEC

  Small coaxial illumination equipment with excellent uniformity.
  [Features]
  · Light can be reflected off a flat workpiece by irradiation from the same axis as the camera to make the detected object stand out.
  · The lighting itself is compact but features a wide effective irradiation area.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, PCB alignment, glass, metal, and wafer inspections.
  · Optimal for gloss on metals and glass and for mirror-surfaced workpieces.

  Standard Price:	SGD 1,711.00-
  Days to Ship:	13 Day(s) or more

• 

  General Purpose Bar Illumination, VANSF Series

  SHIMATEC

  Universal bar lighting that combines well balanced brightness and uniformity.
  [Features]
  · Uniformity is improved further by mounting an optional diffusion plate.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Useful for all types of image processing, LCD alignment, PCB alignment, and inspections of chip components and electronic components.

  CAD ：

  2D

  Standard Price:	SGD 1,161.44-
  Days to Ship:	13 Day(s) or more

• 

  Direct Ring Lighting FL-DR Series

  OMRON

  One of the highest luminosities in the industry* / Clear images with wide-field lighting.
  
  [Features]
  · Small yet high-luminosity ODR illumination
  · Broad range of workpiece distances supported

  CAD ：

  2D / 3D

  Standard Price:	SGD 960.54-
  Days to Ship:	11 Day(s) or more

• 

  Square Lens Lighting IFHA Series

  IMAC

  Lightweight lens lighting with low profile of 8 mm.
  [Features]
  ・ Since there is no camera window, there is no light leakage and it is possible to evenly illuminate the entire glossy workpiece
  ・ Sharpness is greatly improved by the special optical design. Printed characters such as barcodes can be captured clearly
  ・ It can be installed in a space smaller than the housing size of only 8 mm
  ・ With a rich lineup of light emitting surfaces of 50 × 50 to 200 × 200 mm, the ideal shape can be selected.
  ・ The brightness is 6 times higher than before, so it can be used with high-speed shutters

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,678.44
  Days to Ship:	16 Day(s) or more

Loading...