(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Locating Pins（Insertion Guide Tolerance：0/-0.005）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
IKOU
-
Straight
-
- On Sale Till 31/03/2025
Small Diameter Locating Pin - Straight / Small Head
MISUMI
- Small Diameter Locating Pin - Straight / Small Head from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
- The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
- The outer diameter of the locating pin can be configurable up to 3 mm.
- SUS304 may not be polished.- Volume Discount
Special Price Days to Ship: Same day or more -
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI
- Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.- Volume Discount
Days to Ship: 5 Day(s) or more -
Small Diameter Locating Pin - Shouldered, Threaded
MISUMI
- Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
- The hardness of steel pin is 50～58HRC.
- SUS304 may not be polished.
- When L=0, an undercut will be added at the neck of the thread.
- Shaft diameter can be selected up to 4 mm.Days to Ship: 5 Day(s) or more -
Days to Ship: 5 Day(s) -
Small Diameter Locating Pin - Small Head / Press Fit
MISUMI
- Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
- Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
- Material code SG and DG are applicable to L configurable type of sphere only.
- L selectable type is applicable to spherical tip type only.
- SUS304 may not be polished.
- Chamfering of mounting portion and change of tolerance are available as alterations.
- Shaft diameter can be configured up to 3 mm.Days to Ship: 5 Day(s) or more -
Small Diameter Locating Pin - with Shoulder Seat
MISUMI
- Small Diameter Locating Pin - with Shoulder Seat from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Spherical tip, and Flat tip.
- The outer diameter of the locating pin can be configurable from 1.0 to 3.5 mm.
- The shoulder part is provided to prevent pin extraction.
- The overall length of the product can be configurable from 13.0 mm to 30.0 mm.
- The material of locating pin is made of Stainless Steel SUS304.Days to Ship: 5 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Threaded
MISUMI
Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.
Days to Ship: 5 Day(s) -
![[Clean & Pack] Small Diameter Locating Pin - Straight](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Small Diameter Locating Pin - Straight
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.- Volume Discount
Days to Ship: 8 Day(s) or more -
Height Adjusting Pins - Press Fit
MISUMI
- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.- Volume Discount
Days to Ship: 4 Day(s) or more -
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 5 Day(s) or more -
MISUMI
- Locating Pins - Press Fit from MISUMI.
- Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).Days to Ship: 5 Day(s) or more -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.- Volume Discount
Days to Ship: 5 Day(s) or more -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)
MISUMI
[Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.
Days to Ship: 5 Day(s) -
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit
MISUMI
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.Days to Ship: 5 Day(s) or more -
Locating Pins - Air Vent, Threaded
MISUMI
Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 5 Day(s) -
Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)
MISUMI
- Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
- Shouldered with each dimension configurable.
- Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.Days to Ship: 5 Day(s) or more -
Small Diameter Locating Pin - Shouldered, Press Fit
MISUMI
- Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
- The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
- SUS304 may not be polished.
- The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
- The outer diameter of the locating pin can be selectable up to 4 mm.Days to Ship: 5 Day(s) or more -
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.Days to Ship: 9 Day(s) or more -
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 5 Day(s)
![[Clean & Pack] Small Diameter Locating Pin - Straight](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_b$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Basic Shape |
| Environmentally friendly |
| Characteristics/Applications |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(mm) |
| Mounting Side Tolerance |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit) | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded) | Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit | Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit) | Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit) | |||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | Same day or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) | 5 Day(s) or more | 5 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) |
| Basic Shape | Straight / Air Vent | Large Head | Shouldered | Large Head | Small Head | Small Head | Large Head | Straight | Small Head | Small Head | Large Head | Large Head | Shouldered | Large Head | Large Head | Shouldered | Shouldered | Large Head | Small Head |
| Environmentally friendly | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - |
| Characteristics/Applications | - | - | - | - | - | - | - | Clean Washed | - | - | - | - | - | - | - | - | - | Clean Washed | - |
| Insertion Guide Tip Shape | Round | Round / Diamond | Round | Square Head | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round | Round / Diamond | Round | Round | Round | Round / Diamond | Round |
| Insertion Guide Tip Type | Tapered / Taper R / Spherical / Flat | Tapered | Taper R / Spherical / Flat | Spherical | Tapered / Taper R / Spherical / Flat | Tapered / Spherical / Flat | Tapered | Tapered / Taper R / Spherical / Flat | Tapered | Spherical | Flat | Spherical | Tapered | Spherical | Flat | Tapered | Tapered / Taper R / Spherical / Flat | Tapered | Flat |
| Insertion Guide Specifications | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Mounting Side Shape | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Threaded | Straight (Press-Fit) | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Heat Treatment | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided / Directly Quenching | Not Provided | Not Provided | Not Provided / Directly Quenching |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel |
| Insertion Guide Outer Dia. D1(mm) | 1 ～ 3 | 1 ～ 30 | 1 ～ 7 | 3.5 ～ 30 | 0.5 ～ 2.99 | 1 ～ 3.5 | 3.5 ～ 30 | 1 ～ 3 | 1 ～ 20 | 1 ～ 20 | 1.5 ～ 30 | 3.5 ～ 30 | 2 ～ 20 | 1 ～ 30 | 3.5 ～ 30 | 1 ～ 20 | 1 ～ 7 | 1 ～ 30 | 1.5 ～ 20 |
| Insertion Guide Tolerance | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 | 0/-0.005 |
| Mounting Side Outer Dia. d(mm) | 0.5 ～ 3 | 1 ～ 20 | 2 ～ 4 | 3 ～ 20 | 0.51 ～ 3 | - | 3 ～ 20 | 0.5 ～ 3 | 2 ～ 20 | 2 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 1 ～ 20 | 3 ～ 20 | 2 ～ 20 | 1 ～ 4 | 1 ～ 20 | 2 ～ 20 |
| Mounting Side Tolerance | 0/-0.005 | 0/-0.005 ～ h7 | 0/-0.005 ～ 0.005/0 | - | 0/-0.01 ～ 0.005/0 | - | 0/-0.005 ～ h7 | 0/-0.005 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 | 0/-0.005 ～ 0.005/0 | 0/-0.005 ～ h7 | 0/-0.005 ～ h7 |
| Cleaning Method | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - |
![[Clean & Pack] Small Diameter Locating Pin - Straight](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664829/110310664829_001_20230911105917.jpg?$product_view_c$)
![[Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310664919/110310664919_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Square Head -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Directly Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(mm)
-
Mounting Side Tolerance
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?