(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

OSG Point Taps（Coating Y/N：NA）

12 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less

Pointed Tap Series, General Purpose EX-POT

OSG

For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way

Standard Price:	SGD 12.58-
Days to Ship:	4 Day(s) or more

Pointed Tap for Stainless Steel use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Standard Price:	SGD 14.07-
Days to Ship:	2 Day(s) or more

Pointed Tap for Thin Plate EX-SS-POT

OSG

Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum

Standard Price:	SGD 13.91-
Days to Ship:	4 Day(s) or more

Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

OSG

With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.

Standard Price:	SGD 23.76-
Days to Ship:	4 Day(s) or more

Pointed Tap for Stainless Steel EX-SUS-POT

OSG

With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem. Besides stainless steel, it is also suitable for various heat resistant steels and strong nickel chrome manganese steel.

Standard Price:	SGD 17.62-
Days to Ship:	4 Day(s) or more

LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

Standard Price:	SGD 20.31-
Days to Ship:	4 Day(s) or more

Pointed Tap for General Application (with OX)_EX-H-POT

OSG

For standard point taps, it is used when the protruding length of the screw is insufficient.

Standard Price:	SGD 13.75-
Days to Ship:	4 Day(s) or more

Long Shank・General Application_EX-LT-POT

OSG

For standard point taps, it is used when the protruding length of the screw is insufficient.

Standard Price:	SGD 21.65-
Days to Ship:	4 Day(s) or more

Pointed Tap for Deep Holes EX-DH-POT

OSG

Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.

Standard Price:	SGD 20.15-
Days to Ship:	4 Day(s) or more

Pointed Tap for Difficult-To-Cut Materials CPM-POT

OSG

The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	SGD 16.01-
Days to Ship:	4 Day(s) or more

CPM Pointed Tap with Long Shank_CPM-LT-POT

OSG

The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	SGD 63.98-
Days to Ship:	4 Day(s) or more

General Application(with OX)_EX-LT-H-POT

OSG

[Specifications]
· Shape: Point tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]

Standard Price:	SGD 23.76-
Days to Ship:	4 Day(s) or more


Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)


Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Pointed Tap Series, General Purpose EX-POT	Pointed Tap for Stainless Steel use EX-SUS-POT	Pointed Tap for Thin Plate EX-SS-POT	Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT	Pointed Tap for Stainless Steel EX-SUS-POT	LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT	Pointed Tap for General Application (with OX)_EX-H-POT	Long Shank・General Application_EX-LT-POT	Pointed Tap for Deep Holes EX-DH-POT	Pointed Tap for Difficult-To-Cut Materials CPM-POT	CPM Pointed Tap with Long Shank_CPM-LT-POT	General Application(with OX)_EX-LT-H-POT
Days to Ship	4 Day(s) or more	2 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
Screw size (Nominal)	No.0UN ～ M48	M1.4 ～ M42	M2 ～ M12	M3 ～ M24	No.10UN ～ 7/16UN	M2 ～ M6	M2 ～ M42	M2 ～ M36	M2.5 ～ M10	M1.4 ～ M48	M8 ～ M12	M3 ～ M20
Screw Types	Meter / unified / Whitworth / Sewing Machine	Meter	Meter	Meter	unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Pitch (P), Number of Threading(mm)	0.25 ～ 80	0.3 ～ 4.5	0.4 ～ 1.75	0.5 ～ 3	8 ～ 48	0.4 ～ 1	0.4 ～ 4.5	0.4 ～ 4	0.45 ～ 1.25	0.3 ～ 5	1.25 ～ 1.75	0.5 ～ 2.5
Tool Material Type	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel
Tap Type	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Chamfer threads (Lcf)	5P	4P	5P	4P	4P	6P	5P	5P	4P	5P	5P	5P
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Coating Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Overall Length (L)(mm)	30 ～ 185	34 ～ 175	40 ～ 82	100 ～ 200	44 ～ 125	40 ～ 62	40 ～ 175	80 ～ 300	44 ～ 75	34 ～ 185	150	100 ～ 150

Configure

Specification/Dimensions

Screw size (Nominal)
No.0

No.0UN

No.10

No.1

No.1UN

No.10UN

No.10-32UNF

No.10-24UNC

No.12

No.12UN

No.2

No.2UN

No.3

No.3UN

No.4

No.4UN

No.4-40UNC

No.5

No.5UN

No.5-40UNC

No.6

No.6UN

S0.6

No.6-32UNC

S0.7

No.8

No.8UN

S0.8

No.8-32UNC

S0.9

1

1UN

M1

W1

1 1/2

1"1/2UN

W1"1/2

1 1/4

1"1/4UN

W1"1/4

1 1/8

W1"1/8

1/2

1/2UN

W1/2

1/2-20UNF

1/2-13UNC

1 3/8

1/4

1/4UN

SM1/4

W1/4

1/4-28UNF

1/4-20UNC

1/8

SM1/8

W1/8

M1.1

M1.2

M1.4

M1.6

M1.7

M1.8

2

M2

M2.0

M2.2

M2.3

M2.5

M2.6

M3

M3.0

STI M3

3/4

3/4UN

W3/4

3/4-16UNF

3/4-10UNC

3/8

3/8UN

W3/8

3/8-24UNF

3/8-16UNC

3/16

SM3/16

W3/16

SM3/32

M3.5

4M

M4

M4.0

STI M4

M4.5

5M

M5

STI M5

5/8

5/8UN

W5/8

5/8-18UNF

5/8-11UNC

5/16

5/16UN

W5/16

5/16-24UNF

5/16-18UNC

5/32

M5.5

M6

STI M6

M7

7/8

7/8UN

W7/8

7/8-14UNF

7/8-9UNC

7/16

7/16UN

7/16-20UNF

7/16-14UNC

7/32

M8

STI M8

M9

9/16

9/16UN

9/16-18UNF

9/16-12UNC

SM9/32

9/64

SM9/64

M10

STI M10

M11

11/64

SM11/64

M12

STI M12

M13

M14

M15

15/64

SM15/64

M16

M17

M18

M19

M20

M22

M23

M24

M25

M26

M27

M28

M30

M32

M33

M35

M36

M38

M39

M40

M42

M45

M48
Clear

Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Miniature
Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Pitch (P), Number of Threading(mm)
0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

6

7

8

9

10

11

12

13

14

16

18

20

24

28

32

36

40

44

48

56

64

72

80
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Vanadium High-Speed Steel
Details

Clear

Tap Type
- Point tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Chamfer threads (Lcf)
2.5P

3P

4P

4.5P

5

5P

6P

24P

25P

26P

27P

28P

29P

30P

31P
Drawing

Clear

Coating Type
- TiAlN
- TiCN
- TiN
- Non-Coated
- Other
Details

Clear

Coating Y/N
- Available
- NA
Clear

Overall Length (L)(mm)
30

32

34

36

40

42

44

46

48

52

55

60

61

62

65

70

72

75

80

82

85

88

90

95

100

105

110

115

120

125

130

135

140

145

150

155

160

165

170

175

180

185

190

195

200

220

230

240

250

260

280

300
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (2)
- Economy series (0)
- YAMAWA MFG (15)
- OSG (12)
- ISHIHASHI (1)
- NACHI(FUJIKOSHI) (1)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- GUHRING (0)
Clear

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

OSG Point Taps（Coating Y/N：NA）

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Point Taps

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)