NITTO KOGYO Control Boxes（Installation：Indoor）

• 

  [CH-A] CH Series Box (with Dustproof Sealing)

  NITTO KOGYO

  Pursuing ease of use with improved workability and abundant variations.
  [Features]
  ・ Snap latches with a clean design and good operability are used.
  ・ The back of the cabinet has a large processing space for mounting holes.
  ・ The inner hinge has a neat external appearance.
  ・ The earth terminal is placed on the front side to facilitate ground wiring work.
  ・ Screws with few protrusions are used to fix the panel.
  [Materials]
  ・ Enclosure: Steel, Handle: Snap latch (stainless steel), Board: Steel
  [Specifications]
  ・ Plate thickness: Door: 1.6 mm; body: 1.2 mm
  ・ Door opening/closing method: Single door
  ・ 2-way wiring possible

  CAD ：

  2D

  Standard Price:	SGD 84.55-
  Days to Ship:	Same day or more

• 

  CL・CL Series Box (Waterproof / Dustproof Design)

  NITTO KOGYO

  CL series box is a corner handle design airtight cabinet.
  
  [Features]
  · A corner handle design airtight cabinet. IP65 equivalent airtight performance.
  · The corner handle provides a strong seal with simple open/close operation and locking via a padlock is also supported.
  · By positioning the handle on the corner of the door, the design has been simplified. This allows for greater utilization of the door surface.
  · Use of urethane foam sealing with no joints that does not readily peel provides high airtightness and maintains stability.
  · By masking the sealing, the color of the cabinet can be changed with a baked finish that will not peel off.
  · An environmentally friendly powder coating is utilized for its excellent durability.

  CAD ：

  2D

  Standard Price:	SGD 107.63-
  Days to Ship:	4 Day(s) or more

• 

  STB_STS / Stainless Steel Base Cabinet

  NITTO KOGYO

  Stainless steel panel enclosure with excellent corrosion resistance.
  [Features]
  ・ It is made of stainless steel (SUS304).

  CAD ：

  2D

  Standard Price:	SGD 534.19-
  Days to Ship:	6 Day(s) or more

• 

  CN Box (Dust Proof and Waterproof Design), International Standard Certified

  NITTO KOGYO

  Screw-on model highly sealed cabinet.
  
  [Features]
  · Use of galvanized steel plate boards makes equipotential bonding connection easy because continuity can be ensured through contact with the installed devices.
  · The iron sheet uses a structure that is electrically connected to the body.
  • Not processed for screws on the main body so it has high IP66 sealing performance.
  · With rear mounting holes.
  · The door is fastened by screws on one side and hinged on the other side.
  · The door set screws are arranged in the corners, giving the door a wide range of use.
  · Clean design where screw heads do not protrude from door surface.
  · The door set screws prevent falling.
  · Use of urethane foam sealing with no joints and that does not readily peel provides high airtightness and maintains stability.
  • Masked packing enables repainting without needing to peel off the paint.
  · The paint uses a powder coating with superior durability that is easy on the environment.

  CAD ：

  2D

  Standard Price:	SGD 116.08-
  Days to Ship:	6 Day(s) or more

• 

  CL-U・CL Series Box (Waterproof / Dustproof Design) / International Standard / Certified

  NITTO KOGYO

  CL-U series is a UL/TUV certified corner handle design.
  
  [Features]
  · UL/CE/TUV certified corner handle design.
  · By using galvanized steel plate, contact continuity between mounted equipment and international standard certified model (CL-U) is assured. The equipotential bonding connection is simplified.
  · The iron sheet uses a structure that is electrically connected to the body.
  · Includes rear mounting holes.
  ▪ Airtight performance equivalent to IP65.
  · The corner handle provides a strong seal with simple open/close operation and locking with a padlock is also feasible.
  · By positioning the handle on the corner of the door, the design has been simplified, allowing for greater utilization of the door surface.
  · Use of urethane foam sealing with no joints that does not readily peel provides high airtightness and maintains stability.
  · An environmentally friendly powder coating is utilized for superior durability.

  CAD ：

  2D

  Standard Price:	SGD 125.59-
  Days to Ship:	5 Day(s) or more

• 

  CH-YA・CH Series Box, Horizontally Long (with Dust Proof Sealing)

  NITTO KOGYO

  CH-YA series is a compact cabinet for an open field network.
  
  [Features]
  • The long compact cabinet can effectively use a limited space.
  • Suitable for stowing a remote I/O, terminal block, or other device level equipment.
  • The handle is compact so it can be opened or closed with a screwdriver.
  • The door opens downward, with a stay for supporting the door (excluding CH12-315YA).

  CAD ：

  2D

  Standard Price:	SGD 112.61-
  Days to Ship:	4 Day(s) or more

• 

  D・D Model Desk Cabinet (with Waterproof, Dust Proof Sealing)

  NITTO KOGYO

  D features a simple, functional design.
  
  [Features]
  · A simple, functional design.
  · A locking waterproof flat handle with superior functionality and design characteristics is used.
  · Weld nuts are included on the rear of the door for convenient device installation.
  · The table stay opening and closing angle opens in two stages and can be opened from one side.
  · A catch makes opening and closing the table section easy.

  CAD ：

  2D

  Standard Price:	SGD 1,049.51-
  Days to Ship:	5 Day(s) or more

• 

  L / Light Cabinet

  NITTO KOGYO

  An eco-friendly cabinet that saves resources and installation costs by weight reduction.
  [Features]
  ・ By optimizing the strength and structure, 50% weight reduction has been achieved compared to the conventional model.
  ・ Door can be reversed easily on site.
  ・ The pivot hinges allow the door to be attached and detached with a single action.
  ・ The wide front opening and panel allow you to make effective use of the space in the cabinet.
  ・ This cabinet is manufactured with considerations for the natural environment, such as resource saving, lead-free paint, and the use of low-formaldehyde wooden board.
  ・ Wall mounting holes (ø9) are provided in the four corners on the back side beforehand, so there is no need to machine mounting holes on site.

  CAD ：

  2D

  Standard Price:	SGD 117.81-
  Days to Ship:	4 Day(s) or more

• 

  B_S / Board Cabinet / Exposed, Depth: 250 mm

  NITTO KOGYO

  B_S25 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Standard Price:	SGD 263.91-
  Days to Ship:	5 Day(s) or more

• 

  PTM-NL / Plastic Box for Communication, Standard (Lattice-Shaped Body)

  NITTO KOGYO

  PTM-NL series is a standard using styrene series resin.
  
  [Features]
  • Uses a lattice-shaped body for improved equipment mounting and freedom of back surface wiring.
  · Based on wire connection tape securing method, mounting screws are not required and R shaped devices can be flexibly mounted.
  · Wiring work is simplified by the cover being single action attachable/detachable.
  • Suitable for mounting in narrow spaces.
  • Since all cover surfaces, upper and lower, and left and right, install knock-outs for exposed wiring, input and output wires can be installed from any direction.

  CAD ：

  2D

  Standard Price:	SGD 45.03-
  Days to Ship:	6 Day(s) or more

• 

  SRM-N / SRM Series Stainless Steel Control Panel Cabinet

  NITTO KOGYO

  SRM-N series is a control panel cabinet that is equipped with a stainless steel window (with waterproof/dustproof sealing) and a rain deflector. SRM-N series control panel enables visual monitoring of equipment, meters, and gauges.
  
  [Features]
  · A control panel cabinet with a stainless steel window with waterproof/dustproof sealing and a rain deflector. Enables visual monitoring of equipment, meters, and gauges. Utilizes a lockable, stainless steel, waterproof flat-handle.
  · The meter panel position is changeable (20 mm pitch in the front/rear depth direction). The meter panel is equipped with a handle for convenient opening and closing.
  · The ground terminal conforms to public building construction standard specifications for ground terminals.

  CAD ：

  2D

  Standard Price:	SGD 1,178.38
  Days to Ship:	5 Day(s) or more

• 

  CHB-A・CH Series Box (with Dust Proof Sealing)

  NITTO KOGYO

  CHB-A series has been designed for ease of use, with improved workability and a wide range of variations.

  CAD ：

  2D

  Standard Price:	SGD 83.97-
  Days to Ship:	4 Day(s) or more

• 

  B_S / Board Cabinet / Exposed, Depth: 200 mm

  NITTO KOGYO

  B_S20 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Standard Price:	SGD 224.18-
  Days to Ship:	4 Day(s) or more

• 

  BBF Plastic Box, Standard, For PTM-BBF/FTTH

  NITTO KOGYO

  PTM-BBF series box is a plastic broadband box for compact storage of FTTH communications equipment.
  
  [Features]
  · A semi-buried plastic communication box able to make installation spaces more compact.
  · Compact storage of telecommunication equipment, optical connection boxes, HUBs, distributors, and telephone terminals for collective housing buildings or a single unit home.
  ▪ Enables neat storage of communications equipment and Internet wiring.
  ▪ The structure is even more compact thanks to space saving achieved through the use of a three-unit structure.
  · Semi-embedded for minimal protrusion from wall surfaces.
  · The front/middle units are hinged opening/closing types for easy mounting and maintenance.
  · An environmentally friendly model that utilizes biomass plastic (polylactic acid) and a styrene-based resin model are available.

  CAD ：

  2D

  Standard Price:	SGD 181.50-
  Days to Ship:	6 Day(s) or more

• 

  SW-N / Stainless Steel Window Cabinet (Draining, with Waterproof/Dustproof Sealing)

  NITTO KOGYO

  Large stainless steel window cabinet with drain, waterproof and dust-proof seal.
  [Features]
  ・ With a large window enabling viewing of inside the cabinet.
  ・ There is no protrusion from the door surface, giving it a clean external appearance.
  ・ It can be locked with a padlock.
  ・ A catch clip is used to open and close the door.

  CAD ：

  2D

  Standard Price:	SGD 805.19-
  Days to Ship:	5 Day(s) or more

• 

  TB-M, Tenant Cabinet

  NITTO KOGYO

  Indoor cabinet suitable for storing electricity meters.
  [Features]
  ・ Cabinet for storing electricity meters corresponding to each power division.
  ・ The earth terminal uses the public building construction standard specifications of Japan.
  ・ WHM single (three)-phase 3-wire type 120 A can be stored.
  ・ The reinforced weather-resistant electricity meter can store up to 30 A of single (three)-phase 3-wire type. (However, if the mounting space T is reduced by 100 mm, single (three)-phase 3-wire type 120 A can be stored. )
  ・ The meter window is olive and comes with a name sticker.
  ・ A flat handle (key No. 200) is used.

  CAD ：

  2D

  Standard Price:	SGD 534.56-
  Days to Ship:	5 Day(s) or more

• 

  DCR-A・DCR Series Desk Cabinet (with Dust Proof Sealing)

  NITTO KOGYO

  Desk type cabinet that allows efficient equipment installation.
  [Features]
  ・ The table stay opening and closing angle has 2 stages, and one side operation is possible.
  ・ An efficient cabinet that combines a CD control box and a CR control box.
  ・ Devices can be attached to the table, enclosure, and back of the door.
  ・ The table surface is inclined at 14°, making it easy to operate the switches.

  CAD ：

  2D

  Standard Price:	SGD 1,396.78-
  Days to Ship:	5 Day(s) or more

• 

  PD・PD Series Control Panel Cabinet (with Dustproof Sealing)

  NITTO KOGYO

  A cabinet with sloped top where the upper part is easy to operate.
  [Features]
  ・ There is an operation panel on the upper slope.
  ・ A lockable waterproof flat handle with superior functionality and design characteristics is used. (Key No. N200)
  ・ The earth terminal uses the public building construction standard specifications.

  CAD ：

  2D

  Standard Price:	SGD 358.84-
  Days to Ship:	5 Day(s) or more

• 

  PTM-BL Model Communication Plastic Box / Standard (with Wooden Board)

  NITTO KOGYO

  PTM-BL series box is made from a flame-retardant, styrene-based resin with a wooden board for conventional mounting.
  
  [Features]
  · Made from styrene-based resin with a wooden board for conventional mounting.
  · A styrene-based resin product with a wooden board.
  · Suitable for securely mounting equipment such as fiber optic junction boxes, etc.
  · Wiring is simplified thanks to a single-action attachable/detachable cover.
  · Protruding wire knockouts are installed in the top/bottom/left/right surfaces of the cover. Wires can be fed in or out of each side.

  CAD ：

  2D

  Standard Price:	SGD 46.76-
  Days to Ship:	4 Day(s) or more

• 

  PTM_PTME / Communications Plastic Box (Cabinet for Stowing Telephone Terminals)

  NITTO KOGYO

  For storing telephone terminals, communication-related equipment, etc.
  [Features]
  ・ 2 types are available: an eco-type that uses eco-friendly biomass plastic and a standard type that uses styrene resin.
  ・ Since the cover can be attached and removed with single-action, wiring work is easy and it is suitable for mounting in a narrow space where there is no opening and closing space for the door.
  ・ Knockouts for exposed wiring are provided on the top, bottom, left, and right sides of the cover, allowing entry and exit from anywhere.

  CAD ：

  2D

  Standard Price:	SGD 52.12-
  Days to Ship:	6 Day(s) or more

• 

  PTM-BB / FTTH BB Plastic Box / Standard

  NITTO KOGYO

  PTM-BB series box is a plastic broadband box for compactly stowing FTTH communications equipment.
  
  [Features]
  · Plastic box exposed communications equipment in existing buildings that does not require embedding.
  · Compact storage of telecommunications equipment, optical connection boxes, HUBs, distributors, and telephone terminals for collective housing buildings or a single unit home.
  ▪ Wiring and communications equipment designed for FTTH applications can be neatly stored.
  ▪ Installation space is compact thanks to a two-unit structure.
  · Exposed model is suitable for existing buildings as there is no need to perform embedding in a wall.
  · An environmentally friendly model that utilizes biomass plastic (polylactic acid) and a styrene-based resin model are available.

  CAD ：

  2D

  Standard Price:	SGD 187.20
  Days to Ship:	6 Day(s) or more

• 

  RA-Y・RA Series Control Panel Cabinet / Oblong

  NITTO KOGYO

  RA-Y series is a cabinet with a waterproof flat handle and a drainage mechanism as well as waterproof, and dust proof sealing.
  
  [Features]
  · A control panel cabinet with a waterproof flat handle and a drainage mechanism as well as waterproof, and dust proof sealing.
  · The cabinet is short and oblong for use in areas such as the spaces below production lines.
  · The door includes a stay and opens to a 95-degree angle.
  · A locking waterproof flat handle with superior functionality and design characteristics is used (Key No. N200)

  CAD ：

  2D

  Standard Price:	SGD 402.77-
  Days to Ship:	8 Day(s) or more

• 

  SR / Stainless Steel SR Series Control Panel Cabinet (with Water Repelling, Waterproof, Dust Proof Sealing)

  NITTO KOGYO

  SR series is a control panel cabinet with water drainage and waterproof and dustproof sealing. Uses a lockable waterproof flat handle.
  
  [Features]
  · A stainless steel control panel cabinet with water drainage and waterproof and dustproof sealing. Uses a lockable stainless steel, waterproof flat handle.
  · Stainless steel is used as a material.
  · Available with coating (clear coating) and without coating.

  CAD ：

  2D

  Standard Price:	SGD 475.75-
  Days to Ship:	5 Day(s) or more

• 

  B-L_S-L Thermal Equipment Housing Cabinet

  NITTO KOGYO

  [Features]
  • B-L_S-L series comes with a radiation vent suitable for housing in heat generation equipment.
  · The heat releasing effect is enhanced by providing ventilation ports on 3 surfaces, both side surfaces and the door surface.
  • Stability equipment 400 W and 1000 W house up to 12 units of each.
  • Mounting of ventilation brackets is possible on body and doors.

  CAD ：

  2D

  Standard Price:	SGD 378.34-
  Days to Ship:	5 Day(s) or more

• 

  Cabinet Compliant with FUL Machinery Safety Standards (Includes Door-Locking Nut)

  NITTO KOGYO

  Cabinet for factory automation machines that has TÜV/UL certification and is compliant with CE marking in consideration of machine safety.
  [Features]
  ・ Locked handle and door fixing screw (M5, top and bottom) prevent outsiders from easily unlocking.
  ・ By using a hot-dip coated steel plate panel, conductivity can be secured by contact with the mounting equipment, so paint stripping is not necessary and equipotential bonding connection is easy.
  ・ The steel board standardly uses a structure that is electrically connected to the body.
  ・ Since 24 (M4 to M10) ground terminals are provided, connection is possible even for there are many input power supplies.
  ・ The optional steel board supports a variety of layouts and realizes significant space savings.
  ・ By arranging the handle part outside the body opening, the use range of the board surface is widened.

  CAD ：

  2D

  Standard Price:	SGD 897.01-
  Days to Ship:	10 Day(s) or more

Loading...