MISUMI Air Nozzles（Spray Pattern：Point）

• 

  Air Blow Nozzle. Male/Female Thread, Knurling, Terminal Block, Non-Annealed

  MISUMI

  ◆Features: You can choose from male thread (annealed or non-annealed), female thread (annealed or non-annealed), knurled iris (annealed), or terminal block (annealed).
  
   *Annealed pipes with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outer diameter 4.0 or more is not allowed)
   The minimum bending radius is outer diameter x 3, and please bend carefully to avoid applying stress to the brazed part.
  
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  From August 2021, we will be adding nominal size standards.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Point Nozzles - Compact

  MISUMI

  Compact Nozzles adjustable to any angle.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 38.75-
  Days to Ship:	6 Day(s) or more

• 

  Air Blow Nozzles - Pipe Nozzles

  MISUMI

  ◆Features: Straight type, male thread type, and female thread type are available.
      *When using male or female thread types, we recommend using a nozzle joint to blow at the desired angle.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• • On Sale Till 31/03/2025

  

  Air Blow Nozzle Male/Female Thread, Height Adjustment, Strut Clamp Mounting, Duplex Male Thread, Barbed Fitting, Hose Nipple

  MISUMI

  ◆Features: Male/female thread type, height adjustment male/female thread type, post clamp mounting type, 2-core male thread type,     Barb joint type, hose nipple type You can choose from.
      *Pipe with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outside diameter 4.0 or more is not possible)
      Please bend carefully, using the outside diameter x 3 as a guideline for the minimum bending radius.
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  Nominal size standards will be added from August 2021.
  (*ABNZSL2-8.0 and ABNZS2-8.0 are scheduled to be released on September 20, 2021.)

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Point Nozzles

  MISUMI

  ◆Features: Point nozzle that can be adjusted at any angle by tightening the hexagonal nut.
  ◆Air source: Compressor◆Injection shape: Point

  CAD ：

  2D / 3D

  Standard Price:	SGD 36.12-
  	Special Price
  Days to Ship:	Same day or more

• 

  Nozzles with Swaged Sleeve Couplings

  MISUMI

  "Can blow the air from the copper pipe efficiently, by attaching to the pipe."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.37-
  Days to Ship:	4 Day(s) or more

• 

  Air Blow Nozzles - Copper Pipes for Air Blow

  MISUMI

  ◆Features: Male thread type (straight or with orifice at the end) and female thread type (straight) are available.
      The materials of the pipes are annealed copper tube (C1220T-0) and copper tube (C1220T).

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Air Blow Nozzles - Nozzles with Attachment Plate - 1-Hole Type, 2-Hole Type

  MISUMI

  ◆Features: A product that can be used by directly inserting a tube with an inner diameter of φ2.5.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Point Nozzles - Reverse Flow Prevention

  MISUMI

  Point Nozzles with Built-in Check Valve Mechanism.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 43.80-
  Days to Ship:	6 Day(s) or more

• 

  [Clean & Pack]Nozzles with Swaged Sleeve Fitting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: A SUS304 nozzle that can be connected directly to a pipe and is recommended for pinpoint blowing.
      By mounting it to the tip of the copper pipe, the air efficiency can be improved compared to when using only the copper pipe.
      The tip shape is selectable from slit (SKNF) and single hole (SKNS).
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆ Max. Operating Pressure: 0.7 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆See here for Technical Data (SKNF)
  ◆See here for Technical Data (SKNS)
  
  
  

  • Volume Discount

  Standard Price:	SGD 21.90-
  Days to Ship:	8 Day(s) or more

• 

  [Clean & Pack]Flow Rate Control Nozzle

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: The flow rate can be adjusted without using a speed controller.
      This product has lock mechanism to fix at arbitrary positions.
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆Heat Resistant Temperature: 60°C
  
  ◆ For Technical Data, see here.
  ◆See here for product video
  
  
  

  • Volume Discount

  Standard Price:	SGD 31.60
  Days to Ship:	8 Day(s) or more

• 

  Air Nozzles - De Laval Type

  MISUMI

  ◆Features: This air nozzle is capable of blowing at sonic speeds due to its special internal structure.
      A metal air nozzle with powerful ejection force by blowing at the speed of sound.
      Materials include A5052 and SUS303.
  
  ◆Air source: Compressor◆Injection shape: Point
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 200℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 47.17-
  Days to Ship:	Same day or more

• 

  Flow Rate Control Nozzles

  MISUMI

  Air Nozzles which allow for adjustment of the flow rate.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 32.00
  Days to Ship:	4 Day(s) or more

• 

  Point Nozzles - Air Amplified

  MISUMI

  ◆ Features: Space-saving design with an overall length of approximately 45 mm.
  Made with PPS resin to reduce cost while improving oil resistance and heat resistance.
      An amplified point nozzle that blows while including the surrounding air.
      Provides high colliding force with a small amount of air, reducing compressor air consumption and saving energy.
  The connecting port has a hexagonal hole shape, making it easy to replace.
  
  ◆ Applications: Suitable for a range of applications such as cleaning automobile parts.
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆ Max. Operating Pressure: 0.7 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ Free sample rental available here
  ◆ For Application Examples, see here.
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 13.82
  Days to Ship:	4 Day(s) or more

Loading...