(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Days to Ship |
|
---|
NIIGATA SEIKI (SK)
JCSS calibration is also enabled (30.00 mm or less), the most popular steel pin gauge set type.
[Features]
· Sub-zero treatment applied.
· Pin gauges of 1.000 mm or more are engraved with the nominal dimensions of the pin gauge.
· AA-0A to AA-9B sets include an aluminum pin vise, AA-0E to AA-6F sets include a general pin vise.
· With pass certification.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 267.90- |
---|---|
Days to Ship: | Same day or more |
Pin Gauge Set EM Series (+ or - tolerance)
EISEN
[Features]
·A popular pin gauge set that can be used for many purposes.
·Nominal dimensions are displayed on the plastic case up to 1.525 mm.
Standard Price: | SGD 452.16- |
---|---|
Days to Ship: | 7 Day(s) or more |
NIIGATA SEIKI (SK)
A pin gauge manufactured to plus/minus 2 to 5 μm with respect to the nominal size.
[Features]
· Sub-zero treatment applied.
· Pin vise is not included.
· PG-00 and PG-3 have different increment sizes.
· In the range of 13.000 mm to 19.000 mm, the diameter precision is within plus or minus 1 to 5 µm of the nominal dimension.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 360.72- |
---|---|
Days to Ship: | 4 Day(s) or more |
NIIGATA SEIKI (SK)
Pin gauge focusing on even higher accuracy. JCSS calibration is also enabled.
[Features]
· Sub-zero treatment applied.
· Pin gauges of 1.000 mm or more are engraved with the nominal dimensions of the pin gauge.
· Products offering the highest level of quality.
· 0.001 mm increments.
· Accuracy: up to 0.100 mm-7.010 mm: ±0.3 µm, up to 7.011 mm- 10.000 mm: ±0.5 µm.
· Circularity/cylindricity: 0.3 μm from 0.100 mm to 7.010 mm, 0.5 μm from 7.011 mm to 10.000 mm.
· With pass certification.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 667.20- |
---|---|
Days to Ship: | 4 Day(s) or more |
Sub-Micron Accuracy Pin Gauge Set (0.001 Step) DT Series
DOM
[Features]
· 0.001‑mm step and a dimensional tolerance of ±0.3μm to meet accuracy needs.
· Pin gauge that enables high accuracy measurements.
· This set has a total of 14 different sizes, including the set standard size, 3 negative sizes and 10 positive sizes with a 0.001‑step.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 754.28- |
---|---|
Days to Ship: | 25 Day(s) or more |
Steel Pin Gauge Set AG Series (with Shank)
NIIGATA SEIKI (SK)
A set of carbide AA series pin gauges embedded in plastic shanks.
[Features]
· Little thermal expansion when held manually for use, improving operability.
· The gauge size is printed on the shank.
· Sub-zero treatment applied.
· 0.01 mm increments.
· Perform measurements with bare hands, because the shank will keep dirt on hands from soiling the gauge.
· Simple handling due to reduced temperature changes from body temperature.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 554.02- |
---|---|
Days to Ship: | 22 Day(s) or more |
NIIGATA SEIKI (SK)
A pin gauge set that combines frequently used items.
[Features]
· JCSS calibration is also enabled. (30.00 mm or less)
· Sub-zero treatment applied.
· Pin gauges of 1.000 mm or more are engraved with the nominal dimensions of the pin gauge.
· 0.050 mm increments.
· Accuracy and specification are the same as the AA series.
· Pin vise is not included.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 187.66- |
---|---|
Days to Ship: | 11 Day(s) or more |
Steel Pin Gauge Set AAP Series
NIIGATA SEIKI (SK)
Pin gauge set combining intermediate sizes from the AA series.
[Features]
· JCSS calibration is also enabled. (30.00 mm or less)
· A set that combines frequently used items.
· Sub-zero treatment applied.
· Pin gauges of 1.000 mm or more are engraved with the nominal dimensions of the pin gauge.
· 0.010 mm increments.
· Accuracy and specification are the same as the AA series.
· Pin vise is not included.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 601.82- |
---|---|
Days to Ship: | 25 Day(s) or more |
NIIGATA SEIKI (SK)
A pin gauge set that combines frequently used items.
[Features]
· JCSS calibration is also enabled. (30.00 mm or less)
· Sub-zero treatment applied.
· Pin gauges of 1.000 mm or more are engraved with the nominal dimensions of the pin gauge.
· 0.100 mm increments.
· Accuracy and specification are the same as the AA series.
· Pin vise is not included.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 394.74- |
---|---|
Days to Ship: | 11 Day(s) |
Steel Pin Gauge Set Grade 1 EH/ER/EL Series
EISEN
[Features]
·Combination set of EH, EP and ECP.
·Nominal dimensions are displayed on the plastic case up to 0.995 m.
·For 1.00 mm or more, the nominal dimensions are engraved by laser on the pin gauge.
Standard Price: | SGD 253.80- |
---|---|
Days to Ship: | 21 Day(s) or more |
NIIGATA SEIKI (SK)
A pin gauge set with a ±0.05 mm range, using close-fitting dimensions as a reference.
[Features]
· JCSS calibration is also enabled. (30.00 mm or less)
· A set that combines frequently used items.
· Sub-zero treatment applied.
· Pin gauges of 1.000 mm or more are engraved with the nominal dimensions of the pin gauge.
· 0.010 mm increments.
· Accuracy and specification are the same as the AA series.
· Pin vise is not included.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 530.97- |
---|---|
Days to Ship: | 25 Day(s) or more |
Carbide Pin Gauge Set TAG Series (with shank)
NIIGATA SEIKI (SK)
A set of carbide TAA series pin gauges embedded in plastic shanks.
[Features]
· Little thermal expansion when held manually for use, improving operability. Contamination from hands does not adhere to the gauge.
· Excellent abrasion resistance and very economical with a lifespan approximately 20 to 30 times longer than steel. (100x for honing work)
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· 0.01 mm increments.
· High hardness eliminates worries about scratching the surface. No dimension change even if broken. (bulges at creases/bends)
· Gauge management is easy. (The periodic gauge inspection interval is lengthened, making it economical.)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 2,333.47- |
---|---|
Days to Ship: | 7 Day(s) or more |
Gauge Steel Pin Gauge Set (Multiple Diameter Set Type)
MISUMI
[Features]
·A value set for customers who purchase multiple diameters.
·Light chamfers at the tips.
Days to Ship: | 6 Day(s) or more |
---|
NIIGATA SEIKI (SK)
A pin gauge manufactured to plus/minus 0 to 2 μm with respect to the nominal size.
[Features]
· Pin gauges of 1.00 mm or more are printed with P for plus, M for minus, and the dimensions of the pin gauge.
· Sub-zero treatment applied.
· 0.01 mm increments.
· Pin vise included. (PM-0B to PM-6B only)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 392.22- |
---|---|
Days to Ship: | 25 Day(s) or more |
Pin Gauge Set EP Series Grade 0 (0.20 - 20.00 mm, 0.01 mm increment)
EISEN
[Features]
· Pin gauge set with 0.01‑mm clearance
· Grade 0 is with the actual measurement data
Standard Price: | SGD 518.35- |
---|---|
Days to Ship: | 7 Day(s) or more |
Steel Pin Gauge Set Grade 0 EH/ER/EL Series
EISEN
[Features]
· EP and ECP combination set
· Grade 0 is with the actual measurement data
Standard Price: | SGD 303.31- |
---|---|
Days to Ship: | 21 Day(s) or more |
Pin Gauge with Maintenance Line, AML Series
NIIGATA SEIKI (SK)
Pin gauge with maintenance lines to check the wear on the tip with lines on both ends of the pin gauge.
[Features]
· All products sub-zero treated.
· Lines are engraved on both ends of the pin gauge for checking wear, making it easy to recognize wear on the tip, previously hard to confirm.
· When the line disappears, that means approximately 1 μm or more has been worn.
[Applications]
· Can be used for measuring hole diameter or standard inspections using micrometers, vernier calipers, etc.
· Ideal for those who are concerned about the state of wear and perform frequent shallow hole accuracy confirmation.
Standard Price: | SGD 384.01- |
---|---|
Days to Ship: | 9 Day(s) or more |
Carbide Pin Gauge Set TAA Series
NIIGATA SEIKI (SK)
Pin gauge set that enables JCSS calibration.
[Features]
· Excellent abrasion resistance and very economical with a lifespan approximately 20 to 30 times longer than steel. (100x for honing work)
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· 0.01 mm increments.
· High hardness eliminates worries about scratching the surface.
· No dimension change even if broken. (bulges at creases/bends)
· Gauge management is easy. (The periodic gauge inspection interval is lengthened, making it economical.)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 2,100.40- |
---|---|
Days to Ship: | 11 Day(s) or more |
Ceramic Pin Gauge Set CAA Series
NIIGATA SEIKI (SK)
Ceramic pin gauge has excellent durability that eliminates concerns about rust, and is exceptionally workable and economical. JCSS calibration is also enabled.
[Features]
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time with no need to worry about rust or corrosion.
· Very easy to maintain and manage after use. There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Material with a thermal expansion coefficient almost identical to steel. Nonmagnetic material that will not become magnetized.
· 0.01 mm increments.
· Pin gauges of 1.50 mm or more are laser marked with the nominal dimensions of the pin gauge.
· Material: Ceramic. (Zirconia)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 1,375.63- |
---|---|
Days to Ship: | 25 Day(s) or more |
Pin Gauge Set EP Series Grade 1
EISEN
[Features]
· Pin gauge set with 0.01‑mm clearance starting from a minimum nominal dimension of 0.05 mm
Standard Price: | SGD 430.79- |
---|---|
Days to Ship: | 7 Day(s) or more |
Pin Gauge Set (0.005 Step) DH Series
DOM
[Features]
· Combines the DP Series and DX Series for a variety of sets.
· Set with 0.005‑mm step.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 426.73- |
---|---|
Days to Ship: | 25 Day(s) or more |
Pin Gauge Set (0.05‑mm Step, Nominal Dimension From 0.20 mm) DL Series
DOM
[Features]
· Combines the DP Series and DX Series for a variety of sets.
· Set with 0.05‑mm step.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 247.42- |
---|---|
Days to Ship: | 25 Day(s) or more |
Pin Gauge Set (0.1‑mm Step, Nominal Dimension From 0.20 mm) DR Series
DOM
[Features]
· Combines the DP Series and DX Series for a variety of sets.
· Set with 0.1‑mm step.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 445.01- |
---|---|
Days to Ship: | 11 Day(s) or more |
Pin Gauge Set With Handle (0.01 Step) DS Series
DOM
[Features]
· This product has a DP Series pin embedded in the plastic handle.
· The nominal dimensions are displayed on the handle.
· The added handle provides a large thermal insulation effect and faster operations for when used frequently.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 700.46- |
---|---|
Days to Ship: | 25 Day(s) or more |
Pin Gauge Set For + or - Tolerance (0.10 Step) DM Series
DOM
[Features]
· Popular multi-purpose pin gauge set.
· In terms of its nominal dimensions, it is manufactured at an accuracy of within ±2 to 5 μm (±1 to 5 μm for Dm-3) for multi-purpose use as an inspection tool.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 892.90 |
---|---|
Days to Ship: | 25 Day(s) or more |
Ceramic Pin Gauge Set CAG Series (with Shank)
NIIGATA SEIKI (SK)
Ceramic pin gauge has little thermal expansion when held manually use, and is exceptionally workable and economical.
[Features]
· A set of carbide CAA series pin gauges embedded in plastic shanks.
· With a shank attached, measurement can be made with bare hands, and dirt from hands does not adhere. Simple handling due to minimal temperature changes from body temperature.
· Exceptional wear resistance in comparison with steel, and strongly resistant to changes over time, with no need to worry about rust or corrosion, and extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Nonmagnetic material that will not become magnetized.
· 0.01 mm increments. There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Material: Ceramic. (Zirconia)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Standard Price: | SGD 1,716.00- |
---|---|
Days to Ship: | 7 Day(s) or more |
Pin Gauge Set (0.01‑mm Step, Nominal Dimension From 0.05 mm) DP Series
DOM
[Features]
· Pin gauge set with 0.01‑mm step starting from a minimum nominal dimension of 0.05 mm.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 360.24- |
---|---|
Days to Ship: | 9 Day(s) or more |
Pin Gauge Set For + or - Tolerance (0.01 Step) DM Series
DOM
[Features]
· Popular multi-purpose pin gauge set.
· In terms of its nominal dimensions, it is manufactured at an accuracy of within ±2 to 5 μm (±1 to 5 μm for Dm-3) for multi-purpose use as an inspection tool.
[Applications]
· Measuring the inner diameter of holes.
Standard Price: | SGD 393.30 |
---|---|
Days to Ship: | 25 Day(s) or more |
Brand |
---|
Product Series |
Days to Ship |
Gauge Diameter |
Set / Single Item Classfication |
Product Model |
Material |
Brand | NIIGATA SEIKI (SK) | EISEN | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | DOM | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | EISEN | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | MISUMI | NIIGATA SEIKI (SK) | EISEN | EISEN | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | EISEN | DOM | DOM | DOM | DOM | DOM | NIIGATA SEIKI (SK) | DOM | DOM |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Pin Gauge Set EP Series Grade 0 (0.20 - 20.00 mm, 0.01 mm increment) | Pin Gauge Set (0.05‑mm Step, Nominal Dimension From 0.20 mm) DL Series | Pin Gauge Set (0.1‑mm Step, Nominal Dimension From 0.20 mm) DR Series | Pin Gauge Set (0.01‑mm Step, Nominal Dimension From 0.05 mm) DP Series | ||||||||||||||||||||||||
Days to Ship | Same day or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 25 Day(s) or more | 22 Day(s) or more | 11 Day(s) or more | 25 Day(s) or more | 11 Day(s) | 21 Day(s) or more | 25 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 25 Day(s) or more | 7 Day(s) or more | 21 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 25 Day(s) or more | 7 Day(s) or more | 25 Day(s) or more | 25 Day(s) or more | 11 Day(s) or more | 25 Day(s) or more | 25 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 25 Day(s) or more |
Gauge Diameter | 0.06~0.290 ~ 19.50~20.00 | 0.10, 0.11 to 0.29 ~ 13.0, 13.1 to 19.0 | 0.100~0.290 ~ 13.000~19.000 | 0.297~0.310 ~ 6.997~7.010 | 0.3 ~ 10 | 0.20 to 0.50 ~ 9.50~10.00 | 0.200~1.000 ~ 18.50~20.00 | 0.505~1.005 ~ 9.505~10.005 | 1.000~5.000 ~ 15.00~20.00 | 0.20, 0.25 to 1.00 ~ 18.50, 18.55 to 21.00 | 5.950~6.050、6.950~7.050、7.950~8.050、8.950~9.050、9.950~10.05 ~ 10.95~11.05、11.95~12.05、12.95~13.05、13.95~14.05、14.95~15.05 | 0.50~1.00 ~ 9.50~10.00 | - | 0.20 to 0.50 ~ 9.50~10.00 | 0.20, 0.21 to 0.50 ~ 8.50, 8.51 to 9.00 | 0.100, 0.105 to 0.250 ~ 9.750, 9.755 to 10.000 | 3.000~3.500 ~ 9.500~10.000 | 0.50~1.00 ~ 9.50~10.00 | 0.50~1.00 ~ 9.50~10.00 | 0.20, 0.21 to 0.50 ~ 18.50, 18.51 to 19.00 | ERROR:#VALUE! | ERROR:#VALUE! | ERROR:#VALUE! | ERROR:#VALUE! | ERROR:#VALUE! | 0.50~1.00 ~ 9.50~10.00 | ERROR:#VALUE! | ERROR:#VALUE! |
Set / Single Item Classfication | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
Product Model | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge |
Material | Gauge Steel | - | Gauge Steel | Gauge Steel | - | Gauge Steel | - | - | - | Gauge Steel | - | Carbide | Gauge Steel | Gauge Steel | - | Gauge Steel | - | Carbide | Ceramic | - | - | - | - | - | - | Ceramic | - | - |
Loading...
How can we improve?
How can we improve?