Vernier Calipers（Waterproof Function：NA）

• • On Sale Till 31/03/2025

  

  Vernier Caliper, Digital Calipers Made From Carbon Fiber

  SHINWASOKUTEI

  Calipers used for various dimensional measurements.
  [Features]
  · Made from digital carbon fiber, it is lightweight, non-rusting, and non-scratching.
  · With auto power off function which automatically switches off power after 5 minutes in the non-operational state.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement (150 mm), and step measurement.

  Standard Price:	SGD 23.45-
  	Special Price
  Days to Ship:	Same day

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper E-LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Long jaw calipers with "long length jaw" ideal for measuring large diameter pipes, etc.
  · Outer jaw length is 1/2 or more of the measurement length, ideal for diameter measurement of spheres, pipes, etc.
  · Printer output function included

  Standard Price:	SGD 3,243.80
  Days to Ship:	8 Day(s)

• 

  [Kanon] Vernier Caliper SCM

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · The jaw tip is thin, enabling measurement of narrow sections that can be read with high precision

  Standard Price:	SGD 455.10-
  Days to Ship:	9 Day(s) or more

• 

  Digital Vernier Calipers (High-Speed Model LCD)

  TRUSCO NAKAYAMA

  [Features]
  · Features a high-speed model LCD.
  · Digital display for clear viewing.
  · With hold function.
  · Comes with complete inspection tables.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  Standard Price:	SGD 92.30-
  Days to Ship:	4 Day(s) or more

• 

  Silver Vernier Caliper TVC, Standard-Type

  NIIGATA SEIKI (SK)

  Vernier integrated type standard M calipers with an easy-to-read scale that enable measuring O.D., I.D., steps, and depth.
  [Features]
  · High cost performance model.
  · M type standard calipers.
  · Vernier integrated type with a scale that is easy to read.
  · Silver finish.
  [Applications]
  · Can be used for measuring outer diameter, inner diameter, level difference and depth (4-way).

  Standard Price:	SGD 553.72-
  Days to Ship:	8 Day(s)

• 

  Digital Vernier Calipers (Maximum Measurement Length 150 to 200 mm)

  MISUMI

  A standard-type digital vernier caliper.
  · Usable for measurement of outer diameter, internal diameter, step difference, and depth.
  · Digital display for easy reading.
  · With holding function.

  Standard Price:	SGD 140.50
  Days to Ship:	Same day

• 

  Digital calipers with mini hold function

  SHINWASOKUTEI

  Calipers that can perform outer diameter and inner diameter measurement, depth measurement, step measurement, comparison measurement, and indirect measurement.
  [Features]
  · Digital display can be understood at a glance.
  · The minimum read value is 0.01 mm, ideal for extremely precise work.
  · With zero setting function to enable relative measurements and indirect measurements.
  · Equipped with a hold function that's useful when the display is not visible.
  · The unit features a drip-proof structure.
  [Applications]
  · Used for various dimensional measurements.

  Standard Price:	SGD 65.93
  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  Portable Vernier Calipers

  SHINWASOKUTEI

  Pocket calipers used for various dimensional measurements.
  [Features]
  · Small, conveniently portable calipers.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Standard Price:	SGD 12.35
  	Special Price
  Days to Ship:	Same day

• 

  Digital Vernier Calipers With Large Text And Hold Function (150 mm / 200 mm / 300 mm / 450 mm / 600 mm / 1,000 mm)

  SHINWASOKUTEI

  Digital indicator calipers where there is no need to read the main scale. Equipped with a hold convenient for measuring places where the LCD unit is not visible. The minimum read value is 0.01 mm, ideal for extremely precise work.
  [Features]
  · With zero setting function to enable relative measurements and indirect measurements.
  · A hold function is useful when the display is not visible.
  · Drip-proof unit parts.
  (Can be used when wet if immediately wiped dry.)
  [Applications]
  · External measurements, internal measurements, step measurements, depth measurements

  Standard Price:	SGD 143.57-
  Days to Ship:	Same day or more

• 

  [Kanon] Vernier Caliper, Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  The flat head makes it easy to measure from any corner.
  [Features]
  ·The design has been completely redesigned! A wide variety of sizes are also available.
  ·Digital type pita calipers.
  ·The display is large and easy to read.
  
  List of vernier calipers List of standard vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	SGD 143.57-
  Days to Ship:	Same day or more

• 

  [Kanon] Flat Head Caliper PITA

  NAKAMURASEISAKU

  [Features]
  · 21st century standard calipers, Pita calipers.
  · "Flat head" enables easy measurement from any corner.
  · PITA15: The main scale grooves on the top and bottom scales reduce diffuse reflection on the surface with the scale markings.
  · Because the green color is easy on the eyes, they don't get tired.

  Standard Price:	SGD 74.80-
  Days to Ship:	4 Day(s) or more

• 

  Vernier Caliper, Plastic Calipers, Free-stage Scale, Light

  NIIGATA SEIKI (SK)

  The stepped scale on the calipers prevents erroneous reading.
  [Features]
  · A plastic product that can be used casually.
  · A stepped scale with easy-to-read 1 mm graduations has been adopted.
  · With convenient 1 mm read-off vernier for when detailed numbers are unnecessary.
  · With blank sticker to customize the scale to suit the application.
  · With magnet and strap hole convenient for storage and carrying.
  [Applications]
  · Used for measuring outer diameter, inner diameter, level difference and depth.

  Standard Price:	SGD 10.00-
  Days to Ship:	8 Day(s)

• 

  LR Vernier Caliper

  NIIGATA SEIKI (SK)

  Forward/backward Vernier scales improve performance with the 2 prong approach, as they enable measurements to be made with both left and right hands.
  [Features]
  · Upper/lower 2-tier type Vernier scale.
  · Supports both right and left hands, and measurement can be performed with either hand.
  · Forward/backward Vernier scales improve performance with the 2 prong approach.
  · Silver finish.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Standard Price:	SGD 71.97-
  Days to Ship:	8 Day(s)

• 

  Vernier Caliper

  SHINWASOKUTEI

  Standard calipers.
  [Features]
  · Standard type and easy to use.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Standard Price:	SGD 45.70-
  Days to Ship:	Same day or more

• 

  [Kanon] Vernier Caliper, Dial Scale Caliper DMK-J

  NAKAMURASEISAKU

  [Features]
  · Rack and pinion type caliper.
  · The improved shock resistance allows use with no concerns.
  · Pointer needle 1 revolution 1 mm.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · Used for on-site measurements of precision machining.

  Standard Price:	SGD 143.60-
  Days to Ship:	8 Day(s)

• 

  Digital Vernier Calipers, Left-Handed

  NIIGATA SEIKI (SK)

  Digital calipers dedicated for left-handed people.
  [Features]
  · Clearly visible digital display.
  · Material: Stainless steel
  · Power supply: SR44 (silver oxide battery) x 1 included for testing.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Standard Price:	SGD 209.73-
  Days to Ship:	4 Day(s) or more

• 

  Mini Vernier Calipers, High Grade

  SHINWASOKUTEI

  High-class, high-precision mini calipers that can be used for measuring various dimensions, small as they are.
  [Features]
  · Small, conveniently portable calipers.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Standard Price:	SGD 33.30-
  Days to Ship:	8 Day(s)

• 

  [Kanon] Vernier Caliper, Centerline Caliper E-RM-J

  NAKAMURASEISAKU

  Two measurements are possible. Multifunctional round hole pitch vernier caliper.
  [Features]
  ·Both the hole-to-hole pitch and the pitch from the end face to the hole can be "directly read with a single tool".
  ·It can be read directly by offset input.
  ·By setting the upper offset value (15.00 mm) and the lower offset value (7.50 mm), this machine displays the measured pit dimensions in actual size, eliminating the need to calculate additions and subtractions to the displayed values like conventional products. has become much easier to use.
  ·With this single vernier caliper, you can directly read the pitch from hole to hole and the pitch from the edge to the hole.
  [Applications]
  ·Sheet metal processing products and construction housing.
  ·The upper and lower offset values can be easily set by pressing the "SET" button.
  
  List of vernier calipers List of hole pitch vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	SGD 1,019.38-
  Days to Ship:	8 Day(s)

• 

  [Kanon] Vernier Caliper For Inside Measurement ICM

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · The jaw length is available in two types, 56 mm and 76 mm

  Standard Price:	SGD 1,004.40-
  Days to Ship:	12 Day(s) or more

• 

  Vernier Calipers

  KTC(KYOTO TOOL)

  [Features]
  · Adopts long vernier for easy reading.
  · Gradation surface is stepped to prevent particles from entering the drive portion.

  Standard Price:	SGD 104.46-
  Days to Ship:	8 Day(s)

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Standard Price:	SGD 182.40-
  Days to Ship:	8 Day(s)

• 

  [Kanon] Centerline Caliper E-RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch: Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch" and "offset types" because the measuring element moves vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	SGD 1,058.09-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Standard Calipers M

  NAKAMURASEISAKU

  Standard vernier calipers for regular measurements

  Standard Price:	SGD 831.80-
  Days to Ship:	8 Day(s)

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Ideal for diameter measurement of large bore pipes, etc.

  Standard Price:	SGD 405.28-
  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Standard Price:	SGD 653.10
  Days to Ship:	8 Day(s)

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  Standard Price:	SGD 196.10-
  Days to Ship:	4 Day(s) or more

• 

  Vernier Caliper, Left Handed

  NIIGATA SEIKI (SK)

  Calipers dedicated for left-handed people.
  [Features]
  · Material: Stainless steel
  · Silver finish.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Standard Price:	SGD 122.54
  Days to Ship:	8 Day(s)

• 

  Dial Vernier Caliper DVC

  NIIGATA SEIKI (SK)

  Calipers with a Vernier scale that can be read with a dial, preventing parallax errors and misreadings.
  [Features]
  · A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.
  · Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.
  · Uses a clearly visible yellow scale plate.
  · Material: Stainless steel.
  · Silver finish.
  [Applications]
  · Outer diameter, inner diameter, level difference and depth measurements are possible.

  Standard Price:	SGD 118.24-
  Days to Ship:	6 Day(s) or more

• 

  C Surface Vernier Caliper

  TOEIKOGYO

  [Features]
  · With scale lines calculated based on the Pythagorean theorem, C surface dimensions and welding dimensions can be measured accurately and quickly.
  · Vernier scale enables C-surface dimension measurements from 0.1 mm to 15 mm.
  [Applications]
  · Milling, Weld Beveling, Lathe Machining, Scribing
  [Material]
  · Main unit: SPHC-P, phosphate galvanizing treatment
  · Main Scale: SUS420J2, Silver Plating

  Standard Price:	SGD 76.69
  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RX-J

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Pitch measurement is also possible between stepped holes.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measurement at hole drilling sites.

  Standard Price:	SGD 1,414.10
  Days to Ship:	8 Day(s)

• 

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  Standard Price:	SGD 752.50-
  Days to Ship:	8 Day(s)

• 

  [Kanon] Centerline Caliper RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for pitch measurement of holes with different diameters.
  · Round hole pitch calipers of “offset type," with main scale probe moving vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  Standard Price:	SGD 834.63-
  Days to Ship:	6 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-S

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch of small diameter holes.
  · Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch"

  Standard Price:	SGD 727.60
  Days to Ship:	13 Day(s)

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	SGD 2,123.20
  Days to Ship:	10 Day(s)

• 

  [Kanon] Centerline Caliper E-RM30DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch from wall surfaces.
  · A multifunction, direct reading type, digital round hole pitch caliper, with which "3 measurements" can be enabled by replacing the gauge head.

  Standard Price:	SGD 1,192.20
  Days to Ship:	Quote

• 

  [Kanon] Standard Calipers SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers
  
  [Features]
  · Standard vernier calipers for regular measurements.
  · Standard scale type calipers with "green lines" that don't tire the eyes

  Standard Price:	SGD 87.70
  Days to Ship:	7 Day(s)

• 

  [Kanon] Standard Calipers M-60P

  NAKAMURASEISAKU

  [Features]
  · Standard vernier calipers for regular measurements.
  · Lightweight calipers which, despite a long measurement length, can be held comfortably in one hand.
  · Reasonably priced too

  Standard Price:	SGD 528.20
  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Caliper with Curre Jaw RA

  NAKAMURASEISAKU

  [Features]
  · Made of stainless steel (SUS420J2).
  · Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.
  [Applications]
  · For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  Standard Price:	SGD 917.00-
  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Caliper for Narrow Spaces ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  Standard Price:	SGD 658.75-
  Days to Ship:	6 Day(s) or more

• 

  [Kanon] Short Leg Caliper SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  Standard Price:	SGD 652.04-
  Days to Ship:	10 Day(s)

• 

  [Kanon] Vernier Caliper SCML

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · Long jaw-type SCM

  Standard Price:	SGD 703.90-
  Days to Ship:	10 Day(s)

• • On Sale Till 31/03/2025

  

  Flat Calipers Pocket

  SHINWASOKUTEI

  Calipers used for various dimensional measurements.
  [Features]
  · Lightweight, compact, and easy to carry.
  · With a strap hole.
  · Made of sturdy polycarbonate resin which contracts and expands very little with fluctuations in temperature.
  · No concern needed about scratching the measured object or generation of rust.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Standard Price:	SGD 7.47-
  	Special Price
  Days to Ship:	Same day or more

• 

  Caliper Attachment

  NIIGATA SEIKI (SK)

  Caliper attachment for enabling point measurements in tight spaces just by mounting to calipers
  [Features]
  · Attach to the outer jaws of calipers to enable use as point type calipers.
  · Ball probe on one side and pin type probe on the other. Ideal for measuring the thickness of pipes with a shape in which grooves have been cut into the exterior.
  [Applications]
  · Attaches to the outer jaws of calipers to enable measurement of concave surfaces.

  Standard Price:	SGD 253.59
  Days to Ship:	8 Day(s)

Loading...