Lathe Jigs（Page2）

• 

  Master Jaw (MJ) Master Jaw For 3-Jaw Chucks (TC/TA/FCT/A Types) (For 3-Jaw Chucks)

  KOBAYASHI IRON WORKS

  [Features]
  · Master jaw for TC type chucks.

  Standard Price:	SGD 909.62
  Days to Ship:	10 Day(s)

• 

  NAKANE Rotating Center, Standard Type LS

  SANYOSEISAKUSYO

  Secures high rigidity and durability while maintaining slim shape.
  [Features]
  · By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
  · General purpose waterproofing is realized during rotation because there is no opening in the forward direction.
  · Optimal for threading of thin objects, etc.

  Standard Price:	SGD 316.08-
  Days to Ship:	4 Day(s) or more

• 

  NAKANE Rotating Center, Bevel Type BS

  SANYOSEISAKUSYO

  For large diameter workpieces such as pipes.
  [Features]
  · Thickened shaft core and rigidity against load weight are optimal for high-precision heavy cutting.
  · Supports pipes and large I.D. workpieces. Lineup of MT2 to 4, 60° tip products.
  · Oil seal and O-ring prevent permeation of cutting fluid and cutting dust.

  Standard Price:	SGD 439.24-
  Days to Ship:	6 Day(s) or more

• 

  Kabuto Center KC

  KABUTO MFG

  [Features]
  · Regular model for general lathes.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	SGD 289.09-
  Days to Ship:	4 Day(s) or more

• 

  3-Jaw Scroll Chuck SC Series (Hard Jaw Type)

  OKUKAWATEKOUSYO

  [Features]
  · Includes both internal and external jaws that are interchangeable depending on the application.
  · High durability and economical, ideal for low volume production of a wide variety of goods.
  · Meehanite cast iron is used for the chuck main body. Superior durability and ideal for use at high-speed rotation.

  Standard Price:	SGD 655.14-
  Days to Ship:	9 Day(s) or more

• 

  Soft Jaw For HO High Jaw Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. HO High Jaw for Kitagawa Hydraulic/Air Chuck

  Standard Price:	SGD 116.08-
  Days to Ship:	7 Day(s) or more

• 

  Soft Jaw For B-200/B-200 Small Diameter Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. B-200/B-200 Small Diameter for Kitagawa Hydraulic/Air Chucks

  Standard Price:	SGD 51.85-
  Days to Ship:	6 Day(s) or more

• 

  Soft Jaw For N Long-Jaw Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. N Long Jaw for Kitagawa Hydraulic/Air Chuck

  Standard Price:	SGD 751.56-
  Days to Ship:	9 Day(s) or more

• 

  Soft Jaw For AL-HO/B-200/N/HJ Aluminum Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】

  GIGA SELECTION

  [Features] Good cutting performance that significantly reduces soft jaw molding time. The soft jaw material is soft and does not scratch the workpiece. Lower specific gravity compared to iron, curbing the decline in gripping power due to centrifugal force and enabling high-speed rotation cutting.

  Standard Price:	SGD 125.99-
  Days to Ship:	9 Day(s) or more

• 

  T-Nut (Jaw Nut) For Kitagawa Hydraulic/Pneumatic Chucks【3-6 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. For Kitagawa Hydraulic/Air Chucks

  Standard Price:	SGD 317.15-
  Days to Ship:	4 Day(s) or more

• 

  Soft Jaw For SBS Long-Jaw Kitagawa Scroll Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. SBS Long Jaw for Kitagawa Scroll Chuck

  Standard Price:	SGD 317.51-
  Days to Ship:	6 Day(s) or more

• 

  Soft Jaw For SBS Small-Diameter (Iron/Aluminum) Kitagawa Scroll Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. SBS Small Diameter (Steel/Aluminum) for Kitagawa Scroll Chuck

  Standard Price:	SGD 133.15-
  Days to Ship:	6 Day(s) or more

• 

  Soft Jaw For H011MC Howa Draw-Down Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. H011MC For Howa Drawdown Chuck

  Standard Price:	SGD 188.86-
  Days to Ship:	9 Day(s) or more

• 

  Soft Jaw For AL-HF Aluminum Nikko Hydraulic/Pneumatic Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. AL-HF Aluminum for Nikko Hydraulic/Air Chucks

  Standard Price:	SGD 168.02-
  Days to Ship:	7 Day(s) or more

• 

  Soft Jaw For STJ Victor (Nobel) Scroll Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. Made of S45C, and the jaw tip shape is flat.

  Standard Price:	SGD 109.60-
  Days to Ship:	6 Day(s) or more

• 

  Soft Jaw For WAK SMW Quick Jaw Change Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. Made of S45C, and the jaw tip shape is flat.

  Standard Price:	SGD 154.44-
  Days to Ship:	9 Day(s) or more

• 

  Soft Jaw for Scroll Chucks【3 Pieces Per Package】

  MISUMI

  Those which suit chucks of Kitagawa are available

  • Volume Discount

  Standard Price:	SGD 48.84-
  Days to Ship:	4 Day(s) or more

• 

  Nut Jaw【3 Pieces Per Package】

  MISUMI

  [Features]
  ·Lineup of compatible types for chucks made by Kitagawa in lathe processing
  ·Since it is raw material, alteration processing is easy, and even if blade interferes with tine during processing, damage is minimal
  ·Materials: S45C (Unhardened steel)

  • Volume Discount

  Standard Price:	SGD 85.06-
  Days to Ship:	4 Day(s) or more

• 

  Firm Shaving Chuck (Points Only)【3 Pieces Per Package】

  NEW STRONG

  [Features]
  ·It can be used with Gan Chuck Bohzu (jig base) to expand the range of machining.
  ·A set of 4.
  [Applications]
  To grasp irregularly shaped objects.

  Standard Price:	SGD 301.34-
  Days to Ship:	7 Day(s) or more

• 

  Four-claws scroll chuck (Split claw type)

  KOBAYASHI IRON WORKS

  [Features]
  · Ideal for grasping objects from round bars to square workpieces.
  · Rectangular workpieces can also be grasped by molding the soft jaws.

  Standard Price:	SGD 1,499.57-
  Days to Ship:	10 Day(s)

• 

  HO1MA Soft Jaw (for HOWA)

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  Standard Price:	SGD 58.44-
  Days to Ship:	8 Day(s)

• 

  Soft Jaw (for Soul)

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  Standard Price:	SGD 92.91-
  Days to Ship:	8 Day(s)

• 

  Soft Jaw (for Nikko)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  Standard Price:	SGD 65.66-
  Days to Ship:	8 Day(s)

• 

  Soft Jaw (for Victor)

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  Standard Price:	SGD 107.19-
  Days to Ship:	8 Day(s)

• 

  Soft Jaw (for Matsumoto)

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  Standard Price:	SGD 70.94-
  Days to Ship:	8 Day(s)

• 

  Rolling Center NC70

  FUTAMURA MACHINES & TOOLS

  [Features]
  · The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).
  · Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)
  · By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.
  · The use of a unique labyrinth mechanism (non-contact) as a measure to prevent immersion when cutting oil is used eliminates wear, friction, and power loss, reduces the temperature rise of the machine, and improves accuracy and reliability of lifespan.

  Standard Price:	SGD 1,232.53-
  Days to Ship:	9 Day(s) or more

• 

  Rolling Center 100

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
  · 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
  · As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.

  Standard Price:	SGD 383.49-
  Days to Ship:	6 Day(s) or more

• 

  Rolling Center 100 With Stickers

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
  · 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
  · As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
  · V seal is adopted and suitable when cutting oil is used.

  Standard Price:	SGD 406.31-
  Days to Ship:	6 Day(s) or more

• 

  Rolling Center HB

  FUTAMURA MACHINES & TOOLS

  Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type

  Standard Price:	SGD 1,249.88-
  Days to Ship:	9 Day(s) or more

• 

  Work Driving Center HD

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Center runout (maximum) against M.T. is TIR 0.01.
  · Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
  · The claw and the center shaft are made of high-speed steel to achieve high durability.

  Standard Price:	SGD 1,483.60-
  Days to Ship:	6 Day(s) or more

• 

  Work Driving Center, HD-Type Replacing Claw

  FUTAMURA MACHINES & TOOLS

  When the claw of the work driving center is worn and damaged, promptly replace the claw before using.

  Standard Price:	SGD 317.28-
  Days to Ship:	9 Day(s) or more

• 

  Umbrella Type Rotation Center BRC

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Used for lathes and cylindrical grinding machines.
  · Used for center pushing tool of pipe type, ring type and thin processed items.
  · Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.

  Standard Price:	SGD 524.96-
  Days to Ship:	6 Day(s) or more

• 

  Carbide Lathe Center TC Series

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	SGD 59.77-
  Days to Ship:	4 Day(s) or more

• 

  Carbide Long Center

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	SGD 386.85
  Days to Ship:	8 Day(s) or more

• 

  Die Holder for Lathes (SET)

  TAKURA KOGU

  [Specifications]
  ·Takura Kogu Seisakusyo, lathe jig, lathe die holder (SET)

  Standard Price:	SGD 567.75-
  Days to Ship:	6 Day(s) or more

• 

  Lathe Center

  TRUSCO NAKAYAMA

  [Features]
  · It is all pure steel.
  [Applications]
  · Prevents runout of workpiece.

  Standard Price:	SGD 40.12-
  Days to Ship:	4 Day(s) or more

• 

  Lathe Center (Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  ·It has a carbide tip.
  ·Prevents workpiece vibration.
  ·Materials: Carbon steel for machine structure (S45C)

  Standard Price:	SGD 72.90-
  Days to Ship:	4 Day(s) or more

• 

  Lathe Center (Long Type, with Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  · By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
  [Applications]
  · Prevents runout of workpiece.

  Standard Price:	SGD 309.55-
  Days to Ship:	4 Day(s) or more

• 

  "Half Center" (with Carbide Tip)

  TRUSCO NAKAYAMA

  [Features]
  · The tip of the lathe center has been cut so as not to touch the workpiece.
  [Applications]
  · Prevents center deflection.

  Standard Price:	SGD 371.35-
  Days to Ship:	4 Day(s) or more

• 

  Umbrella-shaped rotating center (with bearings/TLK)

  TRUSCO NAKAYAMA

  [Features]
  · With bearing.
  [Applications]
  · As a tool for centering holes at the pipe center.

  Standard Price:	SGD 297.14-
  Days to Ship:	4 Day(s) or more

• 

  Tork-Loc Collet, Short

  TEIKOKU CHUCK

  This collet is compatible with the short series of draw bar models and between-center models.
  · Has an accurate plane pair.
  · Even if the positions of the arbor and collet change, it will not be affected.
  · Additional polishing is possible when deviating from the holding range.

  Standard Price:	SGD 598.53-
  Days to Ship:	7 Day(s) or more

• 

  BP Type Back Plate For Scroll Chucks

  KOBAYASHI IRON WORKS

  [Features]
  · Chuck plate for a lathe
  · For JIS and ASA-A1/A2 spindle ends
  · Required to mount an ordinary-type chuck to a lathe.

  Standard Price:	SGD 572.71-
  Days to Ship:	10 Day(s)

• 

  SA Type 3-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Direct Mounting Type

  KOBAYASHI IRON WORKS

  [Features]
  · 3-jaw scroll chuck
  · Integrated jaw type with internal jaw and external jaw
  · Direct mounting type (direct type)
  · Short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.
  · Suitable for high-speed, heavy cutting due to the durable box body structure and balance correction.

  Standard Price:	SGD 1,799.09-
  Days to Ship:	10 Day(s)

• 

  LI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Standard Type

  KOBAYASHI IRON WORKS

  [Features]
  · Standard-type 4-jaw single-acting chuck with the mount part the same as the JIS Standard.
  · Uses jaws and a screw rod made from special steel with a design that reduces backlash.
  · Ideal for gripping round workpieces and irregular-shaped workpieces.

  Standard Price:	SGD 945.60-
  Days to Ship:	10 Day(s)

• 

  MI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Direct Mounting Type

  KOBAYASHI IRON WORKS

  [Features]
  · 4-jaw single-acting short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.

  Standard Price:	SGD 1,559.75
  Days to Ship:	10 Day(s)

Loading...