(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Turning Inserts（work material：Stainless Steel Page2）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Replacement Blade Insert V (35° Diamond) VBGT-R-FX
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Standard Price: SGD 13.35- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 12.90- Days to Ship: 8 Day(s) or more -
Turning Insert Diamond, with Hole, 55°, Positive 7°, DCMT-PS "for Finishing to Intermediate Cutting"
TUNGALOY
[Specifications]
· Breaker Symbol: PS
· Shape: Diamond with Hole 55°
· Rake Angle: Positive 7°
[Applications]
· Finishing to Medium CuttingStandard Price: SGD 9.64- Days to Ship: 8 Day(s) -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 11.34- Days to Ship: 4 Day(s) or more -
Square 90°, Negative, with Hole SNMG0903○○ "Rough Cutting"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 8
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 7.00 Days to Ship: 6 Day(s) or more -
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 11.91 Days to Ship: 6 Day(s) or more -
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: SGD 11.91 Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 15.72- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: SGD 15.17- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 6.46- Days to Ship: 4 Day(s) or more -
DCGT-J, 55° rhombus, positive, with hole, turning tip
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 13.55- Days to Ship: 4 Day(s) or more -
60° Triangle Positive with Hole TBGT "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: SGD 12.45- Days to Ship: 4 Day(s) or more -
60° Triangle Positive with Hole TCMT ○○HQ "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: SGD 5.91 Days to Ship: 7 Day(s) or more -
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: SGD 11.68- Days to Ship: 4 Day(s) or more -
60° Triangle Positive with Hole TPET "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: SGD 11.91- Days to Ship: 4 Day(s) or more -
Diamond Shape 35° / Positive With Hole VBET
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: SGD 14.63- Days to Ship: 4 Day(s) or more -
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: Left-handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: SGD 13.00- Days to Ship: 4 Day(s) or more -
CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For NPT 60° threads
Machining pitch: for 18 threadsStandard Price: SGD 39.90- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 40.50- Days to Ship: 10 Day(s) -
ISO Trapezoid 30° Thread Crest, With Chamfering Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For trapezoidal 30° threads
Machining pitch: for 8 mmStandard Price: SGD 49.90- Days to Ship: 8 Day(s) or more -
T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)
SANDVIK
[Features]
Carbide-coated insert
Hexagonal-shaped 80° insert
Negative insert
For machining general steel and stainless steel
For semi-finishingStandard Price: SGD 15.87- Days to Ship: 4 Day(s) or more -
SANDVIK
[Features]
T-Max S, carbide-coated insert for general machining
Precision class
Square-shaped insert
Positive insert
For general steel machining
Without breakerStandard Price: SGD 10.27- Days to Ship: 8 Day(s) or more -
CoroCut 3 For Grooving/Profiling
SANDVIK
[Features]
CoroCut 3 insert
3-cutting-edge specification
Carbide-coated insert
For shallow grooving
For profiling
Full R
Groove width: 1.5 mmStandard Price: SGD 59.20- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 36.50- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 27.06 Days to Ship: 4 Day(s) or more -
OSG
[Features]
· 4 tools in one.
Flattening the bases of holes.
High-efficiency machining of internal diameters.Standard Price: SGD 22.90- Days to Ship: 7 Day(s) or more -
Negative Type Wiper Tip TNMX (WF Breaker)
KYOCERA
[Features]
· New design wiper cutting blade shape achieves high efficiency machining
· WF breaker (improved machining efficiency)
· Supports high feed rates to reduce machining time
· Achieves high efficiency machining
· Excellent scrap processing performance over a wide range of machining tasksStandard Price: SGD 7.81- Days to Ship: 6 Day(s) or more -
Standard Price: SGD 37.31- Days to Ship: 6 Day(s) or more -
Standard Price: SGD 37.50- Days to Ship: 7 Day(s) or more -
W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Standard Price: SGD 13.48 Days to Ship: 4 Day(s) or more -
V Type Rhombus 35° / Negative with Hole / VNMG160408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Standard Price: SGD 19.59 Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip T (Triangle) TEGN
SUMITOMO ELECTRIC HARDMETAL
[Specifications]
·Chip Breaker Symbol: None
· Shape: T (Triangle)
· Groove
·Holes: N (No hole)
·Relief angle: Positive 20° (E) [Grade Features]
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: SGD 12.80 Days to Ship: 4 Day(s) or more -
Indexable Tip T (Triangle) TNMA
SUMITOMO ELECTRIC HARDMETAL
[Specifications]
·Chip Breaker Symbol: None
· Shape: T (Triangle)
· Groove
·Holes: A (With holes)
·Relief angle: Negative 0° (N) [Grade Features]
·AC410K is a general-purpose grade with an excellent balance of wear resistance and abrasion resistance.
·AC700G is a grade focusing on abrasion resistance that can be used for high to medium-speed cutting.
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.Standard Price: SGD 8.19- Days to Ship: 4 Day(s) or more -
Tip (SEC - Thread Cutting Tool STH Type)
SUMITOMO ELECTRIC HARDMETAL
Lineups include various cutting edge replaceable tool inserts.
Standard Price: SGD 35.67 Days to Ship: 4 Day(s) or more -
Tip (SEC - Thread Cutting Tool STH Type)
SUMITOMO ELECTRIC HARDMETAL
Lineups include various cutting edge replaceable tool inserts.
Standard Price: SGD 35.67 Days to Ship: 4 Day(s) or more -
Standard Price: SGD 16.49- Days to Ship: 4 Day(s) or more -
Chip (for Blank Groove Insertion Chip TGA Type) TGAL-T
SUMITOMO ELECTRIC HARDMETAL
Insert for cutting tools.
Standard Price: SGD 14.37- Days to Ship: 4 Day(s) or more -
Replacement Blade Insert C (80° Diamond) CCGT-N-SC
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Standard Price: SGD 10.51- Days to Ship: 4 Day(s) or more -
Replacement Blade Insert C (80° Diamond) CCGT-T-N-SC
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Standard Price: SGD 13.87- Days to Ship: 4 Day(s) or more -
Replacement Blade Insert D (55° Diamond) DCGT-L-FY
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Standard Price: SGD 12.42- Days to Ship: 4 Day(s) or more -
Replacement Blade Insert D (55° Diamond) DCGT-T-MN-SI
SUMITOMO ELECTRIC HARDMETAL
A diamond-shaped insert.
Standard Price: SGD 16.67- Days to Ship: 4 Day(s) or more -
55° Diamond-Shape With Hole, 55°, Positive 7°, DCMT-SU, For Light To Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· General-purpose breaker with excellent sharpness.Standard Price: SGD 8.57- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 9.39- Days to Ship: 4 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMG-HM, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Wide-width, low-resistance, M-class breaker with right/left-handedness, for medium to rough cutting.Standard Price: SGD 11.14 Days to Ship: 4 Day(s) or more -
Standard Price: SGD 14.56- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | TUNGALOY | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | OSG | KYOCERA | NGK SPARK PLUG | NGK SPARK PLUG | MISUMI | MISUMI | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | Turning Insert Diamond, with Hole, 55°, Positive 7°, DCMT-PS "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade | Outer Diameter Grooving Chip GBA43 with 3D Breaker (GM Breaker) | W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting" | V Type Rhombus 35° / Negative with Hole / VNMG160408-MTM20 "Intermediate Cutting" | 55° Diamond-Shape With Hole, 55°, Positive 7°, DCMT-SU, For Light To Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-HM, For Medium To Rough Cutting | ||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shape | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | W (Hexagonal Type) | T (Triangle) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) / T (Triangle) | T (Triangle) | Other | Other | Other | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | W (Hexagonal Type) | V (35° Diamond-Shaped) | T (Triangle) | T (Triangle) | Other | Other | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) |
| work material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Threading | Threading | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | - | - | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Outer Diameter/Inner Diameter | Threading | Threading | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | - | 2 | 2 | 4 | 8 | 4 | 4 | 4 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 2 | 3 | 3 | 3 | 3 | 4 / 6 | 3 / 4 | 3 | 1 | - | - | - | - | - | 6 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | Finish | Finish / Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium to deep grinding | Medium grinding | Finish | Medium grinding | Medium grinding | Finish | Medium grinding | Finish | Finish | Finish | Finish | Finish | Finish | - | Finish / Medium grinding | - | - | - | - | - | Finish | - | - | Medium grinding | Medium grinding | - | - | - | - | - | - | - | - | Finish | - | - | Finish | - | - |
| Rake angle | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | - | Negative | - | - | - | - | - | Negative | - | - | Negative | Negative | Pozidriv | Negative | - | - | - | - | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Pozidriv |
| Nose R | 0.2 ～ Other | 0.2 ～ Other | - | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | - | - | - | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.4 ～ Other | 0.2 | 0.4 ～ Other | - | 0.4 ～ 1.2 | Other | Other | 0.8 | 0.8 | 0.8 | 0.4 ～ 0.8 | Other | Other | 0.2 ～ Other | - | Other | Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ 1.2 | 0.4 ～ 0.8 | 0.2 ～ Other |
| Selfishly | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | - | - | Left-hand | Right-hand | Left-hand | Left-hand | No-hand | No-hand | Left-hand | No-hand | No-hand | No-hand | Right-hand | - |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 mm ～ 3.00 mm | - | 2.5 ～ 4 | 0.2 mm ～ 0.8 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.50 mm ～ 2.00 mm | 1.50 mm ～ 3.00 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.20～0.75 ～ 1.00～1.50 | 0.20～0.75 ～ 1.00～1.50 | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Outer Diameter / Internal Diameter | Outer Diameter | Outer Diameter / Internal Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Trapezoid 30° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8TPI ～ 27TPI | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 48～16 | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- SUMITOMO ELECTRIC HARDMETAL (432)
- KYOCERA (234)
- SANDVIK (95)
- NGK SPARK PLUG (69)
- TUNGALOY (23)
- SANWA SEISAKUSYO (4)
- BIG DAISHOWA SEIKI (3)
- OSG (3)
- WIDIA (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?