Square Connectors（Connection direction：Straight）

• • On Sale Till 31/03/2025

  

  57 Series Soldering/DIP-Type Connector

  DDK

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  Standard Price:	SGD 5.72-
  	Special Price
  Days to Ship:	Same day or more

• 

  17JE Series Soldering Type Connector

  DDK

  17 Series (Dsub type) soldering connection type square connector for cable equipment.
  [Features]
  · Square connector for solder wire connections, with solder cup type contact.
  · Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
  · The hood is metalized plastic, which provides weight reduction and a high shielding effect.
  · Either the pin connector or the socket connector can be selected.
  · There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
  · The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
  [Applications]
  · Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 3.39-
  Days to Ship:	Same day or more

• 

  [Enclosure]C Type IP66, Rotary Lever Series

  ILME

  Ilme's traditional lever C type
  It is a standard enclosure of Ilme connector.
  A uniquely developed rotary lever enables smooth attachment and detachment.
  Stainless steel levers and springs ensure safe and secure fitting and airtightness.
  The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
  Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

  Standard Price:	SGD 22.10-
  Days to Ship:	7 Day(s) or more

• 

  PCR Series

  HONDA TSUSHIN KOGYO

  1.27 mm pitch high density rectangular connector.
  [Features]
  ·Robust and ideal for interfaces due to the metal shell and metal case.
  ·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
  ·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
  ·For FCC and other EMI countermeasures.
  ·Live line connection (3 steps) is also available.
  ·Ideal for horizontal, parallel and vertical connections.
  ·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
  [Applications]
  ·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

  Standard Price:	SGD 4.36-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  D-Sub Connectors - XM2/XM3

  OMRON

  These D-sub connectors are ideal for use with OA equipment interfaces.
  [Features]
  · Shielded connector for use in EMI countermeasures.
  · The metalized plastic hood (Model XM2S) provides excellent noise protection.
  · Multi-hole ferrite core equipped types (Model XM3B-F) are also available.
  · Offers a space-saving design and superior noise protection at high frequencies.
  · A wide variety of mounting brackets and grounding fixtures are available.
  · Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.)
  [Applications]
  · Small and tough-wearing structure with a metal shell

  Standard Price:	SGD 6.40-
  	Special Price
  Days to Ship:	Same day or more

• 

  IL-AG7 Series

  JAPANAVIATION

  This pin connector has flanges to screw in to the board.
  
  [Features]
  ・This pin connector has flanges on both sides of the insulator to screw in to the board.
  ・By screwing in using the flanges, it can be fixed more firmly to the board.
  ・The straight type is molded to alleviate stress on the soldered parts, which prevents cracking of solder due to changes in temperature.
  ・This prevents differences in expansion coefficient between the board and insulator due to rapid temperature changes, and solder cracking caused by vibration.
  ・The conformation of the fitting element and color are different from the standard type (standard: green, mismatch prevention: light blue), so the product is ideal for use when two connectors are used next to each other with the same number of poles.

  Standard Price:	SGD 2.68-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  EMI Countermeasure Solder/Machine Contact D-Sub Connector

  MISUMI

  Has a machine contact for plug-in and removal durability, and bead processing ensures a firm contact with the partner

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • EMI Countermeasure
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 6.07-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  HIF3B Series MIL Standard-Compliant Ribbon Cable Connector

  HIROSE ELECTRIC

  MIL standard-compliant rectangular ribbon cable connector.
  [Features]
  · HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.
  · Compatible with HIF3 series.
  · HIF3B series products are UL-listed connectors.
  · Features a mechanism to prevent mis-insertion.
  · A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)
  · A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.
  · A system that embeds the polarizing key in the socket hole and guides it.
  · A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.
  · The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).
  [Applications]
  · A wide variety of models are available, enabling use with a wide range of equipment.

  Standard Price:	SGD 1.87-
  	Special Price
  Days to Ship:	Same day or more

• 

  Solder/Press Contact (Low Cost) D-Sub Connector

  MISUMI

  D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 2.34-
  Days to Ship:	Same day or more

• 

  PCR Half Pitch Solder Female Connector

  MISUMI

  Half-pitch Model PCR Solder Model Connector

  • Volume Discount

  • For Signal
  • PLC
  • EMI Countermeasure
  • Solder
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 10.92-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  2.00-mm Pitch Serial I/O Connector

  MOLEX

  A Molex 2.0 mm pitch connector for external relay connection.

  Standard Price:	SGD 12.23-
  	Special Price
  Days to Ship:	Same day or more

• 

  MR Series

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Standard Price:	SGD 2.60-
  Days to Ship:	Same day or more

• 

  IEEE1284, Half-Pitch Connector, EMI-Countermeasure Solder Male Connector

  MISUMI

  High-speed Transfer Supporting Solder Model Half-pitch I/O Connector

  • Volume Discount

  • For Signal
  • PLC
  • Motor
  • EMI Countermeasure
  • SCSI
  • Solder
  • Gold Plated
  • Screw Lock
  • One-Touch Lock

  CAD ：

  2D

  Standard Price:	SGD 10.99-
  Days to Ship:	Same day or more

• 

  D-sub Connector, Crimped Housing

  MISUMI

  Crimp connection model that makes consistent workmanship quality possible

  • Caulking

  CAD ：

  2D

  Standard Price:	SGD 3.61-
  Days to Ship:	4 Day(s) or more

• 

  PCR Half Pitch Female Press-fit Connector

  MISUMI

  Half-pitch model PCR Pressure Welding Model Connector

  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 11.51-
  Days to Ship:	4 Day(s) or more

• 

  3M^TM Mini-Camera Link Standard-Compliant PCB Mount Connector Receptacle

  3M

  [Features]
  · A board mounting connector receptacle—compatible with the Mini-Camera Link standard.

  Standard Price:	SGD 9.88-
  Days to Ship:	3 Day(s) or more

• 

  Centronics Solder Spring-lock Connector (Male)

  MISUMI

  [Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

  • Volume Discount

  • For Signal
  • Connection between Boards
  • Printer
  • Solder

  CAD ：

  2D

  Standard Price:	SGD 6.08-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  D-Sub Connector (Solder Termination Type), HD Series

  HIROSE ELECTRIC

  A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
  
  [Features]
  · Small and lightweight connector due to metal shell.
  · The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
  · The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
  · CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

  Standard Price:	SGD 4.77-
  	Special Price
  Days to Ship:	Same day or more

• 

  Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

  MISUMI

  [Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 16.12-
  Days to Ship:	4 Day(s) or more

• 

  Centronics Solder Spring-lock Connector (Panel Mountable Female)

  MISUMI

  [Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

  • Volume Discount

  • For Signal
  • Connection between Boards
  • Printer

  CAD ：

  2D

  Standard Price:	SGD 4.91-
  Days to Ship:	Same day or more

• 

  3M^TM Miniature Delta Ribbon (MDR) System Receptacles

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.
  ▪ EMI/ESD countermeasure items.
  · Tough structure based on a die-cast lock stand.
  • M2.5 is also available for fixed screw sizes corresponding to ISO standards.
  · Products equipped with a ground lock are available to streamline the pre-soldering of temporary mountings and ground processing.

  Standard Price:	SGD 6.58-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  Centronics Solder Spring-lock Connector (Female)

  MISUMI

  [Features]A Centronics connector for relay with a lineup of low-priced products. This connector is used for wire-to-wire connection with a male connector by attaching cable with solder.

  • Volume Discount

  • For Signal
  • Connection between Boards
  • Printer
  • Solder

  CAD ：

  2D

  Standard Price:	SGD 7.97-
  	Special Price
  Days to Ship:	Same day or more

• 

  CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

  ILME

  CK / CKS Small screw type / spring type, 10A / 250 V, Insert
  
  [Features]
  ・CK/CKS.
  ・Small screw type / spring type.
  ▪ 10A/250 V insert

  Standard Price:	SGD 6.78-
  Days to Ship:	3 Day(s) or more

• 

  MR Male Connector

  MISUMI

  High-density MR Male Connector

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • Solder
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 3.19-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  MR Series Case

  HONDA TSUSHIN KOGYO

  Case for the MR series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Standard Price:	SGD 4.21-
  	Special Price
  Days to Ship:	Same day or more

• 

  D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

  HIROSE ELECTRIC

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  Standard Price:	SGD 8.11-
  Days to Ship:	4 Day(s) or more

• 

  CD Type, Crimp Type Connector, CD Series

  HIROSE ELECTRIC

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 4.05-
  Days to Ship:	3 Day(s) or more

• 

  Mini Delta Ribbon (MDR) System Wiremount Solder Plug

  3M

  [Features]
  · The MDR system consists of “industry standard product” half pitch I/O connectors.
  · Use of pre-loaded cantilever contacts ensures high reliability, requires little insertion and withdrawal strength and prevents twisting.
  · Accommodates a wide range of cable sizes from AWG#24 to AWG#30.
  · Solder wiring method that does not require special jigs or tools.
  · Solder heat resistance of 360°C for 10 seconds comparable to conventional connectors.
  · Unique contact shape that takes soldering workability into consideration.
  [Applications]
  · For cable connections between equipment.
  · Accommodates a wide range of cable sizes and ideal for solder wiring without special jigs or tools.

  Standard Price:	SGD 8.52-
  Days to Ship:	Same day or more

• 

  FCN connector Solder type female connector

  MISUMI

  Mitsubishi Electric / Omron / Fuji Electric PLC Connector

  • Volume Discount

  • Solder
  • Gold Plated
  • Screw Lock

  Standard Price:	SGD 8.56
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  PCR Series Case

  HONDA TSUSHIN KOGYO

  This is a PCR series case.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  Standard Price:	SGD 4.36-
  	Special Price
  Days to Ship:	Same day or more

• 

  High Withstand-Voltage (3,000 V) Board-To-Cable Connector With Lock, MDF51 Series

  HIROSE ELECTRIC

  This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
  
  [Features]
  • Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
  • This also prevents accidents resulting from partial mating.
  • Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
  • Also, the mating surface has a large guiding area to make insert operations easier to perform.
  • Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
  • Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
  • Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
  • UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).

  Standard Price:	SGD 1.17
  Days to Ship:	3 Day(s) or more

• 

  D-Sub, D02, D02-M15 Series

  JAPANAVIATION

  A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
  
  [Features]
  ・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
  ・Interchangeable with different connector types and commonly used accessories.
  ・The shell joint shape has polarity, fully preventing accidental reverse insertion.
  ・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
  ・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
  ・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

  • Volume Discount

  Standard Price:	SGD 2.46-
  Days to Ship:	Same day or more

• 

  MIXO Modular Insert & Contact

  ILME

  [Features]
  · MIXO.
  · MIXO modular inserts and contacts.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
  · Supports optical fiber, coaxial, and Dsub9Pin connectors.

  Standard Price:	SGD 4.10-
  Days to Ship:	3 Day(s) or more

• 

  Solder/Machine Contact (Low Cost) D-Sub Connector

  MISUMI

  D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 4.39-
  Days to Ship:	Same day or more

• 

  Solder/Press-fit (High-density) D-Sub Connector

  MISUMI

  High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 4.12-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  MIL Press-fit Female Connector (Without Lock)

  MISUMI

  MIL connector female pressure welding connector (without lock). HIF3 series connector widely used in Japan

  • Volume Discount

  • UL
  • MIL
  • For Signal
  • Connection between Boards
  • Solenoid Valve
  • PLC
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 2.55-
  	Special Price
  Days to Ship:	Same day or more

• 

  MIL connector IDC female connector (no lock)

  MISUMI

  [Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

  • Volume Discount

  • UL
  • MIL
  • For Signal
  • Connection between Boards
  • Solenoid Valve
  • PLC
  • Pressure Welding
  • Gold Plated

  Standard Price:	SGD 3.12-
  Days to Ship:	3 Day(s) or more

• 

  Centronics Press-fit Spring-lock Connector (Male)

  MISUMI

  Labor-saving Pressure Welding Spring-lock Male Connector

  • Volume Discount

  • For Signal
  • Connection in Boards
  • Printer
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 11.48-
  Days to Ship:	Same day or more

• 

  Centronics Press-fit Spring-lock Connector (Female)

  MISUMI

  Labor-saving Pressure Welding Spring-lock Male Connector

  • Volume Discount

  • For Signal
  • Connection in Boards
  • Printer
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 11.95-
  Days to Ship:	Same day or more

• 

  MR Female Connector

  MISUMI

  High-density MR female Connector

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • Solder
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 3.52-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  PCS Series

  HONDA TSUSHIN KOGYO

  Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors
  
  [Features]
  · Board to cable types available in 20 to 96 cores.
  • Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
  · Soldered types also available.
  ▪ For EMI measures other than FCC.
  • Built with a durable structure for use as an interface.
  · Quick lock using a metal lock spring.
  · Those for panel relays are also available.
  · Accessories for preventing incorrect insertion are also available.
  · A wide range of core numbers, from 34 to 150, are also available for board to board.
  • Specifically designed for smooth insertion and extraction, even when using multiple cores.
  • Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

  Standard Price:	SGD 5.47-
  	Special Price
  Days to Ship:	Same day or more

• 

  MRP Series Housings

  HONDA TSUSHIN KOGYO

  Housing for the MRP series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Standard Price:	SGD 2.60-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)【1-500 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  Standard Price:	SGD 0.28-
  	Special Price
  Days to Ship:	3 Day(s) or more

• 

  DeviceNet Compliant Connector, HR31 Series

  HIROSE ELECTRIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  Standard Price:	SGD 3.92-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  SUMICON 1600 Series Multi-Contact Rectangular Connector

  HIROSE ELECTRIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  Standard Price:	SGD 1.88-
  	Special Price
  Days to Ship:	Same day or more

Loading...