Extension Boards（Type：Digital Input/Output）

• 

  Digital I/O

  CONTEC

  [Features]
  · An interface board (card) for extending the function of inputting or outputting a digital signal to a computer.
  · Reads the status (ON/OFF) of relays, operation switches, measuring devices, etc., while controlling (ON/OFF) lamps, 7-segment displays and relays, etc.
  · Can also be used as an interface for digital communication with microcomputers and various controllers, such as PLCs.

  Standard Price:	SGD 356.03-
  Days to Ship:	4 Day(s) or more

• 

  DIO16/16 point insulation

  INTERFACE

  DIO16/16 point insulated input type
  
  [Features]
  · 3.3V signal environment CPZ series CompactPCI digital input / output interface module with 16 point photo coupler input (supporting sink type output) and 16 point high current open collector output (sink type). Input and output part is insulated by a photo coupler in this module. Since it has a timer counter, it can be used as an interval timer.
  In addition, this product has an input/output control circuit. With this control signal, data can be input/output in synchronization with an external circuit. The input part can also be used as latch input or normal input (through input) by software setting. It also supports reset signal output and external reset signal input from the connector.
  

  Standard Price:	SGD 319.80-
  Days to Ship:	7 Day(s) or more

• 

  DIO32/32 point insulation

  INTERFACE

  DIO32/32 point insulated input type
  
  [Features]
  · 3.3V signal environment CPZ series CompactPCI digital input/output interface module with 32 point photo coupler input (supporting sink type output) and 32 point high current open collector output (sink type). This module requires an external power supply because it has an insulation power supply built-in.
  Data can be output in synchronization with the external circuit with an input handshake circuit.
  Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 525.09-
  Days to Ship:	4 Day(s) or more

• 

  USB-Compatible N Series Insulation-Type Digital I/O Unit

  CONTEC

  With compact design, installation on floor and walls and installation on DIN rail mounting brackets is in the panel or in the unit where there is not much flexibility with the installation location.
  
  [Features]
  · Has 8 points of photo coupler isolated input (corresponding to current sink output/current source output) with response speed of 200 μsec. 12-24VDC current sink/source output supported. Input is a common configuration of 8 points.
  · Has independent common relay output (c contact) 8 points.
  · Because it is an independent common, it can support different external power supplies for one point (one common) unit.
  · The output rating is designed to have a maximum capacity of 6A240VAC, 5A28VDC maximum per point.
  · Because the USB (computer) and the input / output interface are isolated by photo coupler and relay, it is excellent for noise reduction.
  · You can not choose an installation place with a 188.0 (W) × 78.0 (D) × 30.5 (H) concept design.
  · Wiring is easy with a terminal connector (screw type).
  · USB1. 1/USB USB2 standard, high speed transfer at HighSpeed (480Mbps) is possible
  · It can be installed on the floor/wall/ceiling etc. with screw fastening, magnets, rubber feet etc. Moreover, since the DIN rail attachment mechanism comes as standard on the main body, it can be easily installed in the panel or in the device.
  · By using the digital input/output driver API-DIO (WDM), you can create Windows applications. We also provide diagnostic programs that can check the hardware's operation.
  · You can create LabVIEW applications by using the special library VI-DAQ.
  · In addition to components that can easily control digital input/output devices, it is a measurement system development support tool complete with a software collection (various graphs, switches, lamps etc) specialized for measurement applications. Further, since a practical example collection (application program) such as a digital monitor which can confirm the input/output display of data is available, computer measurements can be started immediately without the program.

  Standard Price:	SGD 781.11-
  Days to Ship:	4 Day(s) or more

• 

  USB I/O Unit, Insulated Digital Input/Output, 16 ch

  CONTEC

  This product is a USB 2.0 compatible digital input/output unit that expands the digital signal input/output function from the USB port of a personal computer.
  [Features]
  ·Equipped with opto-isolator insulated input (compatible with current sink output / current source output), opto-isolator insulated open collector output (current sink type)
  ·Bus insulation with opto-isolator
  ·Up to 8 input signals can be used as interrupt request signals
  ·Equipped with a digital filter function to prevent false recognition of input signals due to noise and chattering
  ·Built-in surge voltage protection Zener diode and overcurrent protection circuit in output circuit
  ·Can operate with USB bus power / 12 to 24VDC power supply
  ·Compact design that can be installed anywhere (188.0 (W) × 78.0 (D) × 30.5 (H))
  ·USB 1.1 / USB 2.0 standard compliant
  ·Various installations such as screw mount, magnets (sold separately), DIN rails, are possible
  ·Uses a terminal connector for easy wiring

  Standard Price:	SGD 640.74
  Days to Ship:	7 Day(s) or more

• 

  20MSPS DO32 point TTL (DMA transfer)

  INTERFACE

  20MSPS DO32 point TTL (DMA transfer)
  
  [Features]
  · A digital output product with TTL level 32 point digital signal compliant with a PCI bus. Unlike ordinary digital output products that output data by I/O command, PCI-2472C is a bus master and supports DMA transfer that automatically outputs data stored in the memory space of the specified computer to the outside it is a product. For this reason, high-speed (up to 20MHz) data output (pattern output) can be performed without imposing a load on the CPU, and high I/O performance is provided in various computer environments. Since it has a timer counter, it can be used as an interval timer.
  

  Standard Price:	SGD 539.62
  Days to Ship:	7 Day(s) or more

• 

  DIO32/32 point CMOS 5V-48V/100mA

  INTERFACE

  DIO32/32 point CMOS 5V-48V/100mA
  
  [Features]
  · 32 point CMOS high voltage resistance input.
  · Input voltage: DC+5V to DC48V (maximum DC+50V).
  · Input response time: 0.5μs.
  · 32 point high current open collector output (sink type).
  · Output voltage: DC+5V to DC48V (maximum DC+50V).
  · Output response time: 1.0μs.
  · Non-isolated high speed input/output.
  · Input/output handshake function installed.
  · External interrupt input possible.
  · External reset input, with output function.
  · With interval timer.

  Standard Price:	SGD 483.16
  Days to Ship:	7 Day(s) or more

• 

  DIO32 point TTL

  INTERFACE

  DIO32 point TTL
  
  [Features]
  · A CompactPCI digital input/output interface module
  with 32 point TTL schmitt trigger input and 32 point TTL open collector (with pull up resistor). Input/output common terminal. Data can be output in synchronization with the external circuit with an input handshake circuit. It is possible to acquire latch at all points simultaneously with an external signal. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 322.69-
  Days to Ship:	7 Day(s) or more

• 

  DIO64 point

  INTERFACE

  [Features]
  · A 3.3V signal environment CPZ series CompactPCI I digital input/output interface module with 64 point TTL schmitt trigger input and 64 TTL open collector (with pull up resistor). Input/output common terminal. Data can be output in synchronization with the external circuit with an input handshake circuit. It is possible to acquire latch at all points simultaneously with an external signal. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 888.09
  Days to Ship:	7 Day(s) or more

• 

  DIO8/8 point insulation

  INTERFACE

  DIO8/8 point insulated input
  
  [Features]
  · a digital input/output product with 8 point digital signal input of sink type current drive photo coupler input compliant with PCI bus and
  8 digital signal output of high current open collector sink type output. The input section of this product is insulated from the PCI bus by a photo coupler. Since it has a timer counter, it can be used as an interval timer. Also supports reset signal input from the connector.

  Standard Price:	SGD 290.87-
  Days to Ship:	7 Day(s) or more

• 

  DO32 point insulation

  INTERFACE

  DO32 point isolated type.
  
  [Features]
  · A Low Profile PCI digital output product with 32 point high-current open collector output (sink type). Output section is insulated by photo coupler. Further, it requires an external power supply because it has an insulation power supply built-in. A wide input range type. Compatible with DC+5V to DC+24V (maximum rated voltage DC+30V). Data can be output in synchronization with the external circuit with an output handshake circuit. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 435.49
  Days to Ship:	7 Day(s) or more

• 

  DO64 point

  INTERFACE

  [Features]
  · 3.3V signal environment with 64 points high current open collector output (sink type) CPZ series CompactPCI digital output interface module. Since this module has built-in insulation power supply, it is not necessary to supply external power to this module. (The power supply of the external load circuit is necessary.) The output is a wide range type compatible with DC+5V to DC+50V. Data can be output in synchronization with the external circuit with an output handshake circuit. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 554.02
  Days to Ship:	7 Day(s) or more

• 

  PPI48 point TTL

  INTERFACE

  PPI48 input TTL
  
  [Features]
  · A CompactPCI PPI (Programmable Peripheral Interface) module with 48 TTL schmitt input and 48 TTL level output.
  Input/output common terminal. This module can use all 8255 modes. Supports reset signal output and external reset signal input. In addition, it has an interval timer.
  

  Standard Price:	SGD 425.31
  Days to Ship:	7 Day(s) or more

• 

  16 point insulated input/16 point insulated output

  ADLINK

  [Features]·Same isolation as PLC, ideal for field work ·16-channel isolated digital inputs and 16 isolated digital outputs ·x1-lane PCI Express interface ·2,500 Vrms, opto-isolated ·Sink current up to 500 mA per isolated output ·2 external interrupt sources

  Standard Price:	SGD 419.40
  Days to Ship:	4 Day(s) or more

• 

  32-Point Insulated Input Digital Card

  ADLINK

  [Features]·2,500 V opto-isolated protection ·Wide input range makes it easy to sense the status of external devices ·Non-polar characteristics compatible with various industrial applications

  Standard Price:	SGD 404.73
  Days to Ship:	7 Day(s) or more

• 

  Eight insulated inputs/eight relay outputs

  ADLINK

  [Features]·Insulated, low-cost model ·Supports 32-bit 5 V PCI bus ·8-channel relay output with PCI-7250 ·8-channel isolated DI ·Onboard LED indicator for relay status ·Onboard relay drive circuit

  Standard Price:	SGD 367.01
  Days to Ship:	4 Day(s) or more

• 

  Digital Input/Output, PCI Board, 16 ch / 16 ch

  CONTEC

  This product is a PCI bus compliant interface board that inputs/outputs digital signals.

  Standard Price:	SGD 431.67
  Days to Ship:	7 Day(s) or more

Loading...