Installation Parts（Type：Bar）

• 

  Adjustable Fixed Bar for Lightweight Partitions, KGP Series

  MIRAI INDUSTRY

  [Features]
  - Simple installation with single-sided mounting.
  - Use to mount a box to a lightweight partition wall.
  - No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
  - Convenient for locations with narrow stud spacing (can be used even when cut down).
  - Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
  - The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
  - The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
  - The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.

  Standard Price:	SGD 3.76-
  Days to Ship:	4 Day(s) or more

• 

  Free Brace For Lightweight Partition Walls

  MIRAI INDUSTRY

  [Features]
  · Used for mounting boxes to lightweight partition walls.
  · No need to buy accessories for each type and size of wall studs. This product alone can be used for mounting the box. (Refer to the compatibility table below.)
  · Shaped so that it does not touch against the section which wraps around the opening side on the wall stud, even allowing the mounting of slide boxes with a depth of 36 mm to the opening side of 40‑mm wall studs.
  · Can be held temporarily with the double-sided tape provided, making mounting to wall studs easy.

  Standard Price:	SGD 5.40-
  Days to Ship:	7 Day(s) or more

• 

  Adjustment Fixing Bar For Lightweight Partitions (With Sliding Metal Fittings)

  MIRAI INDUSTRY

  [Features]
  · Used for mounting boxes to lightweight partition walls.
  · No need to buy accessories for each type and size of wall studs. This product alone can be used for mounting the box.
  · Includes slide metal fittings to make box positioning work or adjusting the position of the box after work has been carried out easy. (Temporarily fasten the box with clamps and then fix with 1 tapping screw.)
  *Slide metal fittings can also be ordered individually.
  · Mounts on one side, making it convenient for mounting boxes in locations where the wall stud space is tight, etc. (Can also be cut to use.)
  · Can be held temporarily with the double-sided tape provided, making mounting to wall studs easy.
  · With length-adjustment function. KGP-130EZ units can be connected together to extend. The KGP-188EZ bar can be shortened by breaking it off at the notches using a pair of combination pliers.

  Standard Price:	SGD 1.44-
  Days to Ship:	7 Day(s) or more

• 

  New Stat Bar (Anti-Tilt Bar)

  MIRAI INDUSTRY

  [Features]
  ・ You can also attach the connector to the knock on the back of the box.
  ・ The anti-tilt bar has ø4 mm and ø3 mm type that is easy to bend. (With knock, excluding adhesive type)
  ・ The adhesive type (with adhesive) is a type that melts the adhesive with a torch lamp and attaches it to the box.
  ・ Knock type (without W3/8 stat) can be installed even on a box with a heat insulating cover or a box with a heat insulating sheet attached. (Knock on the back cannot be used.)

  Standard Price:	SGD 4.45
  Days to Ship:	7 Day(s) or more

• 

  Stat Bar for Deck Plate

  MIRAI INDUSTRY

  [Features]
  ・ It is used for mounting and fixing the box to the deck plate.
  ・ The bar is a 6 mm steel wire that can be bent freely, so the height of the box can be adjusted freely.
  ・ You can prevent the box from tilting and fix it by using the wall reinforcement.
  ・ A connector can also be attached to the knock on the back of the box.

  Standard Price:	SGD 6.54
  Days to Ship:	7 Day(s) or more

• 

  4-mm Bar (Tilt Prevention Bar)

  MIRAI INDUSTRY

  [Features]
  · Convenient bar (4-mm steel wire) for preventing the tilting of plastic boxes (recessed square outlet boxes, recessed switch boxes) manufactured by Mirai Industry.
  · Use the reinforcing sections in slabs or in walls to make box mounting easy and prevent titling. (Boxes can be fixed directly.)
  · Uses freely bendable 4-mm steel wire so the height of the box can be freely adjusted to match the wall thickness.
  · Models with a rotation stopper just need to be plugged into boxes. Easy to fix to boxes.

  Standard Price:	SGD 2.17-
  Days to Ship:	7 Day(s) or more

• 

  Mirac Hanger

  MIRAI INDUSTRY

  [Features]
  ・ 30 mm height type with holes for attaching light fixtures, cables, etc. (combination with shaped steel fittings [SGM])
  ・ It has been cut to a length of 100 mm to 600 mm, which is frequently used, so it is easy to use and does not require any effort

  Standard Price:	SGD 0.79-
  Days to Ship:	7 Day(s) or more

• 

  Mirac Hanger (Thin Type)

  MIRAI INDUSTRY

  [Features]
  ・ It is a thin type with a height of 15 mm, so the finish is neat. A short support member that can be used for various purposes such as fixing VE pipes, steel pipes, PF pipes, etc.
  ・ By combining with abundant accessories, various parts can be attached to various places
  ・ It has been cut to a length of 100 mm to 500 mm, which is frequently used, so it is easy to use and does not require any effort
  ・ It has an octagonal hole in the center, and a commercially available fixture for ø14 round hole can be attached
  ・ Since the top surface is flat, it is hard to deform even if the pipe is fixed
  ・ The inner surface is knurled and does not slip even if a duct clip, etc., is attached
  ・ It is a metal fitting used when attaching a single saddle clamp, wall enclosure, etc., to the opening of the Mirac Hanger
  ・ The nut can be installed easily on the opening surface

  Standard Price:	SGD 1.23-
  Days to Ship:	7 Day(s) or more

Loading...