PLC (Communication Units)（Representative Standard：CSA）

• 

  CJ Series EtherNet/IP Unit

  OMRON

  PLC (communication unit) with a maximum tag data link capacity of 180,000 CH or more.
  [Features]
  ・ CJ series EtherNet/IP unit
  ·Factory automation industry standard Ethernet. Global standard (Standardization)
  ・ World standard for factory automation industry with high openness and future potential
  ・ Industrial Ethernet, that ODVA promotes standardization around the world
  ・ Communicates with Omron components (temperature controllers, sensors, etc.) as well as a wide variety of equipment from companies around the world
  ・ No need to use differently between information LAN and dedicated control network
  ・ Seamless communication between control line and information monitoring line with EtherNet/IP
  ・ Since it is a standard LAN, it can coexist with Omron FINS message communication
  ・ Improve work efficiency with common tool operations
  ・ A large amount of tag data link can be easily done without a program just by setting a connection
  ・ Data can be exchanged with tag data links between up to 256 nodes using 256 connections
  ・ The maximum transmission/reception data capacity of 1 node is 722 CH / connection data connection can be set up to 256 connections per unit, and the total transmission/reception data can be up to 184,832 CH (There is no capacity limit on the network)
  ・ Guarantees data concurrency (up to 722 CH) on a per-connection basis
  ・ You can change the tag data link settings for individual units while using the tag data link in the network
  ・ With Network Configurator, you can monitor errors in the entire system with error diagnosis and a wide variety of status flags

  Standard Price:	SGD 2,401.85
  Days to Ship:	16 Day(s)

• 

  Programmable Controller CP1L Communication Board

  OMRON

  Programmable logic controller CP1 L communication option board. There are 7 types.

  Standard Price:	SGD 56.30-
  Days to Ship:	Same day or more

• 

  Serial Communication Unit CJ1W-SCU

  OMRON

  Serial Communication Unit CJ1W-SCU

  Standard Price:	SGD 1,580.26-
  Days to Ship:	4 Day(s) or more

• 

  Ethernet unit (100BASE-TX type) CS1W-ETN21

  OMRON

  Ethernet Unit (100BASE-TX Type) CS1W-ETN21

  Standard Price:	SGD 2,355.87
  Days to Ship:	41 Day(s)

• 

  CJ series Ethernet unit (100BASE-TX type)

  OMRON

  Production control and manufacturing site can be organically connected via Ethernet.
  [Features]
  ・ Remote access of PLC via Ethernet becomes familiar
  ・ You can select various communication services according to your needs and flexibly integrate the PLC into the Ethernet of the information network
  ・ Various protocols can be realized on Ethernet
  ・ FINS message communication using UDP/IP and TCP/IP is possible in user applications and support tools (CX-Programmer, etc.) of higher-level personal computers
  ・ The built-in clock of the PLC connected to Ethernet can be automatically adjusted based on the clock of the SNTP server (A separate SNTP server is required)
  ・ Since it has a built-in FTP server function, it is possible to read data in the PLC or write data in the PLC in file units from a workstation or personal computer that has an FTP client function
  ・ The mail reception function makes it possible to execute commands for the PLC. In addition, the mail sending function can send the status of the PLC I/O memory and Ethernet unit under any trigger conditions
  ・ Supports standard protocols UDP/IP and TCP/IP, and can communicate with various devices, workstations, personal computers, Ethernet units of other manufacturers, etc.
  ・ The SMTP/POP3/SNTP server can be specified by host name in addition to the method of specifying by IP address (A separate DNS server is required)
  [Applications]
  ・ CJ1 Ethernet unit. Used for remote access from the outside

  Standard Price:	SGD 2,355.87
  Days to Ship:	4 Day(s) or more

• 

  NX Series EtherCAT Coupler Unit NX-ECC

  OMRON

  Flexibly incorporate high-speed, high-precision remote I/O that supports EtherCAT into your system
  
  ■ Features
  · Up to 63 NX units can be connected to a single coupler unit,
  contributing to flexible system configuration and space saving *1
  · High-speed remote I/O control with communications cycle as fast as 125 μs *2
  · Different NX unit types can be configured as a single slave, reducing the number of connection nodes
  · Safety units can be mixed together with standard units, integrating I/O control and safety control
  · Distributed clock (DC) support enables highly precise synchronization control
  · Units can be started up simply by configuring rotary switch settings on the main unit. Setting also possible by using a tool
  · Thanks to the built-in USB port, slave tool settings can be configured even in environments with no controller
  
  *1 Input per slave: max. 1,024 bytes; Output per slave: max. 1,024 bytes
  *2 Combination of NX701-□□□□ and NX-ECC203

  Standard Price:	SGD 200.00-
  Days to Ship:	Quote

• 

  NX Series Communication Interface Unit NX-CIF

  OMRON

  Connect serial devices to EtherCAT simply and flexibly
  
  ■ Features
  · A unit width of only 12 mm realizes space saving
  · Supports RS-232C and RS-422A/485. RS-232C 1-port and 2-port types are both available,
  enabling many different serial devices to be used
  · Both a screwless clamp terminal block (1-port type) and
  D-Sub connector (2-port type) are available as the external connection terminal, greatly reducing the time required for wiring work
  · The communication protocol supports non-procedural simple communication
  · Max. 230.4‑kbps transmission speed. The transmission speed can be selected based on the connected serial device
  · Unit setting data is backed up from the EtherCAT Coupler Unit. Improves maintainability
  · The Sysmac Studio Serial Line Monitor function allows the communication status of serial devices to be visually checked
  Devices can be started up simply and securely

  Standard Price:	SGD 602.25-
  Days to Ship:	4 Day(s) or more

• 

  Controller Link unit/support board

  OMRON

  Controller Link Unit / Support Board

  Standard Price:	SGD 1,303.17-
  Days to Ship:	4 Day(s) or more

• 

  CJ Series Controller Link Unit CJ1W-CLK

  OMRON

  Controller Link unit with significantly increased number of transmission channels to 4,000 CH.
  [Features]
  ・ A large amount of data link can be easily done without a program just by setting the data link table
  ・ The maximum number of transmission/reception data channels per node is 20,000 CH per unit (Compatible with unit Ver.1.2 or later) (Up to 62,000 CH for boards)
  ・ It guarantees data simultaneity and enables data linking of up to 4,000 channels of transmitted data per node
  ・ You can change the data link table of any setting while the data link is running
  ・ Error diagnostic tools and a wide variety of status flags allow you to monitor system-wide anomalies

  Standard Price:	SGD 1,096.26
  Days to Ship:	4 Day(s) or more

• 

  CJ Series FL-net Unit

  OMRON

  PLC (communication unit) that easily achieves high-speed communication between multi-vendor controllers.
  [Features]
  ·100BASE-TX compatible CJ series FL-net unit.
  ·Compliant with FL-net, a widely used standard.
  ·Supports cyclic transmission and message transmission.
  ·FINS communication is also possible for message transmission.
  ·Communication Function: FL-net (OPCN-2) version 2 specifications / data link function / message communication function.
  ·Number of units mountable to 1 CPU: Up to 4 units.
  ·Number of allocated units: For 1 unit.

  Standard Price:	SGD 3,559.05
  Days to Ship:	7 Day(s) or more

• 

  SYSMAC CS Series EtherNet/IP Unit CS1W-EIP21

  OMRON

  PLC with tag data link capacity of 180,000 CH or more. (Communication Unit)
  [Features]
  ・ Factory automation industry standard Ethernet / global standard (Standardization)
  ・ World standard for factory automation industry with high openness and future potential
  ・ Communicates with Omron components (temperature controllers, sensors, etc.) as well as a wide variety of equipment from companies around the world
  ・ No need to use differently between information LAN and dedicated control network
  ・ Seamless communication between control line and information monitoring line with EtherNet/IP
  ・ Uses the world standard open protocol (CIP)
  ・ Seamless data flow between control lines and information monitoring lines in a single network system was achieved
  ・ Since it is a standard LAN, it can coexist with Omron FINS message communication
  ・ A large amount of tag data link can be easily done without a program just by setting a connection
  ・ Data can be exchanged with tag data links between up to 256 nodes using 256 connections
  ・ The maximum transmission/reception data capacity of 1 node is 722 CH / connection data connection can be set up to 256 connections per unit, and the total transmission/reception data can be up to 184,832 CH (There is no capacity limit on the network)
  ・ Guarantees data concurrency (up to 722 CH) on a per-connection basis
  ・ You can change the tag data link settings for individual units while using the tag data link in the network
  ・ With Network Configurator, you can monitor errors in the entire system with error diagnosis and a wide variety of status flags

  Standard Price:	SGD 2,401.85
  Days to Ship:	4 Day(s) or more

• 

  SYSMAC CS Series FL-net Unit CS1W-FLN22

  OMRON

  SYSMAC CS Series FL-net Unit CS1W-FLN22

  Standard Price:	SGD 2,965.71
  Days to Ship:	7 Day(s) or more

• 

  Serial Communication Board/Serial Communication Unit

  OMRON

  Serial Communication Board / Serial Communication Unit

  Standard Price:	SGD 620.73-
  Days to Ship:	4 Day(s) or more

Loading...