(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Phoenix Face Milling Machine, Insert for Octagon Type and Bore Type (Part Numbers)
It is so shaped as to combine high stiffness and sharp cutting performance due to the negative blade shape and positive relief angle.
Part Number
Configured Part Number is shown.
OZKU060508SR-GM-XC1015
Product features and specifications
Basic specifications and features of the product
Insert shape
A shape that combines high stiffness and sharp cutting edge due to the negative rake angle and positive relief angle
- Economical specifications with 8 corners on front and back (16 corners in total). Maximum notch 3.5 mm
- Surface roughness is improved by the shape of the wiper edge. Wiper edge = 2 mm
- It is possible to suppress variations by matching the numbers of each insert.
Performance/test information
Roughing process of hydraulic valve parts
The workpiece shape had many holes so a severe intermittent processing was required. Stable machining was possible even under high-speed conditions in such a machining environment, the durability per corner has been greatly improved, and now cost reduction can be expected.
| Tools to use | PAO06R160M50.8W-20 (φ160 × 20 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | OZKU060508SR-GM (XC1015) | Carbide coating insert |
| Work material | FCD600 | |
| Cutting speed | 250 m/minute (500 minutes^-1) | |
| Feed speed | 3,000 mm/minute (0.3 mm/t) | |
| Depth of cut | ap = 3 mm, ae = 120 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Vertical machining center (BT50) | |
Number of workpieces for processing
Photograph of insert after processing 16 workpieces / main cutting edge wear
Roughing of machine parts
Since the cutting force can be kept low, stable machining can be performed by increasing the efficiency by 1.8 times. An additional 1.5 times more durability was obtained.
| Tools to use | PAO06R125M38.1-12 (φ125 × 12 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | OZKU060508SR-GM (XC1015) | Carbide coating insert |
| Work material | FC250 | |
| Cutting speed | 200 m/minute (500 minutes^-1) | 157 m/minute (400 minutes^-1) |
| Feed speed | 1,800 mm/minute (0.3 mm/t) | 1,000 mm/minute (0.3 mm/t) |
| Depth of cut | ap = 2 mm, ae = 90 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Double-column machining center (BT50) | |
Number of workpieces for processing
Roughing of hydraulic valves
Previously, a single-sided 8-corner specification type was used, but with PAO, the number of usable corners has doubled and the corner unit price has been reduced. In addition, the cutting amount can be increased by 25%, and the durability has doubled.
| Tools to use | PAO06R125M38.1-12 (φ125 × 12 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | OZKU060508SR-GM (XC1015) | Carbide coating insert |
| Work material | FCD500 | |
| Cutting speed | 150 m/minute (380 minutes^-1) | 150 m/minute (300 minutes^-1) |
| Feed speed | 900 mm/minute (0.2 mm/t) | 720 mm/minute (0.27 mm/t) |
| Depth of cut | ap = 3 mm, ae = 50 to 80 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Double-column machining center (BT50) | |
Number of workpieces for processing
Long lifespan machining of Inconel 718
Other companies' products had chipping and defects at an early stage, but PAO (XC5040) was able to improve durability by approx. 4 times by suppressing wear.
| Tools to use | PAO06R125M38.1-12 (φ125 × 12 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | OZKU060508ER-SM (XC5040) | Double-sided insert |
| Work material | Inconel 718 | |
| Cutting speed | 40 m/minute (100 minutes^-1) | |
| Feed speed | 120 mm/minute (0.1 mm/t) | |
| Depth of cut | ap = 1.5 mm, ae = 50 mm | |
| Cutting Oil | Water-soluble cutting oil | |
| Machine used | Vertical machining center (BT50) | |
2 m at the time of processing / cutting chips
Roughing of the press mold reference surface
With the conventional product, defects frequently occurred due to severe intermittent processing and poor machinability. The high stiffness GR breaker has enabled stable processing and improved durability.
| Tools to use | PAO06R100M31.7-10 (φ100 × 10 flutes) |
|---|---|
| Insert used (grade) | OZKU060508SR-GR (XC1015) |
| Work material | Equivalent to FCD500 |
| Cutting speed | 150 m/minute (477 minutes^-1) |
| Feed speed | 1,400 mm/minute (0.3 mm/t) |
| Depth of cut | ap = 3 mm, ae = 60 mm |
| Cutting Oil | N/A (air blow) |
| Machine used | Double-column machining center (BT50) |
| Processing time | 2 hours 30 minutes |
2 hours 30 minutes at the time of processing
Drawing
Recommended cutting conditions
Recommended cutting condition table
Precautions for cutting conditions
- The values in the recommended cutting condition table show general values at actual cutting speed. Please adjust appropriately according to the cutting environment.
Compatible work material
Recommended material for each work material
◎: First recommended material○: Second recommended material
GL: For light cutting · GM: For medium cutting · GR: For heavy cutting · SM: For heat-resistant alloys
Selection support information
Selection support information
Face milling machine, octagon type, bore type, PAO BOREType 1
Power screw specification / with oil hole
Type 2
With lubrication hole
Type 3
Without oil hole
Screw mount type
| Tool No. | Nominal | Outer diameter DC | Cutter outer diameter DCX | Number of flutes ZEFP | Cutter height LF | Boss diameter DCSFMS | Hole diameter DCON | Flange keyway | APMX | Weight (kg) | Shape type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width KWW | Depth b | |||||||||||
| 7802020 | PAO06R050M22-5 | 50 | 60.2 | 5 | 40 | 45 | 22 | 10.4 | 6.3 | 3.5 | 0.35 | 1 |
| 7802021 | PAO06R063M22-7 | 63 | 73.2 | 7 | 40 | 50 | 22 | 10.4 | 6.3 | 3.5 | 0.51 | 2 |
| 7802022 | PAO06R080M25.4-8 | 80 | 90.2 | 8 | 50 | 60 | 25.4 | 9.5 | 6 | 3.5 | 1.05 | 2 |
| 7802023 | PAO06R100M31.7-10 | 100 | 110.2 | 10 | 50 | 70 | 31.75 | 12.7 | 8 | 3.5 | 1.51 | 3 |
| 7802024 | PAO06R125M38.1-12 | 125 | 135.2 | 12 | 63 | 90 | 38.1 | 15.9 | 10 | 3.5 | 2.98 | 3 |
Type 4
Without oil hole
Type 5
Without oil hole
Wedge stop type
| Tool No. | Nominal | Outer diameter DC | Cutter outer diameter DCX | Number of flutes ZEFP | Cutter height LF | Boss diameter DCSFMS | Hole diameter DCON | Flange keyway | APMX | Weight (kg) | Shape type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width KWW | Depth b | |||||||||||
| 7802089 | PAO06R100M31.7W-14 | 100 | 110.2 | 14 | 50 | 70 | 31.75 | 12.7 | 8 | 3.5 | 1.37 | 4 |
| 7802091 | PAO06R125M38.1W-17 | 125 | 135.2 | 17 | 63 | 90 | 38.1 | 15.9 | 10 | 3.5 | 2.81 | 4 |
| 7802093 | PAO06R160M50.8W-20 | 160 | 170.2 | 20 | 63 | 100 | 50.8 | 19 | 11 | 3.5 | 4.50 | 4 |
| 7802095 | PAO06R200M47.6W-25 | 200 | 210.2 | 25 | 63 | 150 | 47.625 | 25.4 | 14 | 3.5 | 7.75 | 5 |
| Part Number |
|---|
| OZKU060508SR-GM-XC1015 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Data for CAM / Tool Management Software | Material Type | Nominal | Tool No | Availability of CAD Data (2D/3D) |
|---|---|---|---|---|---|---|---|---|---|---|
SGD 28.32 | 10 Piece(s) | 3 Day(s) | Cast Iron | - | XP3035 | OZKU060508SR-GM | 7812062 | - |
Loading...
Basic Information
| Shape (First Character in Model Number) | O (Octagonal) | Clearance Angle | Others | Dimensions Inscribed Circle Diameter B(mm) | 17.1 |
|---|---|---|---|---|---|
| Dimension Thickness T(mm) | 5.66 | R(mm) | 0.8 | Sub Blade B(mm) | 2 |
| Material | Coating | Number of Teeth | 16 | Blade Length(mm) | 6 |
Specification/Dimensions
-
Data for CAM / Tool Management Software
- zoller
-
type
- OZKU
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Heat-Resistant Alloy, Titanium Alloy
-
Material Type
-
Nominal
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?