(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Terminal block XW4 series for printed circuit boards.
- On Sale Till 31/03/2025
A terminal block for PCBs that is ideal for interfaces to control equipment.
[Features]
Push-in type
・ 3.5-mm, 5.0-mm pitch terminal block
・ With single wire / pin terminal, you can easily connect by simply inserting the cable
・ Stranded wire can be easily connected with a general screwdriver
Thread type
・ 3.81-mm, 5.08-mm pitch terminal block
・ The connection terminal thread section has a finger protection structure
・ Connection is possible without crimp terminals
・ Adoption of a unique cable crimp structure that does not directly apply force to the circuit board soldering part
Japanese Only
Part Number
Configured Part Number is shown.
Push-In Type / Screw-Type Terminal Blocks For Circuit Boards
Used for control equipment interfaces.
XW4 PCB Terminal Block Outline Drawings/Dimensions
Horizontal type - model XW4C-□□D1-H1 outline drawing
Dimensional drawing
PCB processing dimensions
Vertical type - model XW4C-□□D1-V1 outline drawing
Dimensional drawing
PCB processing dimensions
| Dimensions (mm) Number of Contacts | A | B |
|---|---|---|
| 2 | 8.4 | 3.5 |
| 3 | 11.9 | 7.0 |
| 4 | 15.4 | 10.5 |
| 5 | 18.9 | 14.0 |
| 6 | 22.4 | 17.5 |
| 7 | 25.9 | 21.0 |
| 8 | 29.4 | 24.5 |
| 9 | 32.9 | 28.0 |
| 10 | 36.4 | 31.5 |
Table of Dimensions
| Shape | Horizontal Type | Vertical Type |
|---|---|---|
| Number of Contacts | Model | Model |
| 2 | Model XW4C-02D1-H1 | Model XW4C-02D1-V1 |
| 3 | Model XW4C-03D1-H1 | Model XW4C-03D1-V1 |
| 4 | Model XW4C-04D1-H1 | Model XW4C-04D1-V1 |
| 5 | Model XW4C-05D1-H1 | Model XW4C-05D1-V1 |
| 6 | Model XW4C-06D1-H1 | Model XW4C-06D1-V1 |
| 7 | Model XW4C-07D1-H1 | Model XW4C-07D1-V1 |
| 8 | Model XW4C-08D1-H1 | Model XW4C-08D1-V1 |
| 9 | Model XW4C-09D1-H1 | Model XW4C-09D1-V1 |
| 10 | Model XW4C-10D1-H1 | Model XW4C-10D1-V1 |
Model
- *Refer to the catalog for model numbers and types other than those above.
XW4 Specifications
Model XW4C Terminal Block for Circuit Boards (Push-In Type)
| Model | Model XW4C-□□D1-□□ | Model XW4C-□□E1-□□ | Note | |
|---|---|---|---|---|
| Terminal Pitch: 3.5 mm | Terminal Pitch: 5.0 mm | |||
| IEC/DIN VDE *1 | Rated Voltage | 200 V AC | 400 V AC | |
| Rated Current | 17.5 A | 24 A | Ambient Temperature: 40°C or Less | |
| UL/CSA *2 | Rated Voltage | 300 V AC | 300 V AC | |
| Rated Current | 10 A | 10 A | ||
| Withstand Voltage | 2,500 V AC | 4,000 V AC | 1 min | |
| Insulation Resistance | 5 MΩ or Less (500 V DC) | |||
| Wire Stripping Length | 10 mm *3 | ±1 mm | ||
| Operating Temperature Range | -40 to +100°C (Assuming No Condensation or Freezing) | |||
Model XW4C Terminal Block for Circuit Boards (Push-In Type)
*1. Rated to conform with IEC and DIN VDE standards.
*2. Rated to conform with UL and CSA standards.
*3. If using rod terminals, make sure the wiring setup is appropriate for the rod terminals to be used.
| Model | Model XW4C |
|---|---|
| Housing | PA (UL94 V-0)/Green |
| Contact | Copper Alloy / Tin Plating (5 μm) |
| Spring | Stainless Steel |
| Cover | PA (UL94 V-0)/Green |
Material / surface treatment
| 3.5 mm Pitch | 5.0 mm Pitch | ||
|---|---|---|---|
| Single Wire | 0.2 mm2 to 1.5 mm2 | 0.2 mm2 to 4.0 mm2 | |
| Stranded wire | 0.2 mm2 to 1.5 mm2 | 0.2 mm2 to 2.5 mm2 | |
| Rod Terminal | Without Sleeve | 0.25 mm2 to 1.5 mm2 | 0.25 mm2 to 2.5 mm2 |
| With Sleeve | 0.25 mm2 to 0.75 mm2 | 0.25 mm2 to 1.5 mm2 | |
| AWG | 24-16 | 24-12 | |
Conforming wire
Model XW4 Terminal Block for Circuit Boards (Screw Type), Connector Terminal Block
| Model | Model XW4E-□□B1-V1 Model XW4E-□□B1-S1 (Small / Inclined Type Terminal Block) | Model XW4E-□□B2-V1 (Double-Tier Terminal Block) | Model XW4A-□□B1-H1 Model XW4A-□□B1-V1 Model XW4B-□□B1-H1 (Connector Terminal Block) | Note | |
|---|---|---|---|---|---|
| Terminal Pitch: 3.81 mm | |||||
| IEC/DIN, VDE *1 | Rated Voltage | 160 V AC | |||
| Rated Current | 10 A | 8 A | 8 A | Ambient Temperature: 40°C or Less | |
| UL/CSA *2 | Rated Voltage | 300 V AC | |||
| Rated Current | 10 A | 8 A | |||
| Withstand Voltage | 2,500 V AC | 1 min | |||
| Insulation Resistance | 100 MΩ or More | 500 V DC | |||
| Connecting Wire Range | AWG26 to AWG16 | AWG28 to AWG16 | Strand Wire | ||
| Wire Stripping Length | 5 mm | 7 mm | ±1 mm | ||
| Tightening Torque | 0.22 to 0.25 N·m | ||||
| Operating Temperature Range | -40 to +100°C (Assuming No Condensation or Freezing) | ||||
Type with a terminal pitch of 3.81 mm
| Model | Model XW4E-□□C1-V1 Model XW4E-□□C1-S1 (Small / Inclined Type Terminal Block) | Model XW4E-□□C2-V1 (Double-Tier Terminal Block) | Model XW4A-□□C1-H1 Model XW4A-□□C1-V1 Model XW4B-□□C1-H1 (Connector Terminal Block) | Note | |
|---|---|---|---|---|---|
| Terminal Pitch: 5.08 mm | |||||
| IEC/DIN, VDE *1 | Rated Voltage | 250 V AC | |||
| Rated Current | 13.5 A | 14 A | 12 A | Ambient Temperature: 40°C or Less | |
| UL/CSA *2 | Rated Voltage | 300 V AC | |||
| Rated Current | 10 A | 16 A | 15 A | ||
| Withstand Voltage | 3,000 V AC | 1 min | |||
| Insulation Resistance | 100 MΩ or More | 500 V DC | |||
| Connecting Wire Range | AWG26 to AWG16 | AWG24 to AWG14 | Strand Wire | ||
| Wire Stripping Length | 6 mm | 7 mm | ±1 mm | ||
| Tightening Torque | 0.5 to 0.6 N·m | ||||
| Operating Temperature Range | -40 to +100°C (Assuming No Condensation or Freezing) | ||||
Type with a terminal pitch of 5.08 mm
| Model | Model XW4E (Small / Inclined Type / Double Tier Terminal Block) | Model XW4A (Connector Type Terminal Block / Circuit Board Side) | Model XW4B (Connector Type Terminal Block / Wire Side) |
|---|---|---|---|
| Housing | PA (UL94 V-0)/Green | PBT (UL94 V-0) / Green or PA (UL94 V-0) / Green | PA (UL94 V-0)/Green |
| Terminal Screw | Copper Alloy / Tin Plating | - | Copper Alloy / Tin Plating |
| Clamp Gauge | Copper Alloy / Nickel Plating | - | Copper Alloy / Nickel Plating |
| Contact | Copper Alloy / Nickel Base, Tin Plating | ||
Material / surface treatment
How To Connect This Product
Push-In Type Terminal Block Connection Method (Model XW4C)
How to connect when using a rod terminal / single wire
How to remove
How to connect / remove when using bare wire
| Type | A | B |
|---|---|---|
| Maximum | 1.6 | 10.0 |
| Minimum | 1.1 |
Applicable terminal block information - 3.5 mm pitch (units: mm)
| Type | A | B |
|---|---|---|
| Maximum | 2.1 | 10.0 |
| Minimum | 1.1 |
Applicable terminal block information - 5.0 mm pitch (units: mm)
Reference pitch dimensional drawing
- *Do not apply excessive force to the terminal block when inserting tools. Doing so may cause damage to the terminal block.
How to connect screw-type terminal blocks
(Model XW4A, Model, XW4B, Model XW4E)
When using crimp terminals
- 1. Use rod type or plate type terminals. However, as the terminal block is a small type, be sure to check the information listed below before use.
- 2. When using crimp terminals, be aware that the insulation between the crimp terminals will be not be a finger-protecting structure if bare crimp terminals are used. Also be aware that the insulation distance between adjacent terminal blocks will be smaller.
Tightening terminal block screws
(Model XW4A, Model XW4B, Model XW4E)
- 1.Use a dedicated screwdriver (Model XW4Z-00B, -00C) when tightening terminal screws. Because it matches the slot width of the terminal screws, it will not damage the terminal screws.
- 2. Tighten the terminal screws according to "Tightening Torques" detailed in "Ratings/Performance". Doing this will prevent the screws from becoming loose or the wires from disconnecting.
Performing continuity checks on the terminal block screw heads
(Model XW4A, Model XW4B, Model XW4E)
Make sure the screws are tightened when performing continuity checks on the screw heads.
If a screw is not tightened or only partially tightened, it may cause it to become structurally non-conductive.
| Part Number |
|---|
| XW4C-02D1-H1 |
| XW4C-02D1-V1 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Wiring Method | Mounting Method | Number of Poles (Pole) | Screw Size | Rated current (VDE) (A) | Rated current (IEC/DIN) (A) | Rated current (UL/CSA) (A) | Type | Connector Shape | Pitch Between Terminals (mm) | Conforming Wire |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 1.21 SGD 0.24 | 1 Piece(s) | Same day | - | Push-in | PCB | 2 | Push-in method | 17.5 | 17.5 | 10 | PCB terminal block | Horizontal type | 3.5 | AWG24-AWG16 | ||
SGD 1.17 SGD 0.23 | 1 Piece(s) | Same day | 10 | Push-in | PCB | 2 | Push-in method | 17.5 | 17.5 | 10 | PCB terminal block | Vertical type | 3.5 | AWG24-AWG16 |
Loading...
Basic Information
| Parts/Completed products | Assembled product |
|---|
Specification/Dimensions
-
Wiring Method
- Screw
- Push-in
-
Mounting Method
- PCB
- Socket connection
-
Number of Poles(Pole)
-
Rated current (VDE)(A)
-
Rated current (IEC/DIN)(A)
-
Rated current (UL/CSA)(A)
-
Type
- Connector terminal block
- PCB terminal block
-
Connector Shape
- Cable pullout type (with screw)
- Horizontal type
- Inclined type
- L type terminal
- Straight terminal
- Vertical type
-
Pitch Between Terminals(mm)
- 3.5
- 3.81
- 5.08
-
Conforming Wire
- AWG24-AWG14
- AWG24-AWG16
- AWG26-AWG16
- AWG28-AWG16
-
Screw Size
Days to Ship
-
- All
- Same day
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?