(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Multi-Purpose Circular Waterproof Connector, RM-W Series (JR16WCCA-8(72))
This is a RM series waterproof connector. A waterproof function has been added, while maintaining the features of the conventional product.
Japanese Only
Part Number
Configured Part Number is shown.
JR16WCCA-8(72)
Main Features of RM-W Series Multi-Purpose Circular Waterproof Connectors
The RM-W series features a threaded coupling type lock mechanism that provides reliable waterproof performance
Assembly type (straight plug / RM15W)
Assembly type (right-angle plug / RM15W)
1. Abundant variations
The RM-W series features a wide variety of plugs and receptacles, enabling you to find the ideal product for the given application.
Three types of plugs are available: straight type, straight low-profile type and right-angle type.
A single-unit, waterproof type receptacle is available in which the connector itself is waterproof.
The screw-fastening type is available either as a front mounting type or a back mounting type.
Available number of contacts: 2, 3, 4, 8, 10, 12, 15, 20, 40, 55. Two types of contact plating are available: gold plating and silver plating.
2. Waterproof structure
Meets IP68 standards for waterproof performance when mated. Also, the single unit waterproof receptacle features IP68-class waterproof performance.
3. Flexible cable arrangement
With the assembly type right-angle plug, the cable can be pulled out in any direction (360° range.)
Product Standards
RM15WT Size Products
| Rating | Rated voltage | 600 V AC, 840 V DC (2-contact) 500 V AC, 700 V DC (3-, 4-, 8-contact) 350 V AC, 490 V DC (10-contact) 350 V AC, 490 V DC (12-contact) |
|---|---|---|
| Rated Current | 10 A (2-, 3-, 4-contact) 5 A (8-, 10-, 12-contact) | |
| Operating temperature range (Note 1) | -25°C to +85°C | |
| Storage temperature range (Note 2) | -10°C to +60°C |
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Contact resistance | 2-, 3-, 4-contacts: 2 mΩ or less, 8-, 10-, 12-contacts: 4 mΩ or less | Measure at 1 A DC | |
| 2. Insulation resistance: | 1,000 MΩ or more | Measure at 500 V DC | |
| 3. Withstand voltage | There shall be no flashover or dielectric breakdown | 2-contacts: 1,800 V AC 3-contacts: 2,000 V AC 4-, 8-contacts: 1,500 V AC 10-, 12-contacts: 1,000 V AC | Apply for 1 min. |
| 4. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | Test at frequency 10 to 55 to 10 Hz for 1 cycle and at half-amplitude of 0.75 mm in three directions for 10 cycles | |
| 5. Shock | There shall be no electrical discontinuity for 10 μs or greater | Test at acceleration of 490 m/s2, duration of 11 ms with sine half waveform in 6 directions, 3 times each | |
| 6. Mating cycle | 2-, 3-, 4-contacts: 4 mΩ or less, 8-, 10-, 12-contacts: 8 mΩ or less | Measure contact resistance after 2,000 operations | |
| 7. Temperature cycle | 100 MΩ or more | Test at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > +85°C: 30 mins.> Room temperature: 10 to 15 mins for 5 cycles. | |
| 8. Humidity resistance (steady state) | 100 MΩ or more (when dry) | Measure insulation resistance after leaving at a temperature of 40°C and humidity of 90 to 95% for 96 hours | |
| 9. Waterproofing | No water penetration inside connector | Leave at water depth of 1.8 m for 48 hours while mated with the connector. | |
(Note 1) The operating temperature range includes temperature increases caused by the flow of current.
(Note 2) The storage temperature range refers to the long-term storage of unused products that have not undergone termination. The operating temperature and humidity range are applicable in a non-energized state after termination.
RM21WT to RM31WT Size Products
| Rating | Rated voltage | 600 V AC, 840 V DC (40-contacts) 500 V AC, 700 V DC (15-contacts, 55-contacts) 350 V AC, 490 V DC (20-contacts) |
|---|---|---|
| Rated Current | 5 A | |
| Operating temperature range (Note 1) | -25°C to +85°C | |
| Storage temperature range (Note 2) | -10℃ to +60℃ |
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Contact resistance | 4 mΩ or less | Measure at 1 A DC | |
| 2. Insulation resistance: | 1,000 MΩ or more | Measure at 500 V DC | |
| 3. Withstand voltage | There shall be no flashover or dielectric breakdown | 40-contacts: 1,800 V AC 15-, 55-contacts: 1,500 V AC 20-contacts: 1,000 V AC | Apply for 1 min. |
| 4. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | Test at frequency 10 to 55 to 10 Hz for 1 cycle and at half-amplitude of 0.75 mm in three directions for 10 cycles | |
| 5. Shock | There shall be no electrical discontinuity for 10 μs or greater | Test at acceleration of 490 m/s2, duration of 11 ms with sine half waveform in 6 directions, 3 times each | |
| 6. Mating cycle | 8 mΩ or less | Measure contact resistance after 2,000 operations | |
| 7. Temperature cycle | 100 MΩ or more | Test at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > +85°C: 30 mins.> Room temperature: 10 to 15 mins for 5 cycles. | |
| 8. Humidity resistance (steady state) | 100 MΩ or more (when dry) | Measure insulation resistance after leaving at a temperature of 40°C and humidity of 90 to 95% for 96 hours | |
| 9. Waterproofing | No water penetration inside connector | Leave at water depth of 1.8 m for 48 hours while mated with the connector. | |
(Note 1) The operating temperature range includes temperature increases caused by the flow of current.
(Note 2) The storage temperature range for the above standards refers to the long-term storage of unused products that have not undergone termination. The operating temperature and humidity range are applicable in a non-energized state after termination.
Product Materials/Processing
RM15WT Size Products
| Item | Materials | Finish | Note |
|---|---|---|---|
| Exterior | Zinc alloy, brass | Chromium plating or nickel plating | - |
| Insulator | Diallylphthalate resin | - | UL94V-0, (black) |
| Contacts | Brass, phosphor bronze, or copper alloy | Silver plating or gold plating | - |
| Gasket | SIR (black or red) or NBR (gray) | - | - |
Materials/Finish
(Note) Do not mix different contact platings (e.g. don't combine gold and silver platings.)
RM21WT to RM31WT Size Products
| Item | Materials | Finish | Note |
|---|---|---|---|
| Exterior | Brass | Chromium plating or nickel plating | - |
| Insulator | Diallylphthalate resin | - | UL94V-0, (black) |
| Contacts | Brass or copper alloy | Silver plating | - |
| Gasket | Chloroprene rubber or SIR | - | (Black) |
Materials/Finish
(Note) Do not mix different contact platings (e.g. Do not combine gold and silver platings.)
Connector Usage Precautions
- 1. Make sure the power is off before mating or un-mating the connector.
- 2. Use connectors with socket (female) contacts at the power side of the circuit.
- 3. Make sure that the coupling is in the completely locked position (fully tightened state.)
- 4. Always use the correct plug / receptacle to assure water protection.
| Part Number |
|---|
| JR16WCCA-8(72) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Allowable Voltage (V) | Wiring Method | Connection direction | Shell Size | Plating of part touching terminal | Product Category | Specifications | Features | Conforming cable outer diameter (mm) | Special Notes | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 7.44 | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA | Without screw | φ8 | - | - | - | - | - |
Loading...
Basic Information
| Connector Shape | Round shape | Connector series initials | P/Q/R | P/Q/R | RM |
|---|---|---|---|---|---|
| Protection function (environmentally resistant) | IP67 | Operating Temperature Range(°C) | -25 to +85 |
Please check the type/dimensions/specifications of the part JR16WCCA-8(72) in the Multi-Purpose Circular Waterproof Connector, RM-W Series series.
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- Panel Mount
-
Rated Current(A)
-
Allowable Voltage(V)
-
Wiring Method
- Solder
-
Connection direction
- Straight
-
Shell Size
-
Plating of part touching terminal
- Gold
- No terminal
- Silver
-
Product Category
- Cord clamp
- Plug
- Receptacle
-
Specifications
- For RM12WBP
- For RM15WTPZA
- For RM21WTP
- For RM21WTPS
- For RM24WTP
- For RM31WTP
- Front Mount
- Low Profile
- NA
-
Features
- NA
- Nut tightening
- Screw tightening
- Without screw
-
Conforming cable outer diameter(mm)
- φ4
- φ5
- φ6
- φ7
- φ8
- φ10
- φ11
- φ12
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| JR16WCC-11(72) |
| JR16WCC-12(72) |
| JR16WCC-6(72) |
| RM12WBP-CP(4)(71) |
| RM12WBP-CP(5)(71) |
| RM12WBP-CP(6)(71) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Allowable Voltage (V) | Wiring Method | Connection direction | Shell Size | Plating of part touching terminal | Product Category | Specifications | Features | Conforming cable outer diameter (mm) | Special Notes | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 12.15 | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA / For RM21WTPS | Screw tightening | φ11 | - | - | - | - | - | ||
SGD 12.04 | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA / For RM21WTPS | Screw tightening | φ12 | - | - | - | - | - | ||
SGD 19.92 | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA / For RM21WTPS | Screw tightening | φ6 | - | - | - | - | - | ||
SGD 5.16 | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ4 | - | - | - | - | - | ||
SGD 7.10 | 1 Piece(s) | 4 Day(s) or more | 10 | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ5 | - | - | - | - | - | ||
SGD 5.25 | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ6 | - | - | - | - | - |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?