(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
DeviceNet Compliant Connector, HR31 Series
These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.
Japanese Only
Part Number
Configured Part Number is shown.
HR31-5.08R-5PD(76)
DeviceNet Compliant Interface Connector With Miniaturized Plug Connector For Simplified Terminations
Compliant with FA network devices
Total space occupied by mated assemblies
Includes screw lock
Main Features of HR31 Series DeviceNet Compliant Connector
HR31
Products made by other manufacturers
| Item | Products made by other manufacturers | HR31 |
|---|---|---|
| Reduced number of termination operations | Crimp the wire to a commercially-available cap connector and insert it into the housing and fasten with the screw. (*) | Crimp and connect onto the contact, and then fasten by simply inserting into the housing. |
| Supports high-density mounting | Plug height is 15 mm. | Because the plug height has a low-profile at just 10.2 mm, it supports higher density mounting on connector mounting surfaces. |
| Prevention of connection errors | Contact positions not identified | Permanently identified contact positions. |
| Reducing the number of required operations to secure receptacle assembly to the board | Connectors are secured from the underside of the board using screws. | No need for screws; features built-in locking pins which secure the connector to the board. |
- *Although it is possible to terminate discrete cables with screws and not use a pin contact, there are potential issues and concerns for long-term reliability. Therefore, most manufacturers recommend to use crimp contacts.
Product Specifications
Product Standards
| Rating | Rated Current | 12 A (when using 2.5 mm2wire) 10 A (when using a 1.5 mm2 wire) | Operating Temperature Range | -40°C to +100°C |
|---|---|---|---|---|
| Rated voltage | 250 V AC, 350 V DC | Storage temperature range | -40°C to +85°C |
| Item | Standard | Conditions |
|---|---|---|
| 1. Contact resistance | 5 mΩ or less | Measure at 1 A DC |
| 2. Insulation resistance: | 1,000 MΩ or more | Measure at 500 V DC |
| 3. Withstand voltage | There shall be no flashover or dielectric breakdown | 2,000 V AC for 1 min. |
| 4. Impulse withstand voltage | There shall be no flashover or dielectric breakdown | 4‑KV standard waveform, positive and negative, 3 times each |
| 5. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | 10 Hz to 55 Hz to 10 Hz: 5 mins. Single amplitude 0.75 mm, Three directions, 10 cycles each |
| 6. Mating cycle | Contact resistance: 10 mΩ or less | 1,000 times |
| 7. Temperature cycle | Insulation resistance: 1,000 MΩ or more | -40°C: 30 mins. > Room temperature: 10 to 15 mins. > +100°C: 30 mins. > Room temperature: 10 to 15 mins for 5 cycles |
| 8. Humidity resistance | Insulation resistance: 10 MΩ or more (at high humidity) 100 MΩ or more (when dry) | Temperature: 40°C, Humidity: 90 to 95%, 96 hours |
Materials
| Item | Materials | Finish | Note | |
|---|---|---|---|---|
| Plug | Insulator | PBT resin | Black/green | UL94V-0 |
| Screw | Steel | Nickel plating | ||
| Crimp contact | Female contacts | Contact area: phosphor bronze, Termination area: copper | Contact area: gold plating, Termination area: tin plating | |
| Receptacle | Insulator | PBT resin | Black/green | UL94V-0 |
| Male contact | Brass | Gold plating | ||
| Nut | Steel | Nickel plating | ||
| Pin | Phosphor bronze | Tin plating | Board retention pin | |
Product Usage Precautions
1. To prevent damage, align the receptacle with the panel and board in such a way that it is not subject to excess loads.
1.1 Dimensions of recommended mounting panel (right-angle DIP)
| Product No. | A | |
|---|---|---|
| HR31-5.08R-5PDL(**) | 36 | +0.2 0 |
1.2 Dimensions of recommended mounting panel (straight DIP)
| Product No. | B | |
|---|---|---|
| HR31-5.08R-5PD(**) | 36 | +0.2 0 |
2. Insert the crimp contact into the plug in the direction shown below.
Crimp contact / wire
3. Use a number 0 cross drive bit to tighten the screw lock's screw.
4. Make sure the power is off before mating or un-mating the connector.
| Part Number |
|---|
| HR31-5.08R-5PD(76) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Specifications | Features | Circuit Board Mounting | Conforming Cable | Terminal pitch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 6.09 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 5 | For PCB | 12 | Solder | Straight | Gold | Receptacle | Screw lock type | Insulation color: green | Through hole mounting (DIP) | NA | 5.08 |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | G/H/I | G/H/I | HR |
|---|---|---|---|---|---|
| Allowable Voltage(V) | AC250 / DC350 | Operating Temperature Range(°C) | -40 to +100 |
Please check the type/dimensions/specifications of the part HR31-5.08R-5PD(76) in the DeviceNet Compliant Connector, HR31 Series series.
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Cable Connection
-
Rated Current(A)
-
Connection direction
- Straight
-
Plating of part touching terminal
- Gold
- No terminal
-
Product Category
-
Specifications
- NA
- Screw lock type
-
Features
- Insulation color: green
- NA
-
Circuit Board Mounting
- NA
- Through hole mounting (DIP)
-
Conforming Cable
- 0.25 to 1.65 mm2
- 1.04 to 2.63 mm2
- NA
-
Wiring Method
- Solder
- Crimp
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| HR31-5.08P-5SC(72) |
| HR31-SC-121(71) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Specifications | Features | Circuit Board Mounting | Conforming Cable | Terminal pitch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 3.92 | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 5 | [Cable Connection] Cable Connection | 12 | Crimp | Straight | No terminal | Plug | Screw lock type | Insulation color: green | NA | 0.25 to 1.65 mm2 / 1.04 to 2.63 mm2 | 5.08 | ||
SGD 1.56 | 1 Piece(s) | 3 Day(s) or more | - | Female | - | - | 10 | Crimp | - | Gold | Loose terminal | NA | NA | NA | 0.25 to 1.65 mm2 | - |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?