(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series
A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
Japanese Only
Part Number
Configured Part Number is shown.
FX15S-41P-0.5SD
LVDS Signal Compatible Shielded Connector With Shared Board Side Connector and Selectable Cable Side
Discrete cable and small-gauge coaxial cable can be selected
Main Features of FX15 Series 1‑mm Pitch Board-To-Cable Connector For LVDS Signals
The double-row contact and single-row lead design help save on space and ensure equal length transmission lines
Mounting section: 0.5‑mm pitch single-row structure
Contact section: 1‑mm pitch staggered double-row structure
Contacts consolidated into 1 row for equal length transmission lines
Good mating performance thanks to the large guide shape
Large guide post
Superior side lock operation
Type with metal shields (FX15, FX15S Series)
Type without metal shield (FX15M Series)
High shielding effects
Product Standards
| Rating | Rated current Rated voltage | 0.5 A 100 V AC | Operating temperature range Storage temperature range | -55 to 80°C (Note 1) -10 to 60°C (Note 2) |
|---|
| Item | Standard | Conditions |
|---|---|---|
| 1. Contact resistance | 60 mΩ or less (Note 3) | Measure at 1 mA |
| 2. Insulation resistance | 500 MΩ or more | Measure at 100 V DC |
| 3. Withstand voltage | There shall be no flashover or dielectric breakdown | Energize at 300 V AC for 1 min. |
| 4. Total mating / un-mating force | Insertion force: 30 N or less Extraction force: 2 N or more | Measure using a compatible connector |
| 5. Durability (Mating / Un-mating) | Contact resistance: 80 mΩ or less (Note 3) | 50 mating / un-mating cycles |
| 6. Vibration Resistance | There shall be no electrical discontinuity for 1 μs or greater | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three axial directions, 2 hours each |
| 7. Shock Resistance | There shall be no electrical discontinuity for 1 μs or greater | Acceleration: 490 m/s2, Duration: 11 ms, Half sine wave, Three times each in 3 axial directions |
| 8. Humidity resistance | Contact resistance: 80 mΩ or less (Note 3) No damage, cracks, or parts dislocation | Temperature: 40°C, relative humidity: 90 to 95%, left for 96 hours |
| 9. Temperature Cycle | Contact resistance: 80 mΩ or less (Note 3) Insulation resistance: 500 MΩ or more | Test in 5 cycles at temperatures of -55 > 15 to 35 > 85 > 15 to 35°C and at times of 30 mins. > 5 mins. > 30 mins. > 5 mins. |
| 10. Salt Spray | Contact resistance: 80 mΩ or less (Note 3) No corrosion (which can lead to losses in functionality.) | Leave for 48 hours with 5% concentrate salt water |
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use.
(Note 3) Includes the conductor resistance of the connected wire (L = 12 mm)
Product Materials/Processing
Receptacle
| Part Name | Materials | Finish | Standard |
|---|---|---|---|
| Insulator | Polyamide resin | Black | UL94V-0 |
| Contacts | Copper alloy | Contacts: gold plating Mounting section: pure tin plating | - |
| Metal shell (only type with shield) | FX15S: Nickel silver FX15SC: stainless steel | FX15S: - FX15SC: pure tin plating | - |
| Metal fittings (only type with shield) | Copper alloy | Selective gold flash plating | - |
Plug
| Part Name | Materials | Finish | Standard |
|---|---|---|---|
| Insulator | Polyamide resin | Black | UL94V-0 |
| Contacts | Copper alloy | Contacts: gold plating Wire connection: pure tin plating | - |
| Metal shell (only type with shield) | Nickel silver | - | - |
| Metal latch locks (only type with shield) | Stainless steel | - | - |
| Metal shell / integrated latch lock (micro coaxial cable type) | Stainless steel | Nickel plating | - |
Recommended Temperature Profile For This Product
The temperature profile is based on the following conditions. This may vary depending on conditions so be sure to check before implementing.
Applicable conditions
Test board - Dimensions: 40 × 30 × 1 (mm)
Reflow type - Material: glass epoxy
Solder composition: Sn-3 Ag-0.5 Cu (flux content: 10.5 wt%)
Metal mask thickness: 0.12 mm
(Note 1) This temperature profile is a recommended value.
(Note 2) The reflow process shall be performed two times or less.
(Note 3) The temperature profile may vary due to external conditions such as the type of cream solder, manufacturer, and board size as well as other material factors. Be sure to check all potential factors before use.
Cleaning Conditions
Organic solvent cleaning
| Solvent | Room Temperature Cleaning | Heated Cleaning |
|---|---|---|
| IPA (Isopropyl Alcohol) | ○ | ○ |
Water-based cleaning
When using water type cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Precautions for cleaning
Residual flux or cleaning agent on the connectors when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
| Part Number |
|---|
| FX15S-41P-0.5SD |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number Of Pins | Wiring Method | Plating of part touching terminal | Product Category | Specifications | Features | Conforming wire size (AWG) |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 4.10 | 1 Piece(s) | 4 Day(s) or more | 41 | Solder | Gold | Plug unit | Thin wire coaxial cable-compatible type with shell | NA | NA |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D/E/F | D/E/F | FX |
|---|---|---|---|---|---|
| Applicable pin/contact | Male | Connector Type | Cable Connection | Rated Current(A) | 0.5 |
| Allowable Voltage(V) | AC100 | Connection direction | Straight | Contact Pitch(mm) | 1 |
| Operating Temperature Range(°C) | -55 to +85 |
Please check the type/dimensions/specifications of the part FX15S-41P-0.5SD in the 1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series series.
Specification/Dimensions
-
Number Of Pins
-
Plating of part touching terminal
- Gold
- No terminal
-
Product Category
-
Specifications
- Shield reinforcement type with shell
- Thin wire coaxial cable-compatible type with shell
-
Features
- Fine wire-compatible products
- NA
-
Conforming wire size(AWG)
- 30 to 28
- 32 to 30
- NA
-
Wiring Method
- Solder
- Crimp
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| FX15S-31P-C |
| FX15S-41P-C |
| FX15S-51P-C |
| FX15SW-31P-C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number Of Pins | Wiring Method | Plating of part touching terminal | Product Category | Specifications | Features | Conforming wire size (AWG) |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 4.17 | 1 Piece(s) | 4 Day(s) or more | 31 | Crimp | No terminal | Plug | Shield reinforcement type with shell | NA | 32 to 30 | ||
SGD 2.88 | 1 Piece(s) | 4 Day(s) or more | 41 | Crimp | No terminal | Plug | Shield reinforcement type with shell | NA | 32 to 30 | ||
SGD 3.08 | 1 Piece(s) | 4 Day(s) or more | 51 | Crimp | No terminal | Plug | Shield reinforcement type with shell | NA | 32 to 30 | ||
SGD 2.76 | 1 Piece(s) | 4 Day(s) or more | 31 | Crimp | No terminal | Plug | Shield reinforcement type with shell | Fine wire-compatible products | 30 to 28 |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?