(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
1 mm Pitch, Circuit Board-to-Cable / FPC / Micro Coaxial Connector, DF19 Series【1-100 Pieces Per Package】
A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.
Japanese Only
Part Number
Configured Part Number is shown.
1 mm Pitch Thin-Type Connector for Board-to-Cable Connections, Board-to-FPC Connections, Board-to-Micro Coaxial Connections
DF19 Series list
Product Specifications
Product Standards
| Rating | Rated Current | AWG#28: 1 A AWG#30: 0.9 A AWG#32: 0.8 A AWG#36: 0.5 A FPC: 0.5 A Micro Coaxial Cable AWG#40: 0.3 A | Operating Temperature Range | -35 to 85°C (Note 1) | Storage temperature range | -10 to 60°C (Note 2) |
|---|---|---|---|---|---|---|
| Rated voltage | 100 V AC | Operating humidity range | 40 to 80% | Storage humidity range | 40 to 70% (Note 2) |
| Item | Standard | Conditions |
|---|---|---|
| 1. Insulation resistance | 500 M or more | Measure at 100 V DC. |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown | Energize at 300 V AC for 1 min. |
| 3. Contact resistance | 30 mΩ or less (FPC is 50 mΩ or less) | Measure at 100 mA |
| 4. Single unit insertion/extraction force | Min: 0.2 N (20 gf), Max: 3 N (300 gf) | Measure using a steel pin with a thickness of 0.2 ±0.005 |
| 5. Vibration resistance | There shall be no discontinuity for 1 μs or greater | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours |
| 6. Humidity resistance | Contact resistance: standard value or less, Insulation resistance: 500 MΩ or more | Leave at temperature 40 ±2°C and humidity 90 to 95% for 96 hours |
| 7. Temperature cycle | Contact resistance: standard value or less, Insulation resistance: 500 MΩ or more | (-55°C: 30 mins > 5 to 35°C: 10 mins > 85°C: 30 mins > 5 to 35°C: 10 mins) 5 cycles |
| 8. Durability (Mating / Un-mating) | Contact resistance: standard value or less | 30 mating / un-mating cycles |
| 9. Solder heat resistance | No melting of resin parts affecting performance | Reflow: At the recommended temperature profile, Manual soldering - Soldering iron temperature: 300°C for 3 seconds |
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use.
The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Materials/Processing
| Product | Part Name | Materials | Color/Finish | UL Standard |
|---|---|---|---|---|
| Pin header | Insulator | Polyamide resin | Black or beige | UL94V-0 |
| Contacts | Phosphor bronze | Selective gold plating | - | |
| Outer shell | Phosphor bronze | Partial tin plating or tin-copper plating | - | |
| Crimp case | Insulator | Polyamide resin | Beige | UL94V-0 |
| Outer shell | Stainless steel | Tin-copper plating | - | |
| Crimp contacts for sockets | Contacts | Phosphor bronze | Gold plating | - |
| FPC socket | Insulator | Polyamide resin | Beige | UL94V-0 |
| Contacts | Phosphor bronze | Selective gold plating | - | |
| Grounding board for FPC | Outer shell | Stainless steel | Tin-copper plating | - |
| Micro coaxial socket | Insulator | LCP resin | Beige | UL94V-0 |
| Contacts | Phosphor bronze | Selective gold plating | - | |
| Outer shell | Phosphor bronze | Tin plating | - | |
| Grounding plate for micro coaxial cable | Outer shell | Phosphor bronze | Tin plating | - |
Features of DF19 Series 1‑mm Pitch Connector for Board to Cable / FPC / Micro Coaxial Cable Connections
Multiple variations
Available with top-board type, offset type, reverse offset type, and vertical mounting type headers, allowing use in a wide variety of setups.
Top-board type
Offset type
Reverse offset type
Vertical mounting type
Each header includes 3 compatible types of socket (cable type, FPC type, micro coaxial type), providing more options for wire connections.
For FPC connections
For cable connections
For micro coaxial cable connections
Thin-Type Design
Cable, micro coaxial cable type: 1.5‑mm thickness (max. 1.6 mm) FPC type: Thin type design with a maximum thickness of just 1.7 mm.
Cable connections
FPC connections
Uniform External Dimensions
The outer dimensions of all sockets (cable type, FPC type, micro coaxial cable type) are the same
The outer dimensions of the 3 socket types have been made uniform, allowing use in a wide variety of setups.
Example of Product Usage
Can be used for cell phones, LCD equipment, DVC, DSC, PDA, camera modules and other small devices.
Product Usage Precautions
1. Recommended temperature profile
- The same conditions can be applied twice. However, the temperature between the 1st and 2nd cycles should be returned to room temperature
- The temperature profile indicates the board surface temperature at the point of contact with the connector lead part
- Although the grounding plate may become discolored, this will have no effect on product performance
Recommended temperature profile
2. Recommended manual solder conditions
Soldering iron temperature: 290°C ±10°C, Soldering time: within 3 seconds
3. Recommended screen thickness
0.15 mm
4. Board warpage
Max 0.03 mm in the connector center area, based on both connector edges
5. Cleaning conditions
Refer to "Wire-to-Board Connector Use Handbook"
6. Termination conditions
Refer to "Wire-to-Board Connector Use Handbook."
Because the crimped contacts are extremely small, crimping should be performed carefully while referring to the "Crimping Condition Sheet" and "Crimping Quality Standards"
7. Precautions
Be aware that twisting excessively during mating / un-mating may result in breakage
8. Handling
Refer to "Wire-to-Board Connector Use Handbook"
| Part Number |
|---|
| DF19-14S-1C |
| DF19-20S-1C |
| DF19G-8S-1C(05) |
| DF19G-14S-1C(05) |
| DF19G-20S-1C(05) |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Number Of Pins | Features |
|---|---|---|---|---|---|---|---|---|
SGD 1.18 | 1 Piece(s) | 3 Day(s) or more | - | 14 | NA | |||
SGD 25.73 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | - | 20 | NA | ||
SGD 0.65 | 1 Piece(s) | 3 Day(s) or more | - | 8 | With outer shell (EMI compatible) | |||
SGD 0.80 | 1 Piece(s) | 3 Day(s) or more | 10 | 14 | With outer shell (EMI compatible) | |||
SGD 64.14 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | - | 20 | With outer shell (EMI compatible) |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D/E/F | D/E/F | DF |
|---|---|---|---|---|---|
| Applicable pin/contact | Female | Connector Type | Cable Connection | Rated Current(A) | 1 |
| Allowable Voltage(V) | AC100 | Wiring Method | Crimp | Connection direction | Straight |
| Plating of part touching terminal | No terminal | Product Category | Socket | Specifications | For Crimping |
| Conforming wire size(AWG) | NA | Contact Pitch(mm) | 1 | Operating Temperature Range(°C) | -35 to +85 |
| Terminal pitch(mm) | 1 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?