(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
MELSEC-F Series Terminal Block
Option training, F series, terminal block
Part Number
Configured Part Number is shown.
Terminal Block FX-16E-TB, FX-16E-TB/UL Features
Input or output: 16 points (for connector > terminal block conversion)
The terminal block can be easily connected to a sequencer using a cable.
The customer may purchase an optional connection cable or fabricate a custom cable.
I/O wiring can be completed easily, which helps save on labor.
Terminal Block FX-16EX-A1-TB, FX-16EX-A1-TB/UL Features
Input: 16 points (for connector > terminal block conversion), AC input signal type.
FX-16EX-A1-TB and FX-16EX-A1-TB/UL Specifications
| Input Specifications | Connection Type | Terminal Block (M3.5 Screw) A connector is used to connect the terminal block to a sequencer. | |
|---|---|---|---|
| Input Type | AC Input | ||
| Input Signal Voltage | 100 to 120 V AC +10% -15% 50/60 Hz | ||
| Input Signal Current | 4.7 mA / 100 V AC, 50 Hz 6.2 mA / 110 V AC 60 Hz | ||
| Input Impedance | Approx. 21 kΩ / 50 Hz Approx. 18 kΩ / 60 Hz | ||
| Input Sensitivity | ON | 3.8 mA / 80 V AC or more | |
| OFF | 1.7 mA / 30 V AC or less | ||
| Response Time | 25 to 30 ms This response time does not include any response delay on the sequencer side. | ||
| Input Signal Format | Wet contact | ||
| Circuit Insulation | Opto-isolator Insulation | ||
| Input Operation Indicator | No input LED (However, a 24 V power supply LED indicator is available.) | ||
| Power Consumption | 1.2 W (48 mA, 24 V DC) When connected to an FX2N-16EX-C, at least "3.9 W (160 mA, 24 V DC)" is required. | ||
Input Circuit Configuration
FX-16EX-A1-TB and FX-16EX-A1-TB/UL
Terminal Block FX-16EYR-TB and FX-16EYR-ES-TB/UL Features
Output: 16 points (for connector > terminal block conversion) relay output type
Terminal Block FX-16EYR-TB, FX-16EYR-ES-TB/UL Specifications
| Output Specifications | Connection Type | Terminal Block (M3.5 Screw) A connector is used to connect the terminal block to a sequencer. | |
|---|---|---|---|
| Output Type | Relay | ||
| External Voltage | 250 V AC or less and 30 V DC or less | ||
| Maximum Load | Resistant Load | 2 A/point Make sure the total load current per common (4 points) is no more than 8 A. | |
| Inductive Load | 80 VA | ||
| Minimum Load | 5 V DC 2 mA (reference value) | ||
| Response Time | OFF > ON | Approx. 10 ms This response time excludes any response delay on the sequencer side. | |
| ON > OFF | Approx. 10 ms This response time excludes any response delay on the sequencer side. | ||
| Circuit Insulation | Mechanical Insulation | ||
| Operation Indication | An LED is lit when the relay coil is receiving power | ||
| Power Consumption | 1.92 W (80 mA, 24 V DC) | ||
Output Circuit Configuration
FX-16EYR-TB
FX-16EYR-ES-TB/UL
Terminal Block FX-16EYS-TB and FX-16EYS-ES-TB/UL Features
Output: 16 points (for connector > terminal block conversion) triac output type.
Terminal Block FX-16EYS-TB and FX-16EYS-ES-TB/UL Specifications
| Output Specifications | Connection Type | Terminal Block (M3.5 Screw) A connector is used to connect the terminal block to a sequencer. | |
|---|---|---|---|
| Output Type | Triac (SSR) | ||
| External Voltage | 85 to 242 V AC | ||
| Maximum Load | Resistant Load | 0.3 A / 1 point If a load subject to large rush current is switched ON/OFF at high frequency, make sure the mean-square current is no more than 0.2 A. Make sure the total load current per common (4 points) is no more than 0.8 A. | |
| Inductive Load | 15 V A / 100 V AC 36 V A / 240 V AC | ||
| Minimum Load | 0.4 VA / 100 V AC 1.6 VA / 200 V AC | ||
| Leakage Current When Open | 1 mA / 100 V AC 2 mA / 200 V AC | ||
| Response Time | OFF > ON | 2 ms or less This excludes any response delay on the sequencer side. | |
| ON > OFF | 12 ms or less This excludes any response delay on the sequencer side. | ||
| Circuit Insulation | Opto-isolator Insulation | ||
| Operation Indication | An LED is lit when the photo-thyristor is receiving power | ||
| Power Consumption | 2.7 W (112 mA 24 V DC) | ||
Output Circuit Configuration
FX-16EYS-TB
FX-16EYS-ES-TB/UL
Terminal Block FX-16EYT-ES-TB/UL, FX-16EYT-ESS-TB/UL and FX-16EYT-TB Features
Output: 16 points (for connector > terminal block conversion), transistor output type
Output type: transistor/sink output (FX-16EYT-ES-TB/UL, FX-16EYT-TB), transistor/source output (FX-16EYT-ESS-TB/UL)
Terminal Block FX-16EYT-ES-TB/UL, FX-16EYT-ESS-TB/UL and FX-16EYT-TB Specifications
| Output Specifications | Connection Type | Terminal Block (M3.5 Screw) A connector is used to connect the terminal block to a sequencer. | |
|---|---|---|---|
| External Voltage | 5 to 30 V DC | ||
| Maximum Load | Resistant Load | 0.5 A / 1 point Make sure the total load current per common (4 points) is no more than 0.8 A. | |
| Inductive Load | 12 W / 24 V DC | ||
| Leakage Current When Open | 0.1 mA / 30 V DC | ||
| Response Time | OFF > ON | 0.2 ms or less / 24 V DC This response time excludes any response delay on the sequencer side. | |
| ON > OFF | 1.5 ms or less / 24 V DC This response time excludes any response delay on the sequencer side. | ||
| Output Element ON Voltage | 1.5 V | ||
| Circuit Insulation | Opto-isolator Insulation | ||
| Operation Indication | An LED is lit when the opto-isolator is receiving power | ||
| Power Consumption | 2.7 W (112 mA 24 V DC) | ||
Output Circuit Configuration
FX-16EYT-ES-TB/UL
FX-16EYT-ESS-TB/UL
FX-16EYT-TB
Terminal Block FX-16EYT-H-TB Features
Output: 16 points (for connector > terminal block conversion) transistor output large-current type
Terminal Block FX-16EYT-H-TB Specifications
| Output Specifications | Connection Type | Terminal Block (M3.5 Screw) A connector is used to connect the terminal block to a sequencer. | |
|---|---|---|---|
| Output Type | Transistor / sink output | ||
| External Voltage | 5 to 30 V DC | ||
| Maximum Load | Resistant Load | 1 A / 1 point Make sure the total load current per common (4 points) is no more than 3 A. | |
| Inductive Load | 24 W / 24 V DC | ||
| Leakage Current When Open | 0.1 mA / 30 V DC | ||
| Response Time | OFF > ON | 10 ms or less | |
| ON > OFF | 10 ms or less | ||
| Output Element ON Voltage | 1.5 V | ||
| Circuit Insulation | Opto-isolator Insulation | ||
| Operation Indication | An LED is lit when the opto-isolator is receiving power | ||
| Power Consumption | 2.7 W (112 mA 24 V DC) | ||
Output Circuit Configuration
FX-16EYT-H-TB
Terminal Block FX-32E-TB and FX-32E-TB/UL Features
Input or output: 32 points (can be divided into 16 input points / 16 output points) (for connector > terminal block conversion)
| Part Number |
|---|
| FX-16E-TB |
| FX-16E-TB/UL |
| FX-16EX-A1-TB |
| FX-16EX-A1-TB/UL |
| FX-16EYR-TB |
| FX-16EYS-TB |
| FX-16EYT-TB |
| FX-32E-TB |
| FX-32E-TB/UL |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Series | Connector 1 | Number of Inputs/Outputs | Input/output type | other specifications |
|---|---|---|---|---|---|---|---|---|---|
SGD 62.30 | 1 Piece(s) | Quote | FX1N / FX1NC / FX2N / FX2NC / FX3G / FX3U / FX3UC | - | 16 points | For Converting Connectors to Terminal Blocks | A 16 point input/output type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 62.30 | 1 Piece(s) | Quote | FX1N / FX2N / FX2NC / FX3G / FX3U / FX3UC | - | 16 points | For Converting Connectors to Terminal Blocks | A 16 point input/output type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 378.80 | 1 Piece(s) | Quote | FX1N / FX1NC / FX2N / FX2NC / FX3G / FX3U / FX3UC | Terminal Block (M3.5 Screw) | Input: 16 Points | AC input | A 16 point AC input signal type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 378.80 | 1 Piece(s) | Quote | FX1N / FX2N / FX2NC / FX3G / FX3U | Terminal Block (M3.5 Screw) | Input: 16 Points | AC input | A 16 point AC input signal type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 275.00 | 1 Piece(s) | Quote | FX1N / FX1NC / FX2N / FX2NC / FX3G / FX3U / FX3UC | Terminal Block (M3.5 Screw) | Output: 16 Points | Relay Output | A 16 point relay output type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 334.20 | 1 Piece(s) | Quote | FX1N / FX1NC / FX2N / FX2NC / FX3G / FX3U / FX3UC | Terminal Block (M3.5 Screw) | Output: 16 Points | Triac output | A 16 point TRIAC output type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 275.00 | 1 Piece(s) | Quote | FX1N / FX1NC / FX2N / FX2NC / FX3G / FX3U / FX3UC | Terminal Block (M3.5 Screw) | Output: 16 Points | Transistor / sync output | A 16 point transistor output type for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 115.20 | 1 Piece(s) | Quote | FX1N / FX1NC / FX2N / FX2NC / FX3G / FX3U / FX3UC | - | 32 points | For Converting Connectors to Terminal Blocks | A 32 point input/output type (can be split into 16 point input and 16 point output) for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. | ||
SGD 115.20 | 1 Piece(s) | Quote | FX1N / FX2N / FX2NC / FX3G / FX3U / FX3UC | - | 32 points | For Converting Connectors to Terminal Blocks | A 32 point input/output type (can be split into 16 point input and 16 point output) for connector to terminal block conversion. The sequencer and the terminal block can be connected simply by a cable. |
Loading...
Specification/Dimensions
-
Applicable Series
-
Connector 1
- Terminal Block (M3.5 Screw)
-
Number of Inputs/Outputs
- 16 points
- Input: 16 Points
- Output: 16 Points
- 32 points
-
Input/output type
- AC input
- For Converting Connectors to Terminal Blocks
- Relay Output
- Transistor / sync output
- Triac output
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?