(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
MELSEC-F Series High Speed Counter
A high speed counter for the micro sequencer MELSEC-F series
Part Number
Configured Part Number is shown.
MELSEC-F Series High-Speed Counter Specifications
FX3U-2HC
FX3U-2HC image
- Each unit has two channels of high-speed input terminals and up to 200 kHz high-speed counting is possible. 2-phase counter can count multiplication by 1, by 2, by 4.
- Open collector (5, 12 or 24 V DC) or differential line driver (equivalent to AM26C31) output type encoder or sensor can be connected to the input. 16 or 32-bit counter mode can be selected, and multiplication can be specified to the 2-phase counter.
- The input/output signal connections are made through connectors. Connectors "FX-I/O-CON2-S and FX-I/O-CON2-SA" can be used. (Wiring cable must be provided by customer.)
FX3U-2HC Performance Specifications
| Number of Input Channels | 2 ch | |
|---|---|---|
| Input Format | Open collector, differential line driver (differential line driver output type encoder is connected to the 5 V terminal) | |
| Input Voltage | Selected from 5, 12 or 24 V DC depending on the connection terminal | |
| Maximum Response Frequency | 1-Phase 1 Input | 200 kHz or less |
| 1-Phase 2 Inputs | 200 kHz or less | |
| 2-Phase Input | 200 kHz or less (multiplied by 1), 100 kHz or less (multiplied by 2), 50 kHz or less (multiplied by 4) | |
| Count Range | At 32-bit specification: -2,147,483,648 to +2,147,483,647 At 16-bit specification: 0 to 65,535 (upper limit can be specified with BFM #3, #2, #43, #42) | |
| Count Mode | Automatic up/down (The counting direction of the 1-phase 1 input counter is determined by the following command) [H/W up/down] Counts up/down by OFF/ON of the A-phase input terminal. [S/W up/down] Counts up/down by the current value (K0/K1) of BFM #1, #41. | |
| Matching Output (Comparison) | When the current value of the counter and the comparison setting match, the comparison output is set (ON) within 30 μs, and is cleared (OFF) within 100 μs by the reset command. | |
| Output Format | Open collector output, 2 points, 5 to 24 V DC at 0.5 A each | |
| Display (LED) | øA, øB, DIS, PRE, YH1, YH2, POWER, UP, DOWN | |
| Number of Occupied Inputs/Outputs | 8 points (either input or output can be considered) | |
| Applicable Sequencers | FX5U, FX5UC, FX3U (V2.20 or later), FX3UC (V2.20 or later) "Connection to FX5U or FX5U CPU unit" Connection to FX5U or FX5UC requires FX5-CNV-BUS or FX5-CNV-BUSC. Select either one according to the system configuration. "Connection to connector type sequencer" Connection to FX3UC requires either FX2NC-CNV-IF or FX3UC-1PS-5V. | |
| Weight | 0.2 kg | |
| Power Supply Specifications | ||
| Power Supply | 5 V DC, 245 mA (internal power supply from sequencer) | |
FX3U-2HC General Specifications
| Ambient Temperature | 0 to 55°C: When operating, -25 to 75°C: When stored | ||
|---|---|---|---|
| Relative Humidity | 5 to 95% RH (non-condensing): When operating | ||
| Vibration Resistance | When Mounting to DIN Rail | Frequency: 10 to 57 Hz | Single amplitude: 0.035 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) |
| Frequency: 57 to 150 Hz | Acceleration: 4.9 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| When Mounting Directly | Frequency: 10 to 57 Hz | Single amplitude: 0.075 mm 10 times in each direction of X, Y and Z (total of 80 minutes each) | |
| Frequency: 57 to 150 Hz | Acceleration: 9.8 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| Impact Resistant | 147 m/s2, for a duration of 11 ms, 3 times in each direction of X, Y and Z with a half-sine pulse | ||
| Noise Resistance | Achieved through a noise simulator with a noise voltage of 1,000 Vp-p, noise width of 1 μs, the rise time of 1 ns, and frequency of 30 to 100 Hz | ||
| Withstand Voltage | Between all terminals batch and earth terminal: 500 V AC for 1 minute | ||
| Insulation Resistance | Between all terminals batch and earth terminal: 5 MΩ or more with 500 V DC ohmmeter | ||
| Grounding | Class D grounding (ground resistance: 100 Ω or less) "Shared grounding with a high-power system is not allowed" Use dedicated or shared ground. | ||
| Operating Atmosphere | There shall be no corrosion gas or flammable gas and not much conductive dust | ||
| Altitude of Use | 2,000 m or less Cannot be used in environments pressurized above atmospheric pressure. This may cause failure. | ||
| Part Number |
|---|
| FX3U-2HC |
| FX3U-4HSX-ADP |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number of Channels (ch) | Count Input Format | Maximum Response Frequency (1 Phase, 1 Input) | Maximum Response Frequency (1 Phase, 2 Input) | Maximum Response Frequency (2 Phase Input) |
|---|---|---|---|---|---|---|---|---|---|
SGD 601.60 | 1 Piece(s) | 20 Day(s) | 2 | Open Collector Differential Line Driver | 200 kHz or Less | 200 kHz or Less | 200 kHz or Less (1 Multiplication), 100 kHz or Less (2 Multiplication), 50 kHz or Less (4 Multiplication) | ||
SGD 515.40 | 1 Piece(s) | 91 Day(s) | 4 | Differential Line Receiver | 200 kHz or less (according to sequence program) | 200 kHz or less (according to sequence program) | 100kHz or less (according to sequence program) |
Loading...
Basic Information
| Type | Counter |
|---|
Specification/Dimensions
-
Number of Channels(ch)
- 2
- 4
-
Count Input Format
- Differential Line Receiver
- Open Collector Differential Line Driver
-
Maximum Response Frequency (1 Phase, 1 Input)
- 200 kHz or Less
- 200 kHz or less (according to sequence program)
-
Maximum Response Frequency (1 Phase, 2 Input)
- 200 kHz or Less
- 200 kHz or less (according to sequence program)
-
Maximum Response Frequency (2 Phase Input)
- 100kHz or less (according to sequence program)
- 200 kHz or Less (1 Multiplication), 100 kHz or Less (2 Multiplication), 50 kHz or Less (4 Multiplication)
Days to Ship
-
- All
- 20 Day(s) or Less
- 91 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?