(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
MELSEC-F Series Positioning Contro (SSCNET) (Part Numbers)
SSCNET III compatible positioning block FX3U-20SSC-H.
[Features]
・ By supporting SSCNET III, positioning control with excellent cost performance, high speed, high accuracy, and excellent noise resistance has been realized
・ Various functions that are easier to use, such as labor-saving wiring using optical fiber cables and real-time monitoring of servo information can support various positioning controls
・ It supports high resolution encoders of MR-J3 and MR-J4 servo motors, and pulse rate setting of 262,144 PLS/rev is possible
・ It is effective for high accuracy control and low speed stability
・ High-speed serial communication with high synchronization of SSCNET III has realized highly accurate control between 2 axes
・ You can make parameter setting and table operation setting easily by using the setting software
・ Long distance connection is possible up to 50 m between servo stations
・ The table operation function contributes to significant reduction in program development labor-hours
・ Speed change and target position change are possible during positioning
・ Override function (It can change the operating speed easily to the specified rate)
・ Various origin return modes (DOG type / data set type / stopper type)
・ 1 PLS command function enables fine inching
・ It has a constant change function of torque limit value
・ Manual pulsar input up to 100 kHz
Part Number
Configured Part Number is shown.
FX3U-20SSC-H
Positioning Block FX3U-20SSC-H Features
The SSCNET III-compatible block allows to easily build a high-speed, high-precision positioning system in combination with MR-J3/MR-J4 Servo Motors.
Up to 2 servo amplifiers can be connected using optical fiber cables.
The setup software makes parameter setting and table operation setup easy.
Positioning Block FX3U-20SSC-H Drawing
FX3U-20SSC-H
FX2NC-100MPCB Model Power Cable included.
Can be mounted on a 35-mm wide DIN rail.
Positioning Block FX3U-20SSC-H Performance Specifications
| Number of Control Axis | 2 axes (independent/simultaneous) | |
|---|---|---|
| Interpolation Function | 2-axis linear interpolation, circular interpolation | |
| Pulse Output System | SSCNETIII | |
| Maximum Frequency | 50 MHz | |
| Acceleration/Deceleration Processing | Automatic trapezoidal acceleration/deceleration, approximate sigmoid acceleration/deceleration | |
| Single Control Unit | Pulse, μm, 10-4 inch, mdeg | |
| Positioning Range | -2,147,483,648 to +2,147,483,647 pulses -2,147,483,648 to +2,147,483,647 [× (position data multiplier) μm] -2,147,483,648 to +2,147,483,647 [× (position data multiplier) ×10-4 inches] -2,147,483,648 to +2,147,483,647 [× (position data multiplier) mdeg] The position data multiplier can be set to ×1, ×10, ×102or ×103using a parameter. A desired value can be set in a range of -2,147,483,648 to +2,147,483,647 in equivalent pulses. | |
| Programming Language | Sequence program (BFM can be specified directly using an operand of a FROM/TO command or other applied command.) The table operation setup data (table information) can be set by FX Configurator-FP model setting / monitoring tool. | |
| Position Data | 1 point (set by the sequence program) If table operation is performed, 300 points can be set for each of the X-axis, Y-axis and XY-axis (in a table). | |
| Manual Pulsar Connection | Connectable (Differential line driver) | |
| Absolute Position Detection (ABS Current Position Read) | Set by parameters | |
| Number of Occupied Input/Output | 8 sequencer input/output points are occupied (can be counted either on the input side or output side) | |
| Applicable Sequencer | FX3U, FX3UC "Connecting to a connector-type sequencer" Connecting to an FX3UC requires an FX2NC-CNV-IF or FX3UC-1PS-5V. | |
| Weight | 0.3 kg | |
| Power Supply Specifications | ||
| Power Supply Voltage | 5 V DC, 100 mA (internal power supply from sequencer) 24 V DC +20% -15%, ripple (p-p) within 5% (external power supply) | |
| Allowable Momentary Power Outage Duration | Operation will continue following a momentary power failure of 5 ms or less | |
| Power Consumption | 5 W (220 mA / 24 V DC) | |
| Power Supply Fuse | 1 A | |
| Input Specifications | ||
| Control Input | Control input: 2 points per axis (DOG, START) Interrupt input: 2 points per axis (INT0, INT1) Manual pulsar input: 1 point per axis (øA, øB) | |
| Input Signal Voltage | DOG, START, INT0, INT1 | 24 V DC +20% -15% |
| øA, øB | 3 V DC to 5.25 V DC | |
| Input Signal Format | DOG, START, INT0, INT1 | Dry contact input For sink input: NPN open collector transistor For source input: PNP open collector transistor |
| øA, øB | Differential line driver (AM26LS31 or equivalent) | |
| Input Signal Current | DOG, START, INT0, INT1 | 7.0 mA ±1 mA |
| øA, øB | 3.0 mA to 8.5 mA | |
| Input ON Sensitivity | DOG, START, INT0, INT1 | 4.5 mA or more |
| øA, øB | 3.0 mA or more | |
| Input OFF Sensitivity | DOG, START, INT0, INT1 | 1.5 mA or less |
| øA, øB | 0.5 mA or less | |
| Input Loading Speed | DOG, START, INT0, INT1 | Hardware filter 1 ms or less |
| øA, øB | 2-phase pulse 100 kHz or less (duty 50%) | |
| Circuit Insulation | Opto-isolator insulation | |
| Operation Display | The LED lights up when the input is ON | |
Positioning Block FX3U-20SSC-H General Specifications
| Ambient Temperature | 0 to 55°C: When operating, -25 to 75°C: When saving | ||
|---|---|---|---|
| Relative Humidity | 5 to 95% RH (no condensation): when operating | ||
| Vibration Resistance | When Mounting to DIN Rail | Frequency: 10 to 57 Hz | Single amplitude: 0.035 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) |
| Frequency: 57 to 150 Hz | Acceleration: 4.9 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| When Mounting Directly | Frequency: 10 to 57 Hz | Single amplitude: 0.075 mm, 10 times in each direction of X, Y and Z (total of 80 minutes each) | |
| Frequency: 57 to 150 Hz | Acceleration: 9.8 m/s2 10 times in each direction of X, Y and Z (total of 80 minutes each) | ||
| Impact Resistant | 147 m/s2, for a duration of 11 ms, 3 times in each direction of X, Y and Z with a half-sine pulse | ||
| Noise Resistance | Achieved through a noise simulator with a noise voltage of 1,000 Vp-p, noise width of 1 μs, the rise time of 1 ns and frequency of 30 to 100 Hz | ||
| Dielectric Strength | Between all terminals and earth terminal: 500 V AC for 1 minute | ||
| Insulation Resistance | Between all terminals and earth terminal: 5 MΩ or more at 500 V DC on an ohmmeter | ||
| Operating Atmosphere | There shall be no corrosive gas or flammable gas and not much conductive dust | ||
| Altitude of Use | 2,000 m or lower Cannot be used in environments pressurized above atmospheric pressure. Doing so may cause failure. | ||
| Part Number |
|---|
| FX3U-20SSC-H |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
SGD 698.00 | 1 Piece(s) | 91 Day(s) |
Loading...
Basic Information
| Number of Control Axis | (Independent/Simultaneous) 2 shafts | Representative Standard | CE / UL | Applicable sequencer | FX3U / FX3UC |
|---|---|---|---|---|---|
| Single Control Unit | pulse, μm, 10^-4 inch, mdeg | Number of Control Axis(Axis) | (Independent/Simultaneous) 2 shafts | Pulse Output System | SSCNETIII |
Please check the type/dimensions/specifications of the part FX3U-20SSC-H in the MELSEC-F Series Positioning Contro (SSCNET) series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?