(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
2-Port Air Operated Valve, Single Unit, Compact Cylinder Valve NAB/NAB□V Series
Air-Operated 2-Port Valve, Single Unit, Compact Cylinder Valve NAB/NAB□V Series.
[Features]
・ NC (normally closed) type, NO (normally open) type, double acting type
·Connection port size: Rc1/4, Rc3/8
·Operating fluid: Air, water, gas, and low vacuum
Part Number
Configured Part Number is shown.
Drawing
●NAB※-8·10-02·B2·D2·E2/NAB※V-8·10-02·B2·D2·E2
●NAB※-8·10/NAB※V-8·10
● Mounting Plate
NAB※-8·10-※※ B
NAB※V-8·10-※※ B
● Quick-connect fitting, straight type
NAB※-8·10-02·B2·D2·E2
NAB※V-8·10-02·B2·D2·E2
● Quick-connect fitting, L type
NAB※-8·10-02·B2·D2·E2
NAB※V-8·10-02·B2·D2·E2
* The mounting plate is not sold separately.
Product Specifications
JIS symbol
●NAB※ (※1)
NC (normally closed) type
NO (normally open) type
Double-acting operation type
*1: When the constantly pressurized side is connected to the port B, the durability will be inferior to that when it is connected to the port A.
●NAB※V
NC (normally closed) type
NO (normally open) type
Double-acting operation type
Product Specifications
- Materials: Steel, galvanized
| Items | NAB※ | NAB※V | ||||
|---|---|---|---|---|---|---|
| NAB1 | NAB2 | NAB3 | NAB1V | NAB2V | NAB3V | |
| Operating method | NC (normally closed) type | NO (normally open) type | Double-acting operation type | NC (normally closed) type | NO (normally open) type | Double-acting operation type |
| Operating fluid | Air, water, and gas | Low vacuum (air, water) | ||||
| Fluid viscosity (mm^2/s) | 500 or less | |||||
| Operating pressure | 0 to 0.7 MPa | 1.3 × 10^2 to 7 × 10^5 Pa (abs) | ||||
| Pressure resistance (with water pressure) (MPa) | 1.4 | |||||
| Fluid temperature (°C) | -10 to +60 (No freezing) (*2) | |||||
| Ambient temperature (°C) | -10 to +60 | |||||
| Valve Seat Leakage | 0.12 cm^3 / min or less (with pneumatic pressure) | 1.33 × 10^-3 Pa·m^3 / sHe or less | ||||
| Connection port size | Rc1/4, Rc3/8 | |||||
| Orifice Diameter (mm) | 7 | |||||
| Cv Factor | 1.2 | |||||
| C [dm^3 / (s·bar)] | 5.2 (※3) | |||||
| b | 0.3 | |||||
| Weight (kg) | 0.28 (Note that it varies depending on the type.) | |||||
| Mounting orientation | Swivel | |||||
| Pilot fluid | Air | |||||
| Pilot pressure (MPa) | 0.25 to 0.7 | (※4) | 0.25 to 0.7 | (※4) | ||
| Pilot connection size | Rc1/8 (Note that it varies depending on the type.) | |||||
*2: The same applies to the seal material of nitrile rubber and fluoroelastomer.
*3: The conversion formula between the effective cross-sectional area S and the sonic conductance C is S ≈ 5.0 × C.
*4: Please refer to the following for the pilot pressure of NO type and double-acting type.
■Pilot pressure
Please use the pilot pressure within the specified range. In particular, set the pilot pressures for the NAB series of the NO type and double-acting operation type as shown in the graph below.
If it is used below the set range of the graph, a seal failure will occur, and if it is used above the set range, the durability will decrease.
If the pilot pressure cannot be controlled, it is recommended to select the model number of the NC type.
NAB2/2 V series
NAB3/3 V series
Standard Table
Quick-connect fitting, straight type
| Pilot Port Connection Port Diameter | A |
|---|---|
| C4 | 7 |
| C6 | 8.5 |
| C18 | 3.5 |
Quick-connect fitting, L type
| Pilot Port Connection Port Diameter | B | C | D | E | F |
|---|---|---|---|---|---|
| CL4 | 6.5 | 11.5 | 14 | 17 | 22 |
| CL6 | 7.5 | 12.5 | 16 | 18 | 23 |
| CL18 | 4 | 7 | 8.5 | 11 | 14 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Fluid | Plumbing Thread Nominal | Switching Type | Material of Body | Seal Material | Mounting Plate |
|---|---|---|---|---|---|---|---|---|---|---|
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Closed] 2-Port Normally Closed | Brass | Fluoroelastomer | Available | ||
SGD 118.24 | 1 Piece(s) | 9 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Nitrile rubber | NA | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Fluoroelastomer | NA | ||
SGD 127.86 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Fluoroelastomer | Available | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Brass | Fluoroelastomer | NA | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Brass | Fluoroelastomer | Available | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Nitrile rubber | NA | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Nitrile rubber | Available | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Fluoroelastomer | NA | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Closed] 2-Port Normally Closed | Stainless steel | Fluoroelastomer | Available | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Open] 3-Port Normally Open | Brass | Fluoroelastomer | NA | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Open] 3-Port Normally Open | Brass | Fluoroelastomer | Available | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Nitrile rubber | NA | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Nitrile rubber | Available | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Fluoroelastomer | NA | ||
SGD 127.86 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Fluoroelastomer | Available | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Open] 3-Port Normally Open | Brass | Fluoroelastomer | NA | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Open] 3-Port Normally Open | Brass | Fluoroelastomer | Available | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Nitrile rubber | NA | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Nitrile rubber | Available | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Normally Open] 3-Port Normally Open | Stainless steel | Fluoroelastomer | NA | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Others] Double Action Type | Brass | Fluoroelastomer | NA | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Others] Double Action Type | Brass | Fluoroelastomer | Available | ||
SGD 118.24 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Others] Double Action Type | Stainless steel | Nitrile rubber | NA | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Air / Water / Gas | 3/8 | [Others] Double Action Type | Stainless steel | Fluoroelastomer | NA | ||
SGD 73.98 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Others] Double Action Type | Brass | Fluoroelastomer | NA | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Others] Double Action Type | Stainless steel | Fluoroelastomer | NA | ||
SGD 125.93 | 1 Piece(s) | 15 Day(s) or more | Vacuum | 3/8 | [Others] Double Action Type | Stainless steel | Fluoroelastomer | Available |
Loading...
Basic Information
| Type | Air Operated Type | Operating Environment | Standard | Connection Type | Rc |
|---|---|---|---|---|---|
| Pilot Connection Port Diameter | Rc1/8 |
Specification/Dimensions
-
Applicable Fluid
- Air
- Water
- Vacuum
- Gas
-
Switching Type
- Normally Closed
- Normally Open
- Others
- Normally Closed
-
Material of Body
- Brass
- Stainless steel
-
Seal Material
- Fluoroelastomer
- Nitrile rubber
-
Mounting Plate
- Available
- NA
-
type
- NAB□
- NAB□V
-
Plumbing Thread Nominal
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Day(s) or Less
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?