(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Air Cooled Aftercooler HAA Series
This air-cooled aftercooler does not require cooling equipment, and maintenance is easy without concerns about water supply cut-off or freezing.
[Features]
· Cools high temperature compressed air from a compressor down to 40°C or less and removes moisture from the air.
· Compact size and light weight.
· Uses minimal floor space.
· Built-in drain separator.
· Dust-protecting filter optional.
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - See catalog for specification details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Part Number
Configured Part Number is shown.
Air Cooled Aftercooler HAA Series Features
HAA15 external appearance
HAA7 external appearance
Working Principle
Specifications
| Model | HAA7 | HAA15 | HAA22 | HAA37 | ||||
|---|---|---|---|---|---|---|---|---|
| Rated conditions | Air flow capacity L/min (ANR)*1 | 1,000 | 2,200 | 3,300 | 5,700 | |||
| Inlet air temperature (°C) | 70 | |||||||
| Inlet air pressure (MPa) | 0.7 | |||||||
| Ambient temperature (°C) | 32 | |||||||
| Outlet air temperature (°C) | 40 | |||||||
| Operating range | Applicable fluid | Compressed Air | ||||||
| Inlet air temperature (°C) | 5 to 100 | |||||||
| Inlet air pressure (MPa) | 0.05 to 1.0 (With auto drain: 0.15 to 1.0) | 0.05 to 0.97 (With auto drain: 0.15 to 0.97) | ||||||
| Ambient temperature (°C) | 2 to 50 | |||||||
| Installation location | Indoors | |||||||
| Electric specifications | Power supply | Single-phase 100 V AC (50/60 Hz) | Single-phase 200 V AC (50/60 Hz) | Single-phase 100 V AC (50/60 Hz) | Three-phase 200 V AC (50/60 Hz) | Three-phase 200 V AC (50/60 Hz) | Three-phase 200 V AC (50/60 Hz) | |
| Power consumption (W) | 50 Hz | 55 | 58 | 55 | 50 | 90 | 204 | |
| 60 Hz | 58 | 65 | 65 | 60 | 130 | 244 | ||
| Current (A) | 50 Hz | 0.8 | 0.43 | 0.8 | 0.4 | 0.4 | 2.0 | |
| 60 Hz | 0.81 | 0.46 | 0.9 | 0.35 | 0.45 | 2.0 | ||
| Proof pressure (MPa) | 1.5 | |||||||
| Cooling fan diameter (mm) | 255 | 300 | 400 | 350 × 2 pcs. | ||||
| Cooler | Aluminum plate tube with fins | |||||||
| Port size for inlet/outlet air | Rp3/4 socket | 1B union | 1 1/2 B union | |||||
| Port size for drain outlet piping (With auto drain) | Rc 3/8 (Rc 3/8) | Rc 1/2 (Rc 3/8) | ||||||
| Weight (kg) | 18 | 24 | 36 | 55 | ||||
| Coating color | Munsell N-8 (white), Munsell 2.5PB5/8.5 (blue) | |||||||
| Applicable compressor (kW)*2 | 7.5 | 15 | 22 | 37 | ||||
| Standard equipment | Thermometer for outlet air temperature (1 pc.) | - | ● | ● | ● | |||
| Accessories*3 | Drain valve (1 pc.) | 3/8B | 1/2B | |||||
| Union (2 pcs.) | - | 1B | 1 1/2 B | |||||
*1: ANR is the value at 20°C, atmospheric pressure and relative humidity 65%.
*2: The applicable compressor is based on the discharge rate and discharge temperature (70°C) of a screw-type compressor.
*3: Accessories should be mounted by the user.
Dimensions
(Unit: mm)
Dimensions: HAA7
(Unit: mm)
HAA15-22 dimensions
(Unit: mm)
HAA37 dimensions
(Unit: mm)
| Model | Piping connection port diameter | A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | R | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HAA15 | 1B union | 460 | 394 | 33 | 70 | 59 | 485 | 428 | 320 | 150 | 150 | 320 | 70 | 58 | 200 | 480 | 220 | 225 |
| HAA22 | 1 1/2B union | 588 | 484 | 52 | 70 | 60 | 580 | 505 | 333 | 150 | 150 | 400 | 94 | 65 | 200 | 610 | 220 | 238 |
How to Calculate Outlet Air Temperature
The outlet air temperature can be calculated by the inlet air temperature, ambient temperature and air flow capacity using the following procedure.
(Example) Inlet air temperature: 100°C, Ambient temperature: 20°C, Air flow capacity: 2,000 L/min (ANR), Air pressure:
0.7 MPa, Model: HAA22-14
Correction factor by ambient temperature
- 1. Use an outlet air temperature of 38.5°C from the Outlet Air Temperature table. In this case, use correction factor line A.
- 2. Next, use the correction factor by ambient temperature chart to obtain a correction factor of 1.35 at the ambient temperature of 20°C on line A.
- 3. Divide 38.5°C (from step 1) by 1.35 (from step 2) to obtain the outlet air temperature. Outlet air temperature = 38.5 ÷ 1.35 = 28.5°C
Outlet Air Temperature
| Model | Correction factor line | Air flow (L/min [ANR]) | Inlet air temperature | ||
|---|---|---|---|---|---|
| 50°C | 70°C | 100°C | |||
| HAA7 | (A) | 500 | 34.5 | 35 | 35.5 |
| (B) | 1,000 | 38 | 40 | 42.5 | |
| (C) | 1,500 | 40 | 44 | 47.5 | |
| HAA15 | (A) | 1,000 | 33 | 35.5 | 36 |
| (B) | 2,200 | 36.5 | 40 | 42.5 | |
| (C) | 3,000 | 38 | 42 | 44 | |
| HAA22 | (A) | 2,000 | 34 | 37 | 38.5 |
| (B) | 3,300 | 36 | 40 | 42.5 | |
| (C) | 4,000 | 37 | 41.5 | 45 | |
| HAA37 | (A) | 4,000 | 34 | 38 | 39 |
| (B) | 5,700 | 35 | 40 | 43 | |
| (C) | 7,000 | 36 | 42 | 45 | |
Conditions:
- Air pressure 0.7 MPa, ambient temperature 32°C.
- An inlet air temperature of 50°C is saturated air. At 70°C or more, it is humid air with a dew point of 67°C.
Precautions
Caution on Design
Caution
- 1. Do not obstruct the aftercooler's vent inlet and outlet, and be sure to install the aftercooler more than 20 cm away from the walls and other equipment.
- 2. Install the aftercooler in a location that facilitates maintenance and inspection.
- 3. Install the aftercooler in a location with minimal vibrations.
- 4. Because the surrounding temperature increases due to the exhaust heat from the aftercooler, ventilate the area with an exhaust fan, etc.
- 5. The air-cooled type aftercooler cannot be used in a location where the temperature exceeds 50°C. To use in such a location, use a water-cooled type aftercooler instead.
- 6. The maximum allowable temperature of the inlet air is 100°C.
If the inlet air exceeds this temperature, select an appropriate water-cooled type aftercooler. - 7. Prevent fins from becoming clogged. Do not use this aftercooler in an area that has viscous dust (electrostatic paint powder, oily particles, etc.). If it must be used under such conditions due to unavoidable circumstances, please contact the manufacturer support center beforehand.
Mounting
Caution
- 1. Do not interchange the connections to the compressed air inlet and the compressed air outlet. When tightening the air inlet and outlet piping, make sure to use a pipe wrench to hold the inlet and outlet nozzles of the product.
- 2. Connect a drain pipe because drainage is created when the compressed air is cooled.
- 3. The drain pipe must have a minimum pipe bore of 10 mm and a maximum length of 5 m (when installing an optional auto-drain).
Maintenance
If the aftercooler is equipped with an auto drain, the following mounting frame is necessary. Mounting frame (Option: Refer to p. 11 Accessories)
Caution
- 1. Inspect the cooler at least once a week, and clean it to prevent it from becoming obstructed.
- 2. Discharge the drainage on a regular basis in accordance with the amount of drainage that is created. (The optional auto drain is recommended for automatic discharge.)
- *See the manufacturer's catalog for other specifications, etc.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Air compressor size (screw type) (KW) | Piping connection port diameter | Power supply voltage (V) | Auto drain | Filter for dust intrusion prevention | Frame | Terminal |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 1,941.57 | 1 Piece(s) | 32 Day(s) | 7.5 | Rp3/4 | Single-phase 100 | None | None | None | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | None | None | None | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | With auto drain | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | With auto drain | With dust-protecting filter | With mounting frame | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | With auto drain | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | With auto drain | None | With mounting frame | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | None | With dust-protecting filter | None | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | None | With dust-protecting filter | None | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | None | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | None | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 100 | None | None | With mounting frame | With terminal | ||
SGD 1,941.57 | 1 Piece(s) | 32 Day(s) | 7.5 | Rp3/4 | Single-phase 200 | None | None | None | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | None | None | None | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | With auto drain | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | With auto drain | With dust-protecting filter | With mounting frame | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | With auto drain | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | With auto drain | None | With mounting frame | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | None | With dust-protecting filter | None | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | None | With dust-protecting filter | None | With terminal | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | None | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | None | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 7.5 | Rp3/4 | Single-phase 200 | None | None | With mounting frame | With terminal | ||
SGD 3,849.30 | 1 Piece(s) | 32 Day(s) | 22 | 1 1/2 B | Three-phase 200 | None | None | None | None | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | None | None | With terminal | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | With auto drain | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | With auto drain | With dust-protecting filter | With mounting frame | With terminal | ||
SGD 4,301.73 | 1 Piece(s) | 32 Day(s) | 22 | 1 1/2 B | Three-phase 200 | With auto drain | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | With auto drain | None | With mounting frame | With terminal | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | With dust-protecting filter | None | None | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | With dust-protecting filter | None | With terminal | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | With dust-protecting filter | With mounting frame | With terminal | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 22 | 1 1/2 B | Three-phase 200 | None | None | With mounting frame | With terminal | ||
SGD 6,017.08 | 1 Piece(s) | 32 Day(s) | 37 | 1 1/2 B | Three-phase 200 | None | None | None | None | ||
SGD 6,817.30 | 1 Piece(s) | 32 Day(s) | 37 | 1 1/2 B | Three-phase 200 | With auto drain | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 37 | 1 1/2 B | Three-phase 200 | With auto drain | None | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 37 | 1 1/2 B | Three-phase 200 | None | With dust-protecting filter | None | None | ||
- | 1 Piece(s) | Quote | 37 | 1 1/2 B | Three-phase 200 | None | With dust-protecting filter | With mounting frame | None | ||
- | 1 Piece(s) | Quote | 37 | 1 1/2 B | Three-phase 200 | None | None | With mounting frame | None |
Loading...
Basic Information
| Type | After Cooler |
|---|
Specification/Dimensions
-
Air compressor size (screw type)(KW)
- 7.5
- 15
- 22
- 37
-
Piping connection port diameter
- 1B
- 1 1/2 B
- Rp3/4
-
Power supply voltage(V)
- Single-phase 100
- Single-phase 200
- Three-phase 200
-
Auto drain
- None
- With auto drain
-
Filter for dust intrusion prevention
- None
- With dust-protecting filter
-
Frame
- None
- With mounting frame
-
Terminal
- None
- With terminal
-
type
- HAA15
- HAA22
- HAA37
- HAA7
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?