(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Toggle Type Air Gripper MHT2 Series (MHT2-63DZ-M9NW)
The new cylindrical body allows small auto switches to be mounted on 4 surfaces.
[Features]
· The toggle mechanism ensures a strong and stable gripping force.
· Holds workpiece even when the air is shut-off (safety measure).
(i)Caution
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Configured Part Number is shown.
MHT2-63DZ-M9NW
MHT2 Series Toggle Type Air Chuck Specifications
MHT2 Series JIS symbol (double acting, external gripping)
| Model | MHT2-32DZ | MHT2-40DZ | MHT2-50DZ | MHT2-63DZ |
|---|---|---|---|---|
| Bore size (mm) | 32 | 40 | 50 | 63 |
| Operating method | Double acting type | |||
| Applicable fluids | Air | |||
| Operating pressure | 0.1 to 0.6 MPa | |||
| Ambient temperature and working fluid temperature | 5 to 60°C | |||
| Lubrication | Non-lube | |||
| Finger opening angle (both sides) | -3° to +28 ° | -3° to 27 ° | -2° to 23 ° | -2° to 23 ° |
| Weight (g) | 790 | 1,070 | 1,890 | 2,720 |
| Gripping moment (effective value) N· mNote) | 12.4 | 36.0 | 63.0 | 106 |
Note) Value at pressure of 0.5 MPa
Outline dimensional drawing
(Unit: mm)
MHT2-32DZ dimensional drawing
(Unit: mm)
MHT2-40DZ dimensional drawing
Effective Gripping Force
L: Gripping point length dimensional drawing
- *Workpiece gripping point should be within the range indicated in the graph.
- *If there is an overhang, please consult with the manufacturer's support center.
Finger thrust: F diagram
The effective gripping force shown in the graphs below is expressed as F, which is the thrust of one finger when both fingers and attachments are in full contact with the workpiece as shown in the figure above.
MHT2-32DZ effective gripping force graph
When L = 100 mm
MHT2-40DZ effective gripping force graph
When L = 120 mm
MHT2-50DZ effective gripping force graph
When L = 150 mm
MHT2-63DZ effective gripping force graph
When L = 180 mm
Structural drawing
MHT2 Series structure drawing
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Side plate | Aluminum Alloy | Hard anodizing |
| 2 | Finger | Carbon steel | Black zinc chromate |
| 3 | Lever | Carbon steel | Black zinc chromate |
| 4 | Joint | Carbon steel | Black zinc chromate |
| 5 | Shaft | Stainless steel | - |
| 6 | Joint pin | Stainless steel | - |
| 7 | Cylinder plate | Soft steel | Black zinc chromate |
| 8 | Lever pin | Stainless steel | - |
| 9 | Shaft | - | Steel lined oil-impregnated acetal resin bearing |
| 10 | Shaft | - | Steel lined oil-impregnated acetal resin bearing |
| 11 | Cylinder | - | Compact cylinder |
Attachment Design
- 1. Design the attachment so that both fingers grip the workpiece when they are in parallel with each other.
- 2. Take care to enable fine adjustment of the attachment by inserting an adjustment shim, etc.
- 3. If the shim is too thin, the gripping force becomes insufficient and the workpiece may become unstable. Conversely, if the shim is too thick, the toggle mechanism is difficult to activate and a large impact sound may sometimes be produced. Carefully check this point.
- 4. The gripping status may become unstable due to continual wear of the bearing or shaft during operation. If this happens, make adjustments such as using a thicker shim according to the conditions.
Precautions
- *When the toggle is used to grip a workpiece, if the rod is pushed or a load is placed on it, the toggle mechanism may not work. This may result in shifting or dropping the workpiece, which could be dangerous.
- *If the grip is unstable, use shims, etc. to adjust the attachment.
- *To verify the gripping condition or to make any adjustments, make sure to do so in an area where the air chuck or the workpiece will not fall.
- *Be sure to read the product-specific precautions in the manufacturer's catalog before use.
- *See the manufacturer's catalog for product information other than the above.
| Part Number |
|---|
| MHT2-63DZ-M9NW |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Type | Finger Opening Angle A1 (deg) | Finger Closing Angle A2 (deg) | Gripping Force (when 0.5Mpa at closing) (N) | Cylinder internal diameter (mm) | Auto switch | Number of switches | Lead wire length | Made to order specifications | Connector type for gripper opening/closing | Port thread type | Gripping moment (effective value): when pressure is 0.5 MPa (N▪m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | - | - | - | 10,600 | 63 | M9NW | 2 pcs. | 0.5 m | None | None | Rc | - |
Loading...
Basic Information
| Gripping Methods | Pinch, Swing Type | Number of Fingers | 2 pcs. | Main Body Shape | Square Shape |
|---|---|---|---|---|---|
| Operation Method | Double Acting Type | Environment, Applications | Standard | Additional Functions | Not Provided |
| Stroke Adjustment Mechanism | Not Provided |
Please check the type/dimensions/specifications of the part MHT2-63DZ-M9NW in the Toggle Type Air Gripper MHT2 Series series.
Specification/Dimensions
-
Type
- Main Body
- Main Body
-
Gripping moment (effective value): when pressure is 0.5 MPa(N▪m)
- 12.4
- 36
- 63
- 106
-
type
- MHT2-32□
- MHT2-40□
- MHT2-50□
- MHT2-63□
-
Gripping Force (when 0.5Mpa at closing)(N)
-
Cylinder internal diameter(mm)
-
Auto switch
-
Number of switches
-
Lead wire length
- 0.5 m
- 1 m
- 3 m
- 5 m
- None
-
Made to order specifications
- Heat resistance (100°C)
- Double rod cylinder
- Fluorine grease
- Fluoroelastomer seal
- Head side with spigot
- None
-
Connector type for gripper opening/closing
- M8 3-pin
- M8 4-pin
- M12 4-pin
- None
-
Port thread type
- G
- NPT
- Rc
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| MHT2-32DZ-A90V-X5070 |
| MHT2-32DZ-A93 |
| MHT2-32DZ-A93L |
| MHT2-63DZ-M9NWL |
| MHT2-63DZ-M9NZ |
| MHT2-63DZ-M9P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Type | Finger Opening Angle A1 (deg) | Finger Closing Angle A2 (deg) | Gripping Force (when 0.5Mpa at closing) (N) | Cylinder internal diameter (mm) | Auto switch | Number of switches | Lead wire length | Made to order specifications | Connector type for gripper opening/closing | Port thread type | Gripping moment (effective value): when pressure is 0.5 MPa (N▪m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | - | - | - | 1,240 | 32 | A90V | 2 pcs. | 0.5 m | Head side with spigot | None | Rc | - | ||
- | 1 Piece(s) | Quote | - | - | - | 1,240 | 32 | A93 | 2 pcs. | 0.5 m | None | None | Rc | - | ||
SGD 773.73 | 1 Piece(s) | 32 Day(s) | - | - | - | 1,240 | 32 | A93 | 2 pcs. | 3 m | None | None | Rc | - | ||
- | 1 Piece(s) | Quote | - | - | - | 10,600 | 63 | M9NW | 2 pcs. | 3 m | None | None | Rc | - | ||
- | 1 Piece(s) | Quote | - | - | - | 10,600 | 63 | M9N | 2 pcs. | 5 m | None | None | Rc | - | ||
- | 1 Piece(s) | Quote | - | - | - | 10,600 | 63 | M9P | 2 pcs. | 0.5 m | None | None | Rc | - |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?