(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Air Cylinder CS2 Series (CDS2F140-1340)
[Features]
· Lighter weight makes it possible to reduce device weight
· Die cast rod cover and head cover used for greater weight reduction
· Rod diameter has been changed to suit the application, allowing for greater weight reduction
· Allowable lateral load equal to the CS1 series
· Function remains equal to the CS1 series even if rod diameter is changed to suit the application
· Improved operability after installation
Operability has been improved by placing the piping port and cushion valve operating position on the same side
· Interchangeable with CS1 series
Cylinder mounting dimensions and rod-end thread sizes are interchangeable with the CS1 series
· Maintenance improved by making cushion seals replaceable
· Compact auto switches can be mounted
(i)Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers.
- Product pictures are representations.
Part Number
Configured Part Number is shown.
CDS2F140-1340
Air Cylinder CS2 Series Specifications
Air Cylinder CS2 Series External Appearance
JIS symbol for Air Cylinder CS2 Series, double acting type, air cushion
Specifications
| Tube Inner Diameter (mm) | 125 | 140 | 160 | |
|---|---|---|---|---|
| Operating Method | Double acting, single rod | |||
| Applicable Fluids | Air | |||
| Proof Pressure | 1.57 MPa | |||
| Maximum Operating Pressure | 0.97 MPa | |||
| Minimum Operating Pressure | 0.05 MPa | |||
| Operating piston speed | 50 to 500 mm/s | |||
| Cushion | Air cushion | |||
| Ambient Temperature and Operating Fluid Temperature | Without auto switch | 0 to 70°C (no freezing) | ||
| With auto switch | 0 to 60°C (no freezing) | |||
| Lubrication | Not required (non-lubricated) | |||
| Stroke Length Tolerance (mm) | Stroke | Tolerance | ||
| 250 or less | +1.0 0 | |||
| 251 to 1,000 | +1.4 0 | |||
| 1,001 to 1,500 | +1.8 0 | |||
| 1,501 to 1,600 | +2.2 0 | |||
| Mounting Support Type | Basic type, foot type, rod-end flange type, head-end flange type single clevis type, double clevis type, center trunnion type | |||
Maximum Stroke Table
(Unit: mm)
| Tube Inner Diameter | Mounting Bracket | |
|---|---|---|
| Maximum Stroke | ||
| Basic Type, Head-End Flange Type Single Clevis Type, Double Clevis Type Center Trunnion Type | Foot Type Rod-End Flange Type | |
| 125 | 1,000 or less | 1,600 or less |
| 140 | ||
| 160 | 1,200 or less | |
Structural Drawing
Structural Drawing
Components
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Die-cast aluminum | Chromate |
| 2 | Head cover | Die-cast aluminum | Chromate |
| 3 | Cylinder tube | Aluminum alloy | Hard anodized aluminum |
| 4 | Piston | Aluminum alloy | Chromate |
| 5 | Piston rod | Carbon steel | Hard chrome plating |
| 6 | Bushing | Bearing alloy | - |
| 7 | Tie-rod | Carbon steel | Zinc chromate |
| 8 | Tie-rod nut | Rolled steel | Nickel plating |
| 9 | Cushion ring | Stainless steel | - |
| 10 | Cushion valve | Rolled steel | Nickel plating |
| 11 | Piston nut | Carbon steel | Nickel plating |
| 12 | Plain washer | Carbon steel | Nickel plating |
| 13 | Wear ring | Resin | - |
| 14 | Magnet* | - | - |
| 15 | Retaining ring | Spring steel | Phosphate coating |
| 16 | Rod packing | NBR | - |
| 17 | Cushion seal | Urethane | - |
| 18 | Piston packing | NBR | - |
| 19 | Valve packing | NBR | - |
| 20 | Tube gasket | NBR | - |
| 21 | Piston gasket | NBR | - |
- * Built-in magnet type with auto switch
Replacement Parts / Seal Kit
| Tube Inner Diameter (mm) | Order Number | Contents |
|---|---|---|
| 125 | CS2-125A-PS | Set of component part numbers (16), (17), (18) and (20) |
| 140 | CS2-140A-PS | |
| 160 | CS2-160A-PS |
- * The seal kit includes a grease pack (40 g).
Order with the following part number when only the grease pack is needed.
Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g)
- * Refer to p. 573 of the manufacturer's catalog for other models' dimensions, specifications, etc.
.jpg)
■ Refer to the table below for details about lead wire / connector specifications.
■ Made-to-order specifications: For details regarding special placement of port locations, please see below.
■ Made-to-order specifications: For details regarding a change to the trunnion bracket mounting location, please see below.
■ Made-to-order specifications: See below for details on those with rod-end bracket.
| Part Number |
|---|
| CDS2F140-1340 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Port thread type | Auto Switches | Lead Wire | The number of the switches | Rod Tip Metal Fitting | Type of Mount Support | Bellows | Custom-made Specifications | Customized specification (port positions) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 140 | 1,340 | Rc | None | - | - | - | Rod-end flange type | None | None | - |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard | Cushion | Air cushion |
Please check the type/dimensions/specifications of the part CDS2F140-1340 in the Air Cylinder CS2 Series series.
Specification/Dimensions
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M8 4-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 1 (M12 4-pin A-cord [normal-key] plug connector)
- 3
- 5
-
The number of the switches
-
Rod Tip Metal Fitting
- With double knuckle joint
- With double knuckle joint and rod end nut
- With rod end nut
- With rod end nut (for knuckle joint)
- With single knuckle joint
- With single knuckle joint and rod end nut
-
Customized specification (port positions)
- AB
- AC
- AD
- BA
- BB
- BC
- BD
- CA
- CC
- CD
- DA
- DB
- DC
- DD
-
type
- CDS2
- CS2
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
- 1
- 1,000
- 1,001
- 1,005
- 1,010
- 1,015
- 1,020
- 1,025
- 1,030
- 1,035
- 1,040
- 1,045
- 1,050
- 1,060
- 1,065
- 1,070
- 1,075
- 1,080
- 1,085
- 1,090
- 1,100
- 1,105
- 1,110
- 1,112
- 1,115
- 1,120
- 1,125
- 1,130
- 1,135
- 1,140
- 1,150
- 1,155
- 1,160
- 1,165
- 1,170
- 1,175
- 1,180
- 1,190
- 1,195
- 1,199
- 1,200
- 1,210
- 1,215
- 1,220
- 1,230
- 1,240
- 1,250
- 1,255
- 1,258
- 1,260
- 1,266
- 1,270
- 1,275
- 1,280
- 1,290
- 1,300
- 1,310
- 1,315
- 1,320
- 1,330
- 1,340
- 1,345
- 1,350
- 1,360
- 1,370
- 1,375
- 1,380
- 1,388
- 1,390
- 1,400
- 1,410
- 1,420
- 1,425
- 1,430
- 1,440
- 1,442
- 1,445
- 1,450
- 1,460
- 1,470
- 1,480
- 1,500
- 1,510
- 1,520
- 1,525
- 1,540
- 1,550
- 1,600
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 35
- 37
- 38
- 39
- 40
- 41
- 42
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 68
- 70
- 72
- 73
- 74
- 75
- 76
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 95
- 96
- 100
- 101
- 103
- 104
- 105
- 107
- 108
- 109
- 110
- 112
- 114
- 115
- 116
- 117
- 118
- 120
- 121
- 122
- 124
- 125
- 126
- 127
- 128
- 130
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 140
- 141
- 142
- 143
- 145
- 146
- 147
- 148
- 150
- 151
- 152
- 155
- 156
- 157
- 159
- 160
- 162
- 163
- 164
- 165
- 167
- 169
- 170
- 172
- 173
- 175
- 177
- 178
- 180
- 182
- 183
- 185
- 187
- 188
- 190
- 191
- 192
- 194
- 195
- 196
- 198
- 200
- 201
- 202
- 203
- 205
- 206
- 210
- 212
- 214
- 215
- 216
- 218
- 220
- 222
- 225
- 228
- 229
- 230
- 232
- 235
- 238
- 240
- 242
- 243
- 244
- 245
- 246
- 247
- 250
- 252
- 253
- 254
- 255
- 256
- 260
- 263
- 265
- 267
- 269
- 270
- 271
- 275
- 276
- 278
- 280
- 283
- 285
- 286
- 288
- 290
- 292
- 295
- 297
- 299
- 300
- 305
- 306
- 308
- 310
- 312
- 315
- 316
- 320
- 321
- 322
- 325
- 326
- 329
- 330
- 331
- 332
- 334
- 335
- 336
- 338
- 340
- 341
- 343
- 345
- 347
- 348
- 350
- 355
- 357
- 358
- 359
- 360
- 362
- 365
- 368
- 370
- 372
- 375
- 377
- 380
- 385
- 388
- 390
- 394
- 395
- 397
- 400
- 401
- 402
- 403
- 404
- 405
- 406
- 407
- 408
- 409
- 410
- 411
- 415
- 420
- 421
- 424
- 425
- 426
- 430
- 435
- 440
- 442
- 445
- 450
- 455
- 460
- 465
- 470
- 472
- 475
- 480
- 485
- 490
- 495
- 499
- 500
- 501
- 502
- 503
- 505
- 509
- 510
- 514
- 515
- 516
- 517
- 520
- 525
- 530
- 533
- 535
- 540
- 545
- 548
- 550
- 551
- 555
- 560
- 562
- 563
- 565
- 568
- 570
- 575
- 580
- 584
- 585
- 588
- 590
- 595
- 596
- 600
- 603
- 605
- 610
- 612
- 615
- 619
- 620
- 623
- 625
- 630
- 635
- 640
- 645
- 650
- 655
- 660
- 662
- 665
- 670
- 675
- 680
- 685
- 690
- 693
- 700
- 705
- 710
- 715
- 719
- 720
- 725
- 730
- 735
- 740
- 750
- 755
- 760
- 765
- 770
- 771
- 775
- 780
- 785
- 790
- 791
- 795
- 800
- 806
- 810
- 813
- 815
- 820
- 823
- 825
- 830
- 835
- 840
- 845
- 850
- 853
- 855
- 858
- 860
- 870
- 874
- 875
- 880
- 885
- 890
- 895
- 900
- 905
- 906
- 910
- 915
- 920
- 925
- 930
- 935
- 940
- 945
- 950
- 951
- 955
- 960
- 965
- 970
- 975
- 980
- 990
- 995
- 998
- 999
- 1172
- 1254
- 1305
- 1395
- 1452
-
Port thread type
- G
- NPT
- Rc
-
Auto Switches
-
Type of Mount Support
- Basic type
- Center trunnion type
- Foot
- Head-end flange
- Rod-end flange type
- Single clevis
- U-Shaped Clevis Type
-
Bellows
-
Custom-made Specifications
- Adjustable stroke cylinder / Adjustable retraction type
- Fluororubber seal
- Material: stainless steel (piston rod: with hard chrome plating)
- None
- Special port location
- With coil scraper
- With powerful scraper
- With rod-end bracket
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
- 52 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| CDS2B125-100-A44-XC86A |
| CDS2B125-100-A53 |
| CDS2B125-100-A54 |
| CDS2F140-1340-Y7BAL |
| CDS2F140-135 |
| CDS2F140-135-A93 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Port thread type | Auto Switches | Lead Wire | The number of the switches | Rod Tip Metal Fitting | Type of Mount Support | Bellows | Custom-made Specifications | Customized specification (port positions) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 125 | 100 | Rc | None | - | - | - | Basic type | None | None | - | ||
- | 1 Piece(s) | Quote | 125 | 100 | Rc | A53 | 0.5 | 2 | - | Basic type | None | None | - | ||
- | 1 Piece(s) | Quote | 125 | 100 | Rc | A54 | 0.5 | 2 | - | Basic type | None | None | - | ||
- | 1 Piece(s) | Quote | 140 | 1,340 | Rc | None | - | - | - | Rod-end flange type | None | None | - | ||
- | 1 Piece(s) | Quote | 140 | 135 | Rc | None | - | - | - | Rod-end flange type | None | None | - | ||
- | 1 Piece(s) | Quote | 140 | 135 | Rc | A93 | 0.5 | 2 | - | Rod-end flange type | None | None | - |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?