(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series (CA2KG63-125N)
[Features]
· Weight has been reduced by up to 15% by changing the shape of the rod cover and head cover
· Easy air cushion control
· Various switches such as compact auto switches and strong magnetic field resistant switches can be mounted
· With auto switch (CDA2K)
(i)Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers.
- Product pictures are representations.
Part Number
Configured Part Number is shown.
CA2KG63-125N
Model Number Notation
Model Number Notation
Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod, CA2K Series Specifications
CA2K Series external appearance
CA2K Series (air cushion) JIS symbol
| Tube Inner Diameter (mm) | 40 | 50 | 63 |
|---|---|---|---|
| Applicable Fluids | Air | ||
| Proof Pressure | 1.5 MPa | ||
| Maximum Operating Pressure | 1.0 MPa | ||
| Minimum Operating Pressure | 0.05 MPa | ||
| Ambient Temperature and Operating Fluid Temperature | Without auto switch: -10°C to 70°C, with auto switch: -10°C to 60°C* | ||
| Piston Speed | 50 to 500 mm/s | ||
| Cushion | Air cushion | ||
| Stroke Length Tolerance | Up to 250st: (0 to +1.0), 251 to 600st: (0 to +1.4) | ||
| Rod Non-rotating Accuracy | ±0.8° | ||
| Allowable Rotational Torque | 0.44N·m or Less | ||
| Lubrication | Not required (non-lubricated) | ||
| Mounting Support Type | Basic type, axial foot type, rod-end flange type, head-end flange type, single clevis type, double clevis type, center trunnion type | ||
- * No freezing.
Weights
(Unit: kg)
| Tube Inner Diameter (mm) | 40 | 50 | 63 | |
|---|---|---|---|---|
| Basic Weight | Basic Type | 0.88 | 1.32 | 1.91 |
| Axial Foot Type | 1.07 | 1.54 | 2.25 | |
| Flange Type | 1.25 | 1.77 | 2.70 | |
| Single Clevis Type | 1.11 | 1.66 | 2.54 | |
| Double Clevis Type | 1.15 | 1.75 | 2.70 | |
| Trunnion Type | 1.24 | 1.80 | 2.71 | |
| Additional Weight Per 50 Strokes | 0.20 | 0.25 | 0.30 | |
| Accessories | Single Knuckle Joint | 0.23 | 0.26 | 0.26 |
| Double Knuckle Joint (With Pin) | 0.37 | 0.43 | 0.43 | |
Calculation method
E.g. CA2KL40-100
- Basic weight: 1.07 (axial footø40 [40-mm tube inner diameter])
- Additional weight: 0.20 / 50 stroke
- Cylinder stroke: 100 stroke
1.07 + 0.20 × 100/50 = 1.47 kg
Bellows Material
- Bellows material (J): nylon tarpaulin, maximum ambient temperature 70°C
- Bellows material (K): heat-resistant tarpaulin, maximum ambient temperature 110°C*
- * Maximum ambient temperature for the bellows unit.
Structural Drawing
CA2K Series structural drawing
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Aluminum alloy | Metallic coating |
| 2 | Head cover | Die-cast aluminum | Metallic coating |
| 3 | Cylinder tube | Aluminum alloy | Hard anodized aluminum |
| 4 | Piston rod | Carbon steel | Hard chrome plating |
| 5 | Piston | Aluminum alloy | Chromate |
| 6 | Cushion ring A | Rolled steel | Zinc chromate |
| 7 | Cushion ring B | Rolled steel | Zinc chromate |
| 8 | Non-rotating guide | Oil-impregnated sintered alloy | - |
| 9 | Cushion valve | Steel wire | Zinc trivalent chromate |
| 10 | Tie-rod | Carbon steel | Zinc trivalent chromate |
| 11 | Spring washer | Steel wire | Zinc trivalent chromate |
| 12 | Piston nut | Rolled steel | Zinc trivalent chromate |
| 13 | Retaining ring | Spring steel | Phosphate coated |
| 14 | Spring washer | Steel wire | Zinc trivalent chromate |
| 15 | Tie-rod nut | Rolled steel | Zinc trivalent chromate |
| 16 | Wear ring | Resin | - |
| 17 | Cushion packing holder | Aluminum alloy | - |
| 18 | Cushion seal | Urethane | - |
| 19 | Rod packing | NBR | - |
| 20 | Piston packing | NBR | - |
| 21 | Cushion valve seal | NBR | - |
| 22 | Cylinder tube gasket | NBR | - |
| 23 | Piston gasket | NBR | O-ring |
| 24 | Rod end nut | Rolled steel | Zinc trivalent chromate |
- * Do not disassemble the trunnion type. See the catalog for details.
Drawing
(Unit: mm)
Basic type CA2KB dimensional drawing
(Unit: mm)
| Tube Inner Diameter (mm) | Stroke Range (mm) | A | AL | B | B1 | C | D | E | F | G | H1 | J | KA | M | MM | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Without Bellows | With Bellows | |||||||||||||||
| 40 | to 500 | 20 to 500 | 30 | 27 | 60 | 22 | 44 | 16 | 32 | 10 | 15 | 8 | M8 × 1.25 | 14 | 11 | M14 × 1.5 |
| 50 | to 600 | 20 to 600 | 35 | 32 | 70 | 27 | 52 | 20 | 40 | 10 | 17 | 11 | M8 × 1.25 | 18 | 11 | M18 × 1.5 |
| 63 | to 600 | 20 to 600 | 35 | 32 | 85 | 27 | 64 | 20 | 40 | 10 | 17 | 11 | M10 × 1.25 | 18 | 14 | M18 × 1.5 |
(Unit: mm)
| Tube Inner Diameter (mm) | N | P | S | Without Bellows | With Bellows | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| H | ZZ | d | e | f | h | L | ZZ | ||||
| 40 | 27 | 1/4 | 84 | 51 | 146 | 56 | 43 | 11.2 | 59 | 1/4 stroke | 154 |
| 50 | 30 | 3/8 | 90 | 58 | 159 | 64 | 52 | 11.2 | 66 | 1/4 stroke | 167 |
| 63 | 31 | 3/8 | 98 | 58 | 170 | 64 | 52 | 11.2 | 66 | 1/4 stroke | 178 |
- * The external dimensions for each mounting type and the dimensions of accessories (options) are the same as the standard type double acting single rod model. Refer to the manufacturer's catalog.
Notes
Minimum Stroke for Auto Switch Mounting
- * The minimum stroke for mounting varies with the auto switch type and cylinder mounting type. In particular, the center trunnion type requires careful attention. (Refer to the catalog for details.)
Precautions for Use
- *Avoid applying rotational torque to the piston rod. The non-rotating guide may become deformed, compromising the accuracy. Also, when screwing the nut onto the thread of the piston rod end, ensure the piston rod is fully retracted and use a wrench flat on the part protruding from the parallel part of the rod.
At this time, be careful not to apply tightening torque to the non-rotating guide.
Correct mounting diagram
Incorrect mounting diagram
Disassembly/Replacement
- * Contact the SMC support center when exchanging the rod packing. Air leaks may occur according to the position in which the rod packing is incorporated, so contact the SMC support center when exchanging the rod packing.
Do not exchange the non-rotating guide. The non-rotating guide is press-fitted, so use a cover assembly when exchanging.
Other
- * Before using, please refer to the "Safety Precautions," the "Actuator Precautions," and the "Auto Switch Precautions."
- * Product images are representative models.
- * Refer to the manufacturer's catalog for information not detailed above.
■ Made-to-order specifications: For details regarding a change to the trunnion bracket mounting location, please see below.
| Part Number |
|---|
| CA2KG63-125N |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Operating Pressure (MPa) | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Bellows | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 63 | 125 | Without cushion | 0.05 to 1.0 | Without magnet | Rc | - | - | - | Head-end flange | None | None |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | With rod detent function | Environment, Applications | Standard |
Please check the type/dimensions/specifications of the part CA2KG63-125N in the Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series series.
Specification/Dimensions
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M8 4-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 3
- 5
-
The number of the switches
-
type
- CA2K
- CDA2K
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
- 1
- 1,000
- 2
- 3
- 4
- 5
- 6
- 7
- 10
- 11
- 12
- 15
- 17
- 20
- 22
- 25
- 30
- 31
- 34
- 35
- 36
- 40
- 44
- 45
- 50
- 55
- 60
- 62
- 63
- 65
- 66
- 70
- 73
- 75
- 80
- 85
- 88
- 90
- 95
- 100
- 105
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 130
- 135
- 140
- 145
- 150
- 160
- 170
- 175
- 180
- 185
- 190
- 200
- 203
- 205
- 210
- 215
- 220
- 225
- 230
- 235
- 240
- 250
- 255
- 256
- 260
- 265
- 270
- 275
- 280
- 290
- 300
- 310
- 320
- 325
- 328
- 330
- 340
- 350
- 360
- 365
- 370
- 375
- 380
- 385
- 390
- 396
- 400
- 405
- 406
- 410
- 415
- 420
- 425
- 430
- 440
- 443
- 450
- 457
- 460
- 465
- 470
- 475
- 480
- 490
- 500
- 520
- 525
- 530
- 550
- 560
- 565
- 575
- 580
- 590
- 600
- 610
- 620
- 625
- 650
- 675
- 680
- 700
- 710
- 725
- 730
- 750
- 780
- 785
- 790
- 800
- 806
- 825
- 830
- 850
- 855
- 870
- 875
- 900
- 910
- 920
- 930
- 950
- 955
- 960
-
Cushion
-
Operating Pressure(MPa)
-
Specifications
- Built-in magnet
- Without magnet
-
Port thread type
- G
- NPT
- Rc
-
Type of Mount Support
- 0
- Axial foot type
- Basic type
- Center trunnion type
- Head-end flange
- Rod-end flange type
- Single clevis
- U-Shaped Clevis Type
-
Bellows
-
Custom-made Specifications
- Compact type with SS400 flange
- X1381
- Adjustable stroke cylinder / Adjustable extension type
- Adjustable stroke cylinder / Adjustable retraction type
- Change to the trunnion bracket mounting position (A type)
- Grease for food processing equipment
- None
- Tie-rod, cushion valve, tie-rod nut, etc.: made of stainless steel
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| CA2KB40-100B-XC8 |
| CA2KB40-100J |
| CA2KB40-100N |
| CA2KG63-150 |
| CA2KG63-150N |
| CA2KG63-175 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Operating Pressure (MPa) | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Bellows | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | - | - | - | - | - | - | - | - | - | 0 | 0 | Adjustable stroke cylinder / Adjustable extension type | ||
- | 1 Piece(s) | Quote | 40 | 100 | Air cushion | 0.05 to 1.0 | Without magnet | Rc | - | - | - | Basic type | Nylon tarpaulin | None | ||
- | 1 Piece(s) | Quote | 40 | 100 | Without cushion | 0.05 to 1.0 | Without magnet | Rc | - | - | - | Basic type | None | None | ||
- | 1 Piece(s) | Quote | 63 | 150 | Air cushion | 0.05 to 1.0 | Without magnet | Rc | - | - | - | Head-end flange | None | None | ||
- | 1 Piece(s) | Quote | 63 | 150 | Without cushion | 0.05 to 1.0 | Without magnet | Rc | - | - | - | Head-end flange | None | None | ||
- | 1 Piece(s) | Quote | 63 | 175 | Air cushion | 0.05 to 1.0 | Without magnet | Rc | - | - | - | Head-end flange | None | None |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?