(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
5.0 MPa Pilot Operated 3-Port Solenoid Valve VCH400 Series (VCH410-5DL-06G-Q)
Solenoid valve for air.
[Features]
· Response time variation ±2 ms.
· Lifespan: 10 million cycles.
· Non-collision structure between armatures eliminates abrasion.
· Improved responsiveness when turning OFF, reduced variation construction. Improved durability achieved by applying a special surface treatment to sliding parts.
· Unnecessary volume inside the pilot chamber is reduced. Quick response, reduced variation.
· Use of impact absorbing rubber protects the pilot valve and electric parts.
· Uses a special fluoropolymer sealant on sliding parts. Stable responsiveness after disuse and not easily damaged by pressure.
· Improved durability in high-pressure environments, thanks to the polyurethane elastomer poppet.
(i)Caution
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Part Number
Configured Part Number is shown.
VCH410-5DL-06G-Q
5 MPa Pilot Operated 3-Port Solenoid Valve VCH400 Series Specifications
5 MPa Pilot Operated 3-Port Solenoid Valve VCH400 Series external appearance
Valve type
5 MPa Pilot Operated 3-Port Solenoid Valve VCH400 Series Specifications Table
| Model | VCH410 | |||
|---|---|---|---|---|
| Valve Specifications | Valve Construction | Pilot operated poppet | ||
| Fluid | Air | |||
| Orifice equivalent diameter | ø18 (Orifice equivalent diameter 18 mm) | |||
| Flow Rate Characteristics | C value (effective cross-sectional area) | G1/2 1→2: 20 dm3/(s·bar) (100 mm2) G1/2 2→3: 22 dm3/(s·bar) (110 mm2) | G3/4, 1 1→2: 22 dm3/(s·bar) (110 mm2) G3/4, 1 2→3: 24 dm3/(s·bar) (120 mm2) | |
| b | G1/2 0.26 | G3/4, 1 0.36 | ||
| Cv | G1/2 1→2 5.3 G1/2 2→3 5.8 | G3/4, 1 1→2 5.8 G3/4, 1 2→3 6.3 | ||
| Maximum Operating Pressure | 5.0 MPa | |||
| Operating pressure differential*1 | 0.5 to 5.0 MPa | |||
| Fluid temperature | 5 to 80°C | |||
| Ambient temperature | 5 to 80°C | |||
| Body material | Aluminum alloy + hard anodized aluminum | |||
| Main valve sealing material | Polyurethane elastomer | |||
| Enclosure | Drip-proof (IP65 equivalent) | |||
| Port size | G1/2, 3/4, 1 (Compliant with ISO1179-1 G thread for pneumatics/hydraulics) | |||
| Impact resistance / Vibration resistance*2 | 300/100 m/s2 *3 | |||
| Mounting Orientation | Free | |||
| Weight | G1/2, 3/4: 1.83 kg, G1: 2.11 kg | |||
| Electrical Specifications | Voltage | 12 V, 24 V DC, 100 V, 110 V, 200 V, 220 V AC (50/60 Hz) | ||
| Allowable Voltage Fluctuation | ±10% of rated voltage | |||
| Electrical Entry | DIN terminal connector | |||
| Coil Insulation Type | Class B | |||
| Power consumption*4 | 5 W (DC), 13 VA (AC) | |||
*1: Be aware that even if the pressure differential is above the minimum operating pressure differential when the valve is closed, depending on the power of the supply source (pump, compressor, etc.) or the restriction of the ports, the pressure differential may fall below the minimum operating pressure when the valve opens.
· When used as a selector valve (pressurizing ports 1, 3) the pressure in the port should be within the range of 1 port pressure ≥ 3 port pressure × 2 (2 times).
· See the manufacturer's catalog for design precautions and model selection.
*2: Impact resistance: No malfunction occurred when tested using a drop tester. The test was performed once for each condition, in both energized and de-energized states, in the axial and right angle directions of the main valve/armature (initial values).
Vibration resistance: No malfunction occurred in 1 sweep test between 8.3 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)
*3: Vibration resistance is 50 m/s2 when an indicator light / surge protection circuit is attached.
*4: No inrush voltages are generated in the AC solenoid because a full-wave rectifier is used.
Response Time
Response time / Pressure graph
*1: With DC solenoid
*2: With AC solenoid, there will be 20 to 30 ms delays to the OFF response time.
*3: Conforms to JIS B 8419-2010.
Structure
Structure Drawing
| Number | Part name | Material |
|---|---|---|
| 1 | Body | Aluminum alloy + hard anodized aluminum |
| 2 | O-ring | NBR |
| 3 | O-ring | NBR |
| 4 | Hexagon Socket Head Bolt | Stainless steel |
| 5 | Piston A | Aluminum alloy + hard anodized aluminum |
| 6 | Piston B | Aluminum alloy + hard anodized aluminum |
| 7 | O-ring | NBR |
| 8 | Poppet | Polyurethane elastomer |
| 9 | Guide ring | Resin |
| 10 | O-ring | NBR |
| 11 | Ring | Resin |
| 12 | Rod | Stainless steel |
| 13 | Hex nut | Brass |
| 14 | Hex nut type 3 | Stainless steel |
| 15 | Poppet Spring | Stainless steel |
| 16 | Plate | Steel + Electroless nickel plating |
| 17 | Hex socket head bolt (with spring lock washer) | Carbon steel |
| 18 | Bonnet | Aluminum alloy + hard anodized aluminum |
| 19 | O-ring | NBR |
| 20 | Return Spring | Stainless steel |
| 21 | Armature Assembly | - |
| 22 | Tube assembly | Stainless steel |
| 23 | Nut | Brass |
| 24 | Rubber mount | NBR |
| 25 | DIN connector type solenoid coil | - |
| 26 | Round S-shaped retaining rings | Carbon steel |
| 27 | DIN terminal gasket | CR |
| 28 | DIN terminal connector | - |
Outline dimensional drawing
(Unit: mm)
VCH410 drawing (top)
VCH410 drawing (front)
VCH410 drawing (side) 1
VCH410 dimensional outline drawing (side) 2
Precautions
Selection
Switching element
Leakage voltage
*When the solenoid valve is operated using a controller, etc., the leakage voltage should be the product allowable voltage fluctuation or less.
In particular, when using a resistor in parallel with a switching element and using a C-R element (surge voltage suppressor) to protect the switching element, be aware that the leakage current will flow through the resistor, C-R element, etc., creating a risk that the valve will not turn OFF.
Piping
Preparation before piping
- *Before piping, it should be thoroughly blown out with air (flushing) or washed to remove chips, cutting oil or other debris.
- *Avoid pulling, compressing or bending the valve body when piping.
Connecting an R thread
Wrapping of sealing tape
*Sealing tape is not necessary since this product uses a pneumatic and hydraulic purpose G thread which conforms to ISO 1179-1. When an R (taper) thread is used, leave 1 to 2 threads at the tip exposed and wind the sealing tape around it 4 to 5 times.
| Port size | Proper tightening torque (N⋅m) |
|---|---|
| G, Rc1/2 | 28 to 30 |
| G, Rc3/4 | 28 to 30 |
| G, Rc1 | 36 to 38 |
Always tighten threads with the proper tightening torque
*When attaching fittings to valves, tighten to the proper tightening torque listed to the left.
- *When piping to a product, take care to avoid mistakes regarding the supply port, etc.
- *Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- *See the manufacturer's catalog for product information other than the above.
| Part Number |
|---|
| VCH410-5DL-06G-Q |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Voltage | Plumbing Thread Nominal | CV Value | Lead wire electrical entry | CE compliant |
|---|---|---|---|---|---|---|---|---|---|
SGD 1,585.97 | 1 Piece(s) | 32 Day(s) | DC24V | 3/4 | 5.8 | With DIN terminal connector, indicator light | Yes |
Loading...
Basic Information
| Type | Solenoid Valves | Application | Single Use | Number of Ports | 3-Port Valve |
|---|---|---|---|---|---|
| Mounting Orientation | Direct | Specifications | Standard / Drip-Proof | Number of Solenoids | Single |
| Switching Type | 2-Position Normally Closed | Status at Power Off | Self-Recovery (Spring Return) | Pipe Port Type | G |
| Driving Type | Pilot Type Poppet | Seal Type | Soft Seal | Pilot Air Supply | Internal |
Please check the type/dimensions/specifications of the part VCH410-5DL-06G-Q in the 5.0 MPa Pilot Operated 3-Port Solenoid Valve VCH400 Series series.
Specification/Dimensions
-
type
- VCH410
-
Voltage
- DC12V
- DC24V
- AC100V
- AC110V
- AC200V
- AC220V
-
Plumbing Thread Nominal
-
CV Value
-
Lead wire electrical entry
- DIN terminal connector
- With DIN terminal connector, indicator light
- Without DIN terminal connector, with gasket
-
CE compliant
- CE compliant product
- Non-compliant
- None
- Yes
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| VCH410-1D-06G-Q |
| VCH410-1D-10G |
| VCH410-1DL-04G |
| VCH410-5DL-10G |
| VCH410-5DL-10G-Q |
| VCH410-5DO-04G |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Voltage | Plumbing Thread Nominal | CV Value | Lead wire electrical entry | CE compliant |
|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | AC100V | 3/4 | 5.8 | DIN terminal connector | CE compliant product | ||
- | 1 Piece(s) | Quote | AC100V | 1 | 5.8 | DIN terminal connector | None | ||
SGD 1,579.55 | 1 Piece(s) | 32 Day(s) | AC100V | 1/2 | 5.3 | With DIN terminal connector, indicator light | None | ||
SGD 1,666.12 | 1 Piece(s) | 32 Day(s) | DC24V | 1 | 5.8 | With DIN terminal connector, indicator light | None | ||
- | 1 Piece(s) | Quote | DC24V | 1 | 5.8 | With DIN terminal connector, indicator light | Yes | ||
- | 1 Piece(s) | Quote | DC24V | 1/2 | 5.3 | Without DIN terminal connector, with gasket | None |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?