(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
3 Port Air Operated Valve, Base Mounted Single Unit VPA300/500/700 Series
An air operated valve made by SMC.
[Features]
· Internal pilot specification manifolds that are the same as for VP300/500/700 series are available.
· Easy to switch between N.C. and N.O.
(i)Caution
- Product images may be representative images. Refer to the catalog for details.
Part Number
Configured Part Number is shown.
3 Port Air Operated Valve, Base Mounted Type, Single Unit VPA300/500/700 Series Specifications
VPA300 Series external appearance
VPA500 Series external appearance
VPA700 Series external appearance
| Fluid | Air | |
|---|---|---|
| Switching Method | N.C. or N.O. (changeable) | |
| Operating Pressure Range (MPa) | Standard | 0.2 to 1.0 |
| For vacuums | -100 kPa to 0.2 | |
| Pilot Pressure (MPa) | 0.2 to 1.0 (equal to or exceeding the operating pressure) | |
| Ambient and Working Fluid Temperature °C | -10 to +50 (no freezing.) | |
| Lubrication | Not required | |
| Mounting Orientation | Free | |
| Impact/Vibration Resistance (m/s2*) | 300/50 | |
*Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve with both pilot signal ON and OFF, once for each condition state. (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed with both pilot signal ON and OFF and in the axial direction and at right angles to the main valve. (Initial value)
Flow Rate Characteristics / Weight List
| Model | Piping Connection Port Diameter | 1 ←→ 2 (P ←→ A) | 2 ←→ 3 (A ←→ R) | Weight (g)* | ||||
|---|---|---|---|---|---|---|---|---|
| C [dm3/(s·bar)] | b | Cv | C [dm3/(s·bar)] | b | Cv | |||
| VPA344 | 1/8 | 3.6 | 0.22 | 0.8 | 3.5 | 0.24 | 0.8 | 185 (118) |
| 1/4 | 3.9 | 0.22 | 0.9 | 3.8 | 0.14 | 0.9 | 180 (118) | |
| VPA544 | 1/4 | 7.5 | 0.16 | 1.7 | 7.3 | 0.20 | 1.7 | 358 (233) |
| 3/8 | 8.8 | 0.07 | 2.0 | 8.8 | 0.13 | 2.0 | 350 (233) | |
| VPA744 | 3/8 | 12.9 | 0.10 | 2.9 | 13.3 | 0.24 | 3.1 | 693 (476) |
| 1/2 | 14.7 | 0.05 | 3.3 | 15.0 | 0.17 | 3.4 | 675 (476) | |
*Values in ( ) are for without sub-plate.
Diagram
Standard type diagram
For vacuums - diagram
Component Parts
| Number | Part Name | Material | Notes |
|---|---|---|---|
| 1 | Body | Diecast aluminum | Urban white |
| 2 | Adapter Plate | Diecast aluminum | Urban gray |
| 3 | End Plate | Resin | Urban white |
| 4 | Piston | Resin | - |
| 5 | Poppet Valve | Aluminum, HNBR | - |
| 6 | Retainer | Resin | - |
| 7 | Spring | SUS | - |
Replacement Parts
| Number | Part Name | Part number | Notes | ||
|---|---|---|---|---|---|
| VP344 | VP544 | VP744 | |||
| 8 | Gasket | VP300-217-1 | VP500-217-1 | VP700-217-1 | HNBR |
| 9 | Sub-Plate | VP300-202-□ | VP500-202-□ | VP700-202-□ | Diecast aluminum |
| - | Hexagon socket head cap screw (1 pc.) | VP300-224-1 (M3 × 36) | VP500-224-1 (M4 × 46) | VP700-224-1 (M5 × 66) | For valve mounting |
*Mounting screw tightening torque: M3 (0.8 N·m) / M4 (1.4 N·m) / M5 (2.9 N·m)
Drawing
VPA300 Series Base Mounted Type
(Units: mm)
Standard type: VPA344-1-01/02□A/B dimensional drawing
(Units: mm)
For vacuums: VPA344V-1-01/02□A/B dimensional drawing
VPA500 Series Base Mounted Type
(Units: mm)
Standard type: VPA544-1-02/03□A/B dimensional drawing
(Units: mm)
For vacuums: VPA544V-1-02/03□A/B dimensional drawing
VPA700 Series Base Mounted Type
(Units: mm)
Standard type: VPA744-1-03/04□A/B dimensional drawing
*See the SMC catalog for information other than that detailed above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Fluid | Switching Type | Connection Type | Plumbing Thread Nominal | Driving Type | Detailed type | Valve type |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Air | Normally Closed | G | 1/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Open | G | 1/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Closed | G | 1/4 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Open | G | 1/4 | Pilot Type | - | Base mounted | ||
SGD 141.40 | 1 Piece(s) | 32 Day(s) | Vacuum | Normally Closed | G | 1/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Closed | G | 1/4 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Closed | G | 1/4 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Open | G | 1/4 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Closed | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Open | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Closed | G | 1/4 | - | VPA500 | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Open | G | 1/4 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Closed | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Open | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Closed | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Open | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Air | Normally Closed | G | 1/2 | Pilot Type | - | Base mounted | ||
SGD 244.77 | 1 Piece(s) | 32 Day(s) | Air | Normally Open | G | 1/2 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Closed | G | 3/8 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Closed | G | 1/2 | Pilot Type | - | Base mounted | ||
- | 1 Piece(s) | Quote | Vacuum | Normally Open | G | 1/2 | Pilot Type | - | Base mounted |
Loading...
Basic Information
| Type | Air Operating Type | Operating Environment | Standard / No oil | Pilot number | Single |
|---|---|---|---|---|---|
| Number of ports | 3 |
Specification/Dimensions
-
Applicable Fluid
- Air
- Vacuum
-
Switching Type
- Normally Closed
- Normally Open
-
Plumbing Thread Nominal
-
Driving Type
- Pilot Type
-
Detailed type
- VPA500
- VPA700
-
Valve type
-
type
- VPA300
- VPA5
- VPA500
- VPA7
- VPA700
-
Connection Type
- Rc (R)
- G
- NPT
- NPTF
- Rc (R)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?