(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
2-Layer Soft Fluoropolymer Tubing TQ Series (TQ0806-100)
Tubing with a 2-layer structure.
[Features]
· Fluids such as solvents are transferred by flexible piping with superior abrasion resistance.
· Wearing of outer layer tube: Reduced to 1/30.
· Flexibility: Improved by up to 55% (*1). * 1: Compared with SMC Fluoropolymer Tubing / TL (ø6 [6‑mm diameter] × ø4 [4‑mm diameter]).
[Applications]
· Semiconductors, food, medical, machine tools.
(i)Caution
- The maximum operating pressure values listed are at 20°C. See the catalog for details.
- For specifications and details, please refer to the catalog.
Part Number
Configured Part Number is shown.
TQ0806-100
- Download
Product Details - CAD Data unavailable
Features Of 2-Layer Soft Fluoropolymer Tubing TQ Series
How to measure the minimum bending radius
Bend the tube into a U shape at a temperature of 20°C. Fix one end and bend the loop gradually at 100 mm/min. Measure 2R when the tube breaks or is crushed.
Applicable Fluid List
Fluids in the list below are chemically inert to tubing material. Possible physical effects may occur such as penetration and swelling due to temperature, pressure and chemical density. To use tubing in a solvent environment, tests should be performed under the same environment to ensure no problem occurs under the operating environment.
| Chemical | Inner layer | Outer layer |
|---|---|---|
| Special fluoropolymer | Special nylon resin | |
| Hydrochloric acid | ○ | △ |
| Sulfuric acid | ○ | △ |
| Nitric acid | ○ | × |
| Caustic soda | ○ | △ |
| Caustic potash | ○ | △ |
| Ammonia hydroxide | ○ | ○ |
| Hydrogen peroxide | ○ | △ |
| Water | ○ | ○ |
| Phenol | ○ | × |
| Benzene | ○ | △ |
| Toluene | ○ | △ |
| Xylene | ○ | △ |
| Carbon tetrachloride | ○ | × |
| Acetone | ○ | △ |
| Methyl ethyl ketone | ○ | △ |
| Chemical | Inner layer | Outer layer |
|---|---|---|
| Special fluoropolymer | Special nylon resin | |
| Citric acid | ○ | △ |
| Stearic acid | ○ | △ |
| Formic acid | ○ | △ |
| Ethyl acetate | ○ | ○ |
| Butyl acetate | ○ | △ |
| Methyl alcohol | ○ | ○ |
| Ethyl alcohol | ○ | ○ |
| Butyl alcohol | ○ | ○ |
| Isopropyl alcohol | ○ | ○ |
| Cellosolve | △ | △ |
| Hexane | ○ | △ |
| Cyclohexane | ○ | △ |
| Mineral oil ASTM No. 3 | ○ | ○ |
| Naphtha | ○ | ○ |
- 1. "Chemically inert" means to not cause any chemical reaction.
- 2. Criteria: ◯ Applicable, △ Not recommended, × Inapplicable
- 3. Applicable Fluid List shows the reference values based on test results performed under specific conditions. Application to products is not guaranteed.
- 4. Applicable Fluid List is for tube materials. For use in environments containing solvents, please contact SMC.
Series List And Specifications
| Nominal | TQ0425 | TQ0604 | TQ0806 | TQ1008 | TQ1209 | |
|---|---|---|---|---|---|---|
| Outer diameter (mm) | 4 | 6 | 8 | 10 | 12 | |
| Inner diameter (mm) | 2.5 | 4 | 6 | 8 | 9 | |
| Roll | 20 m | ● | ● | ● | ● | ● |
| 100 m | ● | ● | ● | ● | ● | |
| ColorNote 1) | Translucent (material color) | |||||
| FluidNote 2) | Air, water, inert gas, solvent | |||||
| Applicable fittingsNote 3) Note 7) | Insert fittings KF, KFG2, VCK Series Miniature fittings M, MS Series (Hose-nipple type) Fluoropolymer fittings LQ1, LQ3Note 6) | |||||
| Maximum operating pressureNote 4) MPa | 20°C | 2.0 | 1.9 | 1.5 | 1.1 | 1.2 |
| Minimum bending radius (tube close bend radius)Note 5) mm | 4 | 9 | 26 | 42 | 37 | |
| Fluid temperature (fixed usage) | Air, inert gas: -20 to 100°C / Water, solvent: 0 to 70°C (No freezing) | |||||
| Material | Inner layer: special fluoropolymer, Outer layer: special nylon resin | |||||
- 1. There may be plasticizer (white powder) deposits on the external surface of the tube. Please exercise caution when using this item in a clean room. Otherwise, the clean level may decrease.
- 2. When solvent is used, make sure to test in the same environment as the actual operating environment, and confirm that no problem will occur under the operating conditions. The standard values of the Applicable Fluid List below are the reference values based on the results of tests performed under specific conditions. The product can be physically affected by temperature, pressure, chemical density, etc., causing permeation or swelling, and this may cause some problems.
- 3. Perform periodic maintenance inspections. If leakage continues to occur after tightening, replace the tube with a new one. If the tube will be used in a location where it moves, perform a test to make sure no problems occur under the actual operating conditions. When the product is used with motion for a long time, or at a high temperature, the tubes may leak due to deterioration of the materials.
- 4. Observe the lesser value of the maximum operating pressure between the tubing and fittings. The surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to tubes and fittings. Furthermore, abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
- 5. The minimum bend radius (tube close bend radius) is not guaranteed. The value of 2R is measured with a bent or flattened tube.
- 6. For the installation of fluoropolymer fitting LQ1 and LQ3, please contact SMC.
- 7. A fitting that seals the outer diameter of the tube such as a one-touch fitting is not applicable since it is in contact with the wetted part of the external layer nylon material.
Maximum operating pressure
| Temperature (°C) | TQ0425 | TQ0604 | TQ0806 | TQ1008 | TQ1209 |
|---|---|---|---|---|---|
| -20 to 20 | 2.0 | 1.9 | 1.5 | 1.1 | 1.2 |
| 30 | 1.7 | 1.6 | 1.2 | 0.9 | 1.0 |
| 40 | 1.4 | 1.4 | 1.0 | 0.8 | 0.9 |
| 50 | 1.2 | 1.1 | 0.8 | 0.6 | 0.8 |
| 60 | 1.1 | 1.0 | 0.7 | 0.5 | 0.7 |
| 70 | 1.0 | 0.9 | 0.6 | 0.4 | 0.6 |
| 80 | 0.9 | 0.8 | 0.5 | 0.4 | 0.5 |
| 90 | 0.8 | 0.7 | 0.4 | 0.3 | 0.4 |
| 100 | 0.7 | 0.6 | 0.4 | 0.3 | 0.3 |
Unit: MPa
| Part Number |
|---|
| TQ0806-100 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | O.D. [Distinction] | Inner Dia. d (Ø) | I.D. [Distinction] | Minimum Bending Radius (mm) | Bundle winding length (m) | Maximum operating pressure (MPa) |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 1,062.02 | 1 Piece(s) | 32 Day(s) | 8 | ~8 | 6 | ~6 | 26 | 100 | 1.5 |
Loading...
Basic Information
| Type | Straight | Cutting Service Usage | No | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Operating Environment | Standard | Color | Translucent (Material Color) | Material | Inner Layer: Special Fluoropolymer, Outer Layer: Special Nylon Resin |
| Operating temperature(°C) | Air, Inert Gas: -20 to 100 / Water, Solvent: 0 to 70 (Do Not Freeze) |
Please check the type/dimensions/specifications of the part TQ0806-100 in the 2-Layer Soft Fluoropolymer Tubing TQ Series series.
Specification/Dimensions
-
type
- TQ
-
Outer Dia. D(Ø)
-
O.D. [Distinction]
-
Inner Dia. d(Ø)
-
I.D. [Distinction]
-
Bundle winding length(m)
-
Maximum operating pressure(MPa)
- 1.1
- 1.2
- 1.5
- 1.9
- 2
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| TQ0425-20 |
| TQ0604-100 |
| TQ0604-20 |
| TQ0806-20 |
| TQ1008-100 |
| TQ1008-20 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | O.D. [Distinction] | Inner Dia. d (Ø) | I.D. [Distinction] | Minimum Bending Radius (mm) | Bundle winding length (m) | Maximum operating pressure (MPa) |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 132.53 | 1 Piece(s) | 32 Day(s) | 4 | ~4 | 2.5 | ~3 | - | 20 | 2 | ||
SGD 875.93 | 1 Piece(s) | 32 Day(s) | 6 | ~6 | 4 | ~4 | - | 100 | 1.9 | ||
SGD 175.23 | 1 Piece(s) | 32 Day(s) | 6 | ~6 | 4 | ~4 | - | 20 | 1.9 | ||
SGD 212.45 | 1 Piece(s) | 32 Day(s) | 8 | ~8 | 6 | ~6 | 26 | 20 | 1.5 | ||
SGD 1,550.38 | 1 Piece(s) | 32 Day(s) | 10 | ~10 | 8 | ~8 | - | 100 | 1.1 | ||
SGD 310.10 | 1 Piece(s) | 32 Day(s) | 10 | ~10 | 8 | ~8 | - | 20 | 1.1 |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?