(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Cylinder With Lock, Double Acting, Single Rod CNG Series (CDNGBN20-100-D-B54)
A cylinder with lock. Suitable for intermediate stops, emergency stops and drop prevention.
[Features]
· Uses the wedge effect to magnify the force applied to the taper ring and steel balls.
· Uses a brake shoe with superior wear resistance.
· The brake shoe length has been significantly increased (double that of the conventional model), providing outstanding durability and stable holding force.
· Structured so as not to be impacted by the quality of the lock-release air.
· The holding force is the same regardless of which direction the cylinder is locked.
· Manual override for unlocking.
· Format: non-lube type.
· Locking action: spring lock.
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
CDNGBN20-100-D-B54
Cylinder With Lock, Double Acting, Single Rod CNG Series Specifications
Cylinder With Lock, Double Acting, Single Rod CNG Series external appearance
| Tube Inner Diameter (mm) | 20 | 25 | 32 | 40 |
|---|---|---|---|---|
| Lubrication | Not required (non-lubricated) | |||
| Proof Pressure | 1.5 MPa | |||
| Maximum operating pressure | 1.0 MPa | |||
| Minimum operating pressure | 0.08 MPa | |||
| Piston Speed | *50 to 1,000 mm/s | |||
| Ambient Temperature and Operating Fluid Temperature | Without auto switch: -10°C to 70°C (no freezing) | |||
| With auto switch: -10°C to 60°C (no freezing) | ||||
| Cushioning | Rubber bumper, air cushion | |||
| Stroke Length Tolerance (mm) | Up to 800 st: (0 to +1.4) | |||
| Mount Support Type | Basic type, axial foot type, rod-end flange type, head-end flange type, rod-end trunnion type, head-end trunnion type, clevis type (use when port location is changed by 90°) | |||
*Load restrictions exist depending upon piston speed when locked, mounting orientation and operating pressure.
Lock Specifications
| Tube Inner Diameter (mm) | 20 | 25 | 32 | 40 |
|---|---|---|---|---|
| Locking Action | Spring locking (exhaust locking) | |||
| Unlocking pressure | 0.20 MPa or more | 0.25 MPa or more | ||
| Locking Starting Pressure | 0.15 MPa or less | 0.20 MPa or less | ||
| Operating Pressure Range | 0.2 to 1.0 MPa | 0.25 to 1.0 MPa | ||
| Locking Direction | Bidirectional | |||
| Holding Force (Maximum Static Load) N* | 215 | 335 | 550 | 860 |
*The holding force (maximum static load) indicates the maximum capacity, not the normal holding capacity. Therefore, be sure to select the cylinder upon checking the details on p. 864 in the SMC catalog.
Standard Stroke
For types with auto switch, also refer to the table of minimum strokes for auto switch mounting on p. 880 in the SMC catalog.
| Tube Internal Diameter (mm) | *1: Standard Stroke (mm) | Long Stroke (mm) | Maximum Manufacturable Stroke (mm) |
|---|---|---|---|
| 20 | 25, 50, 75, 100, 125, 150, 200 | 201 to 350 | 1,500 |
| 25 | 25, 50, 75, 100, 125, 150, 200, 250, 300 | 301 to 400 | |
| 32 | 301 to 450 | ||
| 40 | 301 to 800 |
*1: Intermediate strokes not listed above are produced to order. Spacer is not used for intermediate strokes.
*2: Long stroke applies to the axial foot type and rod-end flange types.
In the case of other mounting brackets or when the long stroke limits are exceeded, the maximum usable stroke is determined using the stroke selection table.
Structure Principle Drawing
Locked state construction principle drawing
Unlocked state construction principle drawing
Spring lock (exhaust locking)
The spring force that acts on the taper ring is magnified by a wedge effect, and is conveyed to the numerous steel balls that are arranged in 2 rows. These act on the brake shoe holder and brake shoe, which locks the piston rod by tightening it using a large force.
Unlocking is accomplished when air pressure is supplied to the unlocking port. The release piston and taper ring oppose the spring force, moving to the right side, and the ball retainer strikes cover section. The braking force is released as the steel balls are moved away from the taper ring by the ball retainer.
Stopping Accuracy
(Units: mm)
| Locking Method | Operating Piston Speed (mm/s) | |||
|---|---|---|---|---|
| 100 | 300 | 500 | 1,000 | |
| Spring Lock | ±0.3 | ±0.6 | ±1.0 | ±2.0 |
Conditions: Horizontal, Supplied pressure P = 0.5 MPa
Load weight: Upper allowable limit
Lock solenoid valve: Mounted directly to the unlocking port
Maximum value of stopping position variation from 100 measurements
Mounting Bracket Part Number
| Mounting Bracket | Tube Inner Diameter (mm) | |||
|---|---|---|---|---|
| 20 | 25 | 32 | 40 | |
| *1: Axial Foot Type | CNG-L020 | CNG-L025 | CNG-L032 | CNG-L040 |
| Flange | CNG-F020 | CNG-F025 | CNG-F032 | CNG-F040 |
| Trunnion Pin | CG-T020 | CG-T025 | CG-T032 | CG-T040 |
| *2: Clevis | CG-D020 | CG-D025 | CG-D032 | CG-D040 |
| Rod End Pivot Bracket | CNG-020-24 | CNG-025-24 | CNG-032-24 | CNG-040-24 |
| Head End Pivot Bracket | CG-020-24A | CG-025-24A | CG-032-24A | CG-040-24A |
*Foot and flange types include mounting bolt.
- *1: When foot brackets are used, order two pieces per cylinder.
- *2: A clevis pin and retaining ring or mounting bolt are shipped together with the clevis type.
*See the manufacturer's catalog for product information other than that detailed above.
| Part Number |
|---|
| CDNGBN20-100-D-B54 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Bellows | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 20 | 100 | Rubber cushion | Built-in magnet | Rc | B54 | 0.5 | 2 | Basic type | None | None |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | With fall prevention function / With Brake / With Intermediate Stop Function | Environment, Applications | Standard | End Locking | No |
| Valves | Presence | Operating Pressure(MPa) | 0.08 to 1.0 | Locking Direction | Bidirectional |
Please check the type/dimensions/specifications of the part CDNGBN20-100-D-B54 in the Cylinder With Lock, Double Acting, Single Rod CNG Series series.
Specification/Dimensions
-
type
- CDNG
- CNG
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
- 1,000
- 1,050
- 1,070
- 1,100
- 1,150
- 1,200
- 1,220
- 1,250
- 1,260
- 1,270
- 1,300
- 1,400
- 1,450
- 1,500
- 10
- 15
- 20
- 25
- 30
- 32
- 35
- 40
- 45
- 47
- 50
- 55
- 60
- 65
- 70
- 74
- 75
- 80
- 85
- 90
- 95
- 100
- 105
- 108
- 110
- 115
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 155
- 158
- 160
- 165
- 170
- 175
- 180
- 185
- 190
- 200
- 205
- 210
- 215
- 220
- 225
- 230
- 235
- 240
- 250
- 254
- 260
- 265
- 270
- 275
- 280
- 285
- 290
- 295
- 300
- 310
- 315
- 320
- 325
- 330
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 380
- 400
- 410
- 420
- 425
- 430
- 435
- 440
- 445
- 450
- 460
- 470
- 475
- 480
- 485
- 490
- 500
- 505
- 510
- 515
- 520
- 525
- 530
- 540
- 550
- 560
- 565
- 570
- 575
- 580
- 585
- 590
- 600
- 610
- 615
- 620
- 630
- 640
- 645
- 650
- 660
- 670
- 675
- 680
- 690
- 700
- 710
- 715
- 720
- 725
- 730
- 740
- 750
- 760
- 780
- 785
- 800
- 810
- 820
- 830
- 850
- 860
- 870
- 890
- 900
- 915
- 920
- 925
- 930
- 950
- 970
- 980
-
Cushion
-
Specifications
- Built-in magnet
- Without magnet
-
Port thread type
- NPT
- Rc
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M8 4-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 1 (M8 3-pin plug connector)
- 1 (M8 4-pin plug connector)
- 1 (M12 4-pin A-cord [normal-key] plug connector)
- 3
- 5
-
The number of the switches
-
Type of Mount Support
- Axial foot type
- Basic type
- Clevis shape
- Head-end flange
- Head end trunnion type
- Rod-end flange type
- Rod end trunnion type
-
Bellows
-
Custom-made Specifications
- None
- With coil scraper
- With powerful scraper
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| CDNGBA20-100-D-H7BS |
| CDNGBA20-100-D-M9B |
| CDNGBA20-100-D-M9BL |
| CDNGBN20-100-D-C73CL |
| CDNGBN20-100-D-C73L |
| CDNGBN20-100-D-C73L3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Bellows | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 20 | 100 | Air cushion | Built-in magnet | Rc | H7B | 0.5 | 1 | Basic type | None | None | ||
- | 1 Piece(s) | Quote | 20 | 100 | Air cushion | Built-in magnet | Rc | M9B | 0.5 | 2 | Basic type | None | None | ||
SGD 904.05 | 1 Piece(s) | 32 Day(s) | 20 | 100 | Air cushion | Built-in magnet | Rc | M9B | 3 | 2 | Basic type | None | None | ||
- | 1 Piece(s) | Quote | 20 | 100 | Rubber cushion | Built-in magnet | Rc | C73C | 3 | 2 | Basic type | None | None | ||
- | 1 Piece(s) | Quote | 20 | 100 | Rubber cushion | Built-in magnet | Rc | C73 | 3 | 2 | Basic type | None | None | ||
- | 1 Piece(s) | Quote | 20 | 100 | Rubber cushion | Built-in magnet | Rc | C73 | 3 | 3 | Basic type | None | None |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?