(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series (CS1FN180-230)
Tie-rod type air cylinder.
[Features]
· Square cover.
· Large bore size.
*See the SMC catalog for specification details.
*Product pictures are representative images. CAD data is not supported for some model numbers.
(i)Caution
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
CS1FN180-230
Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series Specifications
Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series external appearance
JIS symbol: Double acting type, air cushion
Specifications
| Type | Lube Type / Non-Lube Type | Air-hydro type |
|---|---|---|
| Tube Inner Diameter (mm) | ø125 to ø300 mm (internal diameter) | ø125 mm (internal diameter), ø140 mm (internal diameter), ø160 mm (internal diameter) |
| Fluid | Air | Turbine oil |
| Proof Pressure | *1.57 MPa | |
| Maximum Operating Pressure | 0.97 MPa | |
| Minimum Operating Pressure | 0.05 MPa | 0.06 MPa |
| Piston Speed | 50 to 500 mm/s | 0.5 to 200 mm/s |
| Cushioning | Yes | None |
| Ambient and Fluid Temperature | 0 to 70°C (no freezing) Air-hydro type: 5 to 60°C | |
| Stroke Length Tolerance (mm) | 250 st or less: (0 to +1.0), 251 to 1,000 st: (0 to +1.4), 1,001 to 1,500 st: (0 to +1.8) 1,501 to 2,000 st: (0 to +2.2), 2,001 to 2,400 st: (0 to +2.6) | |
| Mount Support Type | Basic type, foot type, rod-end flange type, head-end flange type, single clevis type, double clevis type, center trunnion type | |
*Japanese Class 2 Pressure Vessel Act compliant products: 1.46 MPa.
Maximum Stroke Table
(Units: mm)
| Tube Material | Aluminum Tube | Iron tube | |
|---|---|---|---|
| Tube Internal Diameter | Mounting Bracket | ||
| Basic Type / Head Flange Type Single Clevis Type / Double Clevis Type Center Trunnion Type / Foot Type Rod-end flange type | Basic Type / Head Flange Type / Single Clevis Type / Double Clevis Type Center Trunnion Type | Foot type Rod-end flange type | |
| 125 | 1,000 or less | 1,000 or less | 1,600 or less |
| 140 | 1,000 or less | 1,000 or less | 1,600 or less |
| 160 | 1,200 or less | 1,200 or less | 1,600 or less |
| 180 | - | 1,200 or less | *2,000 or less |
| 200 | - | *1,200 or less | *2,000 or less |
| 250 | - | 1,200 or less | 2,400 or less |
| 300 | - | 1,200 or less | 2,400 or less |
*Aluminum tubes are used for ø180‑mm and ø200‑mm Japanese Class 2 Pressure Vessel Act compliant products.
Main Materials and Surface Treatment
| Name | Material | Notes | |
|---|---|---|---|
| Cover | Rolled steel plate | Painted black | |
| Tube | ø125, ø140, ø160 | Aluminum alloy | Hard anodized aluminum |
| Carbon steel tube | Inner surface: hard anodized aluminum | ||
| ø180, ø200, ø250, ø300 | *Carbon steel tube | *Inner surface: hard anodized aluminum | |
| Sliding Part Seal | Lube type | NBR | JIS B2401 O-rings |
| Non-lube type | NBR | - | |
| Air-hydro type | NBR | - | |
| Piston rod | Carbon steel | Hard chrome plating | |
| Piston | Lube type | Cast iron | - |
| Non-lube type | Aluminum alloy casting (Iron tube: cast iron) | Chromate (for aluminum alloy casting) | |
| Air-hydro type | Aluminum alloy casting (Iron tube: cast iron) | Chromate (for aluminum alloy casting) | |
*ø180 mm and ø200 mm Japanese Class 2 Pressure Vessel Act compliant product material: aluminum alloy; Note should state "hard anodized aluminum".
Diagram
Lube type diagram
Non-lube type diagram
Air-hydro type diagram
Component Parts
| Number | Name | Material | Notes | |
|---|---|---|---|---|
| 1 | Rod cover | Rolled steel plate | Painted black | |
| 2 | Head cover | Rolled steel plate | Painted black | |
| 3 | Cylinder Tubing | ø125 to ø160 mm | Aluminum alloy | Hard anodized aluminum |
| ø125 to ø300 mm | Carbon steel tube | Inner surface: hard chrome plating | ||
| 4 | Piston | ★ Cast iron | - | |
| 5 | Piston rod | Carbon steel | Hard chrome plating | |
| 6 | Retaining Plate | Cast iron | Painted black | |
| 7 | Bushing | Resin/Copper alloy (Multiple layers) | - | |
| 8 | Valve Guide | Brass | - | |
| 9 | Tie-rod | Carbon steel | Bright chromate | |
| 10 | Tie-Rod Nut | Rolled steel | Black zinc chromate | |
| 11 | Spring Washer | Steel wire | Black zinc chromate | |
| 12 | Retaining Plate Bolt | Chrome molybdenum steel | Black zinc chromate | |
| 13 | Spring Washer | Steel wire | Black zinc chromate | |
| 14 | Cushion ring A | Rolled steel | Zinc chromate | |
| 15 | Cushion Ring B | Rolled steel | Zinc chromate | |
| 16 | Cushion Valve | Rolled steel | Electroless nickel plated | |
| 17 | Spacer A | Rolled steel | Zinc chromate | |
| 18 | Spacer B | Rolled steel | Zinc chromate | |
| 19 | Air Releasing Valve B | Rolled steel | Zinc chromate | |
| 20 | Air Releasing Valve A | Chrome molybdenum steel | - | |
| 21 | Check Ball | Chrome bearing steel | - | |
| 22 | *Tie-Rod Reinforcement Ring | Rolled steel | Painted black | |
| 32 | Wear Ring | Resin | - | |
*For long strokes
★ Non-lube and air-hydro type aluminum tube material: aluminum alloy casting.
Seal List
| Number | Name | Material |
|---|---|---|
| Lube type | ||
| 23 | Wiper Ring | NBR |
| *24 | Cushion Seal | |
| 25 | Rod Seal | |
| 26 | Piston Seal | |
| 27 | Valve Seal | |
| 28 | Tube Gasket | |
| *29 | Piston gasket | |
| 30 | Retaining Plate Gasket | |
| *31 | Guide Gasket | |
*Cushion seal, piston gasket and guide gasket are non-replaceable products and so are not included in the seal kit.
Non-Lube Type / Air-Hydro Type
- 25 / Rod seal material: NBR
- 26 / Piston seal material: NBR
*Seals except types 25 and 26 are the same as for the lube type. (Air-hydro type only: Excluding cushion seal)
Standard Type / Replacement Parts / Seal Kit
For replacement part numbers (seal kit) for the CS1 Series standard type air cylinders, refer to the table below.
Replacement parts (for 1 cylinder) are a set of wiper ring, rod seal, piston seal, valve seal, tube gasket and retaining plate gasket.
Standard Type (Lube Type)
| Tube Inner Diameter (mm) | Order Number | Content |
|---|---|---|
| 125 | CS1-125A-PS | Component Part Numbers Set of (23), (25), (26), (27), (28) and (30) |
| 140 | CS1-140A-PS | |
| 160 | CS1-160A-PS | |
| 180 | CS1-180A-PS | |
| 200 | CS1-200A-PS | |
| 250 | CS1-250A-PS | |
| 300 | CS1-300A-PS |
*The seal kit includes a grease pack (ø125 to 160 mm: 40 g, ø180 mm and ø200 mm: 50 g, ø250 mm and ø300 mm: 60 g.
Order with the following part number when only the grease pack is needed.
Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g)
Standard Type (Non-Lube Type)
| Tube Inner Diameter (mm) | Order Number | Content |
|---|---|---|
| 125 | CS1N125A-PS | Component Part Numbers Set of (23), (25), (26), (27), (28) and (30) |
| 140 | CS1N140A-PS | |
| 160 | CS1N160A-PS | |
| 180 | CS1N180A-PS | |
| 200 | CS1N200A-PS | |
| 250 | CS1N250A-PS | |
| 300 | CS1N300A-PS |
*The seal kit includes a grease pack (ø125 to 160 mm: 40 g, ø180 mm and ø200 mm: 50 g, ø250 mm and ø300 mm: 60 g.
Order with the following part number when only the grease pack is needed.
Grease pack part number: GR-S-010 (10 g), GR-S-020 (20 g)
Air-hydro type
| Tube Inner Diameter (mm) | Order Number | Content |
|---|---|---|
| 125 | CS1H125A-PS | Component Part Numbers Set of (23), (25), (26), (27), (28) and (30) |
| 140 | CS1H140A-PS | |
| 160 | CS1H160A-PS |
Precautions
Warning
- Do not use the cylinder as a shock absorber. Using the cylinder as a shock absorber will cause the cylinder to break.
Caution
- Do not open the cushion valve excessively. Excessive rotation of the cushion valve in the opening direction (counter-clockwise) may result in the valve slipping out or the mating threads becoming too short and/or breaking.
- Contact SMC if the knuckle joint must be installed on the piston rod using the rod end nut. Do not put adhesive tape or other objects on the painted surface.
- The paint on the CS cylinder is dried naturally, so it may peel if tape or other objects are placed on it.
*See the manufacturer's catalog for product information other than that detailed above.
| Part Number |
|---|
| CS1FN180-230 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder Operation Method | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Environment, Applications | Cushion | Operating Pressure (MPa) | Port thread type | Rod Tip Metal Fitting | Type of Mount Support | Bellows | Tube Material | Custom-made Specifications | Customized specification (port positions) | Pressure vessel construction code | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 1,708.00 | 1 Piece(s) | 32 Day(s) | - | 180 | 230 | Standard | With cushions on both sides | 0.05 to 0.97 | Rc | None | Rod-end flange type | None | Iron tube | None | - | Conforming | Non-lube |
Loading...
Basic Information
| Rod Operation Method | Single Rods | Main Body Shape | Standard | Additional Function | Standard |
|---|---|---|---|---|---|
| End Locking | No | Valves | Presence |
Please check the type/dimensions/specifications of the part CS1FN180-230 in the Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series series.
Specification/Dimensions
-
Cylinder Operation Method
- Double Acting
- Double Acting
-
Customized specification (port positions)
- AC
- AD
- BA
- BC
- BD
- CA
- CB
- CD
- DA
- DB
- DC
-
type
- CS1□
- CS1□H
- CS1□N
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
- 1
- 1,000
- 1,001
- 1,002
- 1,009
- 1,010
- 1,015
- 1,016
- 1,020
- 1,025
- 1,030
- 1,035
- 1,045
- 1,050
- 1,055
- 1,060
- 1,070
- 1,075
- 1,080
- 1,085
- 1,090
- 1,100
- 1,110
- 1,115
- 1,120
- 1,125
- 1,130
- 1,140
- 1,145
- 1,150
- 1,160
- 1,165
- 1,170
- 1,180
- 1,185
- 1,190
- 1,195
- 1,200
- 1,210
- 1,215
- 1,219
- 1,220
- 1,225
- 1,240
- 1,250
- 1,260
- 1,270
- 1,280
- 1,290
- 1,295
- 1,300
- 1,306
- 1,310
- 1,318
- 1,320
- 1,330
- 1,340
- 1,350
- 1,360
- 1,370
- 1,375
- 1,385
- 1,388
- 1,390
- 1,400
- 1,410
- 1,415
- 1,420
- 1,432
- 1,442
- 1,450
- 1,455
- 1,460
- 1,470
- 1,485
- 1,486
- 1,500
- 1,505
- 1,510
- 1,515
- 1,520
- 1,525
- 1,530
- 1,535
- 1,540
- 1,550
- 1,552
- 1,560
- 1,569
- 1,570
- 1,575
- 1,580
- 1,600
- 1,650
- 1,680
- 1,688
- 1,700
- 1,710
- 1,750
- 1,760
- 1,790
- 1,800
- 1,810
- 1,850
- 1,880
- 1,900
- 1,910
- 1,950
- 1,960
- 2
- 2,000
- 2,050
- 2,100
- 2,150
- 2,160
- 2,200
- 2,230
- 2,250
- 2,300
- 2,340
- 2,350
- 2,370
- 2,400
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 29
- 30
- 31
- 32
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 48
- 50
- 51
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 68
- 69
- 70
- 71
- 72
- 73
- 75
- 76
- 80
- 82
- 83
- 84
- 85
- 86
- 89
- 90
- 95
- 96
- 98
- 99
- 100
- 101
- 102
- 104
- 105
- 106
- 107
- 108
- 110
- 111
- 113
- 114
- 115
- 116
- 118
- 120
- 121
- 122
- 123
- 125
- 126
- 127
- 128
- 130
- 132
- 133
- 135
- 139
- 140
- 141
- 142
- 144
- 145
- 146
- 147
- 149
- 150
- 151
- 152
- 154
- 155
- 156
- 157
- 158
- 160
- 162
- 163
- 165
- 167
- 168
- 170
- 173
- 174
- 175
- 176
- 177
- 178
- 180
- 183
- 185
- 187
- 188
- 190
- 192
- 193
- 195
- 196
- 197
- 200
- 201
- 203
- 204
- 205
- 208
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 222
- 223
- 224
- 225
- 228
- 229
- 230
- 234
- 235
- 237
- 240
- 242
- 243
- 245
- 249
- 250
- 251
- 254
- 255
- 259
- 260
- 262
- 265
- 266
- 267
- 270
- 275
- 276
- 280
- 283
- 285
- 287
- 288
- 290
- 294
- 295
- 296
- 300
- 301
- 304
- 305
- 307
- 309
- 310
- 311
- 312
- 314
- 315
- 318
- 320
- 322
- 325
- 328
- 329
- 330
- 334
- 335
- 336
- 340
- 343
- 344
- 345
- 348
- 350
- 352
- 353
- 354
- 355
- 356
- 360
- 363
- 365
- 368
- 370
- 372
- 373
- 375
- 377
- 378
- 380
- 381
- 385
- 388
- 390
- 392
- 395
- 398
- 400
- 401
- 402
- 403
- 405
- 406
- 407
- 408
- 410
- 413
- 415
- 416
- 420
- 422
- 424
- 425
- 430
- 432
- 435
- 440
- 444
- 445
- 447
- 450
- 453
- 455
- 457
- 460
- 465
- 467
- 470
- 475
- 476
- 480
- 485
- 490
- 495
- 500
- 505
- 507
- 508
- 510
- 514
- 515
- 516
- 520
- 524
- 525
- 526
- 528
- 530
- 533
- 534
- 535
- 538
- 540
- 545
- 546
- 547
- 548
- 550
- 551
- 554
- 555
- 556
- 557
- 558
- 559
- 560
- 563
- 564
- 565
- 566
- 570
- 575
- 576
- 580
- 585
- 588
- 590
- 595
- 600
- 605
- 606
- 608
- 610
- 615
- 620
- 625
- 626
- 627
- 630
- 635
- 640
- 645
- 650
- 655
- 660
- 665
- 670
- 675
- 680
- 686
- 688
- 690
- 694
- 700
- 701
- 705
- 706
- 710
- 711
- 715
- 720
- 724
- 725
- 727
- 730
- 735
- 737
- 740
- 745
- 750
- 754
- 755
- 758
- 760
- 762
- 765
- 770
- 775
- 777
- 780
- 785
- 790
- 792
- 794
- 800
- 801
- 805
- 810
- 811
- 812
- 813
- 814
- 815
- 820
- 823
- 825
- 830
- 832
- 835
- 838
- 840
- 843
- 845
- 849
- 850
- 855
- 860
- 863
- 865
- 870
- 873
- 875
- 880
- 885
- 890
- 895
- 900
- 905
- 908
- 910
- 914
- 915
- 920
- 922
- 925
- 930
- 934
- 935
- 938
- 940
- 945
- 950
- 955
- 960
- 963
- 965
- 970
- 975
- 980
- 985
- 988
- 990
- 994
- 995
- 997
- 998
- 999
-
Environment, Applications
- Standard
- Heat Resistant
-
Cushion
-
Operating Pressure(MPa)
-
Port thread type
- G
- NPT
- Rc
-
Rod Tip Metal Fitting
- Double knuckle joint, with rod end nut
- None
- Single knuckle joint, with rod end nut
- With double knuckle joint
- With rod end nut
- With rod end nut (for knuckle joint)
- With single knuckle joint
-
Type of Mount Support
- Basic type
- Center trunnion type
- Foot
- Head-end flange
- Rod-end flange type
- Single clevis
- U-Shaped Clevis Type
-
Bellows
-
Tube Material
- Aluminum tube
- Iron tube
-
Custom-made Specifications
- Heat-resistant cylinder (-10 to 150°C)
- Heat-resistant cylinder (110°C)
- Change to the trunnion bracket mounting position (A type)
- Change to trunnion bracket mounting position (B type)
- Clevis pin with flat (plain) washer
- Double clevis pin and double knuckle pin material: stainless steel
- Fluororubber seal
- Large diameter air-hydro cylinder
- Material: stainless steel
- Mount trunnion on front of rod cover
- None
- Powerful rod type cylinder
- Rod: SUS with hard chrome plating
- Special port location
- With coil scraper
- With powerful scraper
- With rod-end bracket
-
Pressure vessel construction code
- Conforming
- Non-conforming
-
Type
- Air-hydro type
- Lube type
- Non-lube
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
- 51 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| CS1B125-100-XC86A |
| CS1B125-1000-XC35 |
| CS1B125-1000-XC6 |
| CS1FN180-235-XB6 |
| CS1FN180-24 |
| CS1FN180-240-XC3AC |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder Operation Method | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Environment, Applications | Cushion | Operating Pressure (MPa) | Port thread type | Rod Tip Metal Fitting | Type of Mount Support | Bellows | Tube Material | Custom-made Specifications | Customized specification (port positions) | Pressure vessel construction code | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | - | 125 | 100 | Standard | With cushions on both sides | 0.05 to 0.97 | Rc | With rod end nut | Basic type | None | Aluminum tube | With rod-end bracket | - | Conforming | Lube type | ||
- | 1 Piece(s) | Quote | - | 125 | 1,000 | Standard | With cushions on both sides | 0.05 to 0.97 | Rc | None | Basic type | None | Aluminum tube | With coil scraper | - | Conforming | Lube type | ||
- | 1 Piece(s) | Quote | - | 125 | 1,000 | Standard | With cushions on both sides | 0.05 to 0.97 | Rc | None | Basic type | None | Aluminum tube | Material: stainless steel | - | Conforming | Lube type | ||
- | 1 Piece(s) | Quote | - | 180 | 235 | Heat Resistant / Standard | With cushions on both sides | 0.05 to 0.97 | Rc | None | Rod-end flange type | None | Iron tube | Heat-resistant cylinder (-10 to 150°C) | - | Conforming | Non-lube | ||
- | 1 Piece(s) | Quote | - | 180 | 24 | Standard | With cushions on both sides | 0.05 to 0.97 | Rc | None | Rod-end flange type | None | Iron tube | None | - | Conforming | Non-lube | ||
- | 1 Piece(s) | Quote | - | 180 | 240 | Standard | With cushions on both sides | 0.05 to 0.97 | Rc | None | Rod-end flange type | None | Iron tube | Special port location | AC | Conforming | Non-lube |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?