(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Low Torque Rotary Joint MQR Series
A rotary manifold in which the piping ports are aligned in a spiral pattern for easy piping.
[Features]
· Stable rotational torque that is not easily affected by supply pressure or temperature fluctuations.
· There is no change in the rotary torque due to spool sticking to the rotating surface, even after a long periods of non-operation.
· Low rotational torque: 0.003 to 0.50 N·m or less.
· Operating temperature: -10 to +80°C.
· Allowable rotational speed: 200 to 3,000 min-1 (rpm).
[Applications]
· For air supplies to rotational/rocking shafts on metal-seal type turntables, robot arms, etc.
(i)Caution
- Refer to the catalog for product specs.
- The product shown in the image may be a representative image. Refer to the catalog for product shapes and types.
Part Number
Configured Part Number is shown.
Low Torque Rotary Joint Metal Seal Type MQR Series specifications
Specifications
| Model | MQR1-M5 | MQR2-M5 | MQR4-M5 | MQR8-M5 | MQR12-M5 | MQR16-M5 | |
|---|---|---|---|---|---|---|---|
| Number of circuits (number of ports) | 1 circuit | 2 circuits | 4 circuits | 8 circuits | 12 circuits | 16 circuits | |
| Operating fluid | Air | ||||||
| Seal structure | Metal seal | ||||||
| Guide structure | Bearing support | Bearing support at both ends | |||||
| Connection port diameter | Male thread R1/8 | M5 × 0.8 | |||||
| Female thread M5 × 0.8 | |||||||
| Flow rate characteristics | C | 0.50 [dm3/(s-bar)] | |||||
| b | 0.40 | ||||||
| Cv | 0.17 | ||||||
| Lubrication | Not required | ||||||
| Minimum operating pressure | -100 kPa | ||||||
| Maximum operating pressure | 1.0 MPa | ||||||
| Ambient temperature and operating fluid temperature Note 1: | -10 to 80°C | ||||||
| Starting rotational torqueNote 2: | 0.003 N·m or less | 0.03 N·m or less | 0.05 N·m or less | 0.10 N·m or less | 0.20 N·m or less | 0.50 N·m or less | |
| Allowable rotational speedNote 5: | 3,000 min-1 (rpm) or lessNote 3: | 2,000 min-1 (rpm) or less | 1,500 min-1 (rpm) or less | 900 min-1 (rpm) or less | 600 min-1 (rpm) or less | 200 min-1 (rpm) or less | |
| Allowable radial load (Allowable coupling axis reaction)Note 4: | 1 N or less | 15 N or less | 30 N or less | 40 N or less | 50 N or less | ||
| Allowable axial load | |||||||
| Weight | 0.025 kg | 0.16 kg | 0.39 kg | 0.76 kg | 1.26 kg | 2.80 kg | |
Note 1: The temperature 80° includes temperature rises during rotation.
Note 2: The starting rotational torque does not change with the supply pressure or with non-use (remains within starting allowable rotational torque), but it does change with the rotational speed.
Note 3: If using at a speed above 600 min-1 (r.p.m.), ensure rotation is in the direction in which the joint is fastened.
Note 4: Rubber/resin couplings are recommended due to their excellent absorption of off center misalignments, shocks and vibrations.
Note 5: min-1 is the number of rotations per minute.
Mounting bracket
| Number of circuits | Flange part number |
|---|---|
| 2 circuits | MQR2-F |
| 4 circuits | MQR4-F |
| 8 circuits | MQR8-F |
| 12 circuits | MQR12-F |
| 16 circuits | MQR16-F |
Structural drawing
MQR1-M5 structural drawing
Components / (MQR1-M5, 1 circuit)
| Number | Part name | Material | Additional notes |
|---|---|---|---|
| 1 | Body | Stainless steel | - |
| 2 | Spool | Special stainless steel | - |
| 3 | Sleeve | Special stainless steel | - |
| 4 | Plate | Aluminum | - |
| 5 | O-ring | H-NBR | - |
| 6 | Retaining ring | Carbon steel | - |
| 7 | Retaining ring | Carbon steel | - |
| 8 | Radial bearing | - | - |
MQR2 to 16-M5 structural drawing
Components / (MQR2 to 16-M5, 2 to 16 circuits)
| Number | Part name | Material | Additional notes |
|---|---|---|---|
| 1 | Body | Aluminum | - |
| 2 | Adapter plate | Aluminum | - |
| 3 | Spool | Special stainless steel | - |
| 4 | Sleeve | Special stainless steel | - |
| 5 | Gasket | H-NBR | - |
| 6 | Bearing retainer | Stainless steel | 16-circuit only |
| 7 | Gasket | H-NBR | 16-circuit only |
| 8 | Plate | Aluminum | 16-circuit only |
| 9 | Flange | Aluminum | - |
| 10 | Parallel pin | Carbon steel | Excluding 2-circuit |
| 11 | O-ring | H-NBR | - |
| 12 | Bolt | Carbon steel | 16-circuit only |
| 13 | Bolt | Carbon steel | - |
| 14 | Bolt | Carbon steel | - |
| 15 | Radial bearing | - | - |
Standard Type / Flange Type outline dimensional drawing ('*' indicates the dimensions of the flange type)
MQR1-M5 dimensional drawing (Units: mm)
MQR2-M5 dimensional drawing (Units: mm)
MQR4-M5 dimensional drawing (Units: mm)
MQR8-M5 dimensional drawing (Units: mm)
MQR12-M5 dimensional drawing (Units: mm)
MQR16-M5 dimensional drawing (Units: mm)
Included bracket dimensions / flange
MQR2-F, MQR4-F, MQR8-F, MQR12-F and MQR16-F dimensional drawing (Units: mm)
Refer to the manufacturer's catalog for information not provided above.
| Part Number |
|---|
| MQR1-M5 |
| MQR2-M5 |
| MQR4-M5 |
| MQR8-M5 |
| MQR12-M5 |
| MQR16-M5 |
| MQRF2-M5 |
| MQRF4-M5 |
| MQRF8-M5 |
| MQRF12-M5 |
| MQRF16-M5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number of Circuits (Number of Ports) | Allowable Rotational Speed (min-1(r.p.m.)) | Fitting material | Type | Nominal of thread | Thread size P |
|---|---|---|---|---|---|---|---|---|---|---|
SGD 188.18 | 1 Piece(s) | 32 Day(s) | 1 | 3000 | Aluminum | Standard | M5 | R 1/8 | ||
SGD 1,015.70 | 1 Piece(s) | 32 Day(s) | 2 | 2000 | Aluminum | Standard | M5 | - | ||
SGD 1,431.97 | 1 Piece(s) | 32 Day(s) | 4 | 1500 | Aluminum | Standard | M5 | - | ||
SGD 2,264.73 | 1 Piece(s) | 32 Day(s) | 8 | 900 | Aluminum | Standard | M5 | - | ||
SGD 3,642.10 | 1 Piece(s) | 32 Day(s) | 12 | 600 | Aluminum | Standard | M5 | - | ||
SGD 11,172.00 | 1 Piece(s) | 32 Day(s) | 16 | 200 | Aluminum | Standard | M5 | - | ||
SGD 1,098.65 | 1 Piece(s) | 32 Day(s) | 2 | 2000 | Aluminum | Flange | M5 | - | ||
SGD 1,521.22 | 1 Piece(s) | 32 Day(s) | 4 | 1500 | Aluminum | Flange | M5 | - | ||
SGD 2,360.52 | 1 Piece(s) | 32 Day(s) | 8 | 900 | Aluminum | Flange | M5 | - | ||
SGD 3,744.18 | 1 Piece(s) | 32 Day(s) | 12 | 600 | Aluminum | Flange | M5 | - | ||
SGD 11,376.28 | 1 Piece(s) | 32 Day(s) | 16 | 200 | Aluminum | Flange | M5 | - |
Loading...
Specification/Dimensions
-
Number of Circuits (Number of Ports)
- 1
- 2
- 4
- 8
- 12
- 16
-
Allowable Rotational Speed(min-1(r.p.m.))
-
Fitting material
- Aluminum
-
Type
- Flange
- Mounting Bracket
- Mounting support bracket
- Standard
-
Nominal of thread
- M5
-
Thread size P
- R 1/8
-
type
- MQR
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?