(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
One-Touch Fitting Manifold KM14 (KM14-04-06-02S-3-X2)
- Volume Discount
A one-touch fitting that enables compact centralized piping.
[Features]
· Enables compact piping.
· Allows centralized piping.
· Broad series lineup (40 models.)
· One-touch mounting.
(i)Caution
- *See the catalog for detailed specs and materials.
- Product images may be representative images. See the catalog for shape/type details.
Part Number
Configured Part Number is shown.
KM14-04-06-02S-3-X2
One-Touch Fitting Manifold KM Series Specifications
KM14 structural drawing
Port A: one-touch fitting
Port B: one-touch fitting, Rc male threads
Specifications
| Model | KM14 |
|---|---|
| Usable fluids | Air, waterNote 2: |
| Operating pressure range | -100 kPa to 1 MPa |
| Guaranteed proof pressure | 3 MPa |
| Ambient temperature and working fluid temperature | -5 to 60°C, 0 to 40°C if water (no freezing) |
| Thread | JIS B0203 (tapered pipe thread) |
| Accessories | NA |
Note 2: Make sure the surge pressure stays below the maximum operating pressure.
Main Part Materials
| Model | KM14 |
|---|---|
| Body | PBT |
| Stud / Drive rod | C3604 |
| Chuck | SUS304 |
| Guide | SUS304 |
| Collet, release button | POM |
| Seal, O-ring | NBR |
KM14 dimensional drawing
| Applicable tube Outer diameter mm | Connection threads R | Model | H (width across flats) | øD1 | øD2 | L1 | L2 | L3 | P | A | Q1 | Q2 | M1 | M2 | Port B Minimum hole diameter | Weight g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (a) | (b) | ||||||||||||||||
| 4 | 6 | 1/8 | KM14-04-06-01S-3 | 13 | 10.4 | 12.8 | 67.1 | 18 | 13 | 10.4 | 64 | 38.2 | 9.9 | 17 | 16 | 4.5 | 18 |
| 1/4 | KM14-04-06-02S-3 | 14 | 71 | 65.5 | 25 | ||||||||||||
| 3/8 | KM14-04-06-03S-3 | 17 | 72.4 | 67.5 | 38 | ||||||||||||
| 4 | 8 | 1/8 | KM14-04-08-01S-3 | 17 | 10.4 | 15.2 | 72.6 | 19 | 15.5 | 10.4 | 69.5 | 38.2 | 11.1 | 18.5 | 16 | 6 | 30 |
| 1/4 | KM14-04-08-02S-3 | 76 | 70.5 | ||||||||||||||
| 3/8 | KM14-04-08-03S-3 | 76.4 | 71 | 38 | |||||||||||||
| 6 | 8 | 1/8 | KM14-06-08-01S-3 | 17 | 12.8 | 15.2 | 79.1 | 20 | 15.5 | 12.8 | 76.5 | 45.4 | 11.1 | 18.5 | 17 | 6 | 31 |
| 1/4 | KM14-06-08-02S-3 | 82.5 | 77 | ||||||||||||||
| 3/8 | KM14-06-08-03S-3 | 82.9 | 78 | 39 | |||||||||||||
| 6 | 10 | 1/4 | KM14-06-10-02S-3 | 19 | 12.8 | 18.5 | 87 | 21 | 19 | 12.8 | 81.5 | 45.4 | 12.8 | 21 | 17 | 7.5 | 43 |
| 3/8 | KM14-06-10-03S-3 | 87.4 | 82 | 44 | |||||||||||||
| 1/2 | KM14-06-10-04S-3 | 22 | 91.1 | 84 | 66 | ||||||||||||
| 8 | 10 | 1/4 | KM14-08-10-02S-3 | 19 | 15.2 | 18.5 | 93.5 | 22.5 | 19 | 15.2 | 88 | 52.6 | 12.8 | 21 | 18.5 | 7.5 | 47 |
| 3/8 | KM14-08-10-03S-3 | 93.9 | 89 | ||||||||||||||
| 1/2 | KM14-08-10-04S-3 | 22 | 97.6 | 90.5 | 70 | ||||||||||||
(Units: mm)
| Part Number |
|---|
| KM14-04-06-02S-3-X2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Body Material | Packing, Material of O-Ring | Applicable Tube O.D.1 (φ) | Applicable Tube Outer Diameter 2 (φ) | Types of connection | Connection screw | Color | Release button color | Custom-made specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 5 Piece(s) | Quote | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | R | 1/4 | Black | Blue | Non-specification Steel-based (with electroless nickel plating) |
Loading...
Basic Information
| Types | Single-Action / Screw | Fitting Type | Union with different diameters | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Application | Standard/Mini | Thread Material | Brass | Union, Unequal Dia. | Single-Action Pipe Fitting / Manifold |
| Port A Number | 3 |
Please check the type/dimensions/specifications of the part KM14-04-06-02S-3-X2 in the One-Touch Fitting Manifold KM14 series.
Specification/Dimensions
-
type
- KM14
-
Body Material
- SUS303, SUS304
- Others
- SUS303, SUS304
-
Packing, Material of O-Ring
- Standard (NBR Nitrile Rubber )
- Standard (NBR Nitrile Rubber )
-
Applicable Tube O.D.1(φ)
-
Applicable Tube Outer Diameter 2(φ)
-
Types of connection
- R
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
-
Color
- Black
-
Release button color
- Blue
- Light Blue
- White
-
Custom-made specifications
- Lubricant: white petroleum jelly, release bushing color change
- Lubrication-free specification, rubber material, release button color change, non-steel-based specification (with electroless nickel plating)
- N/A
- Non-grease specification, rubber material・release push color change
- Non-specification Steel-based (with electroless nickel plating)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| KM14-04-06-01S-3-X2 |
| KM14-04-06-02S-3 |
| KM14-04-06-02S-3-X12 |
| KM14-04-06-03S-3 |
| KM14-04-06-03S-3-X12 |
| KM14-04-06-03S-3-X17 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Body Material | Packing, Material of O-Ring | Applicable Tube O.D.1 (φ) | Applicable Tube Outer Diameter 2 (φ) | Types of connection | Connection screw | Color | Release button color | Custom-made specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 5 Piece(s) | Quote | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | R | 1/8 | Black | Blue | Non-specification Steel-based (with electroless nickel plating) | ||
SGD 11.32 | 5 Piece(s) | Available | 32 Day(s) | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | R | 1/4 | Black | Blue | N/A | |
- | 5 Piece(s) | Quote | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | R | 1/4 | Black | White | Lubricant: white petroleum jelly, release bushing color change | ||
SGD 11.32 | 5 Piece(s) | Available | 32 Day(s) | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | R | 3/8 | Black | Blue | N/A | |
- | 5 Piece(s) | Quote | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR | 4 | 6 | R | 3/8 | Black | White | Lubricant: white petroleum jelly, release bushing color change | ||
- | 5 Piece(s) | Quote | [Others] Other | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 4 | 6 | R | 3/8 | Black | Light Blue | Non-grease specification, rubber material・release push color change |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?