(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Corrosion-Resistant SUS304 Fitting, Straight
- On Sale Till 31/03/2025
If strength is required, optimal for chemical atmospheres.
Japanese Only
Part Number
Configured Part Number is shown.
Corrosion-Resistant Tube Fitting Stainless SUS304 - Straight Specifications
Corrosion-resistant Tube Fitting Stainless SUS304 - Straight appearance
Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing
Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing
(metric thread type)
Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: 0 to 60°C (no freezing)
Warning
- *When the fluid used is water or other liquids, the following conditions must be observed.
- When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- Be sure to use an insert ring when using water or other liquids.
- For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.
Size Chart
| Format | Tube Outer Diameter øD | R | A | B | L | Tube End C | Hex H | Orifice Diameter (ømm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|
| PC4-M5SUS | 4 | M5 × 0.8 | 3 | 20.1 | 17.1 | 15 | 10 | 1.8 | 5.9 |
| PC4-M6SUS | M6 × 1 | 4 | 21.1 | 3 | 6.2 | ||||
| PC4-01SUS | R1/8 | 8 | 7.8 | ||||||
| PC4-02SUS | R1/4 | 11 | 15.1 | 14 | 15 | ||||
| PC6-M5SUS | 6 | M5 × 0.8 | 3 | 22.2 | 19.2 | 17.1 | 12 | 1.8 | 8.5 |
| PC6-M6SUS | M6 × 1 | 4 | 23.2 | 3 | 8.8 | ||||
| PC6-01SUS | R1/8 | 8 | 22.7 | 18.7 | 4.6 | 8.7 | |||
| PC6-02SUS | R1/4 | 11 | 24.7 | 14 | 17 | ||||
| PC6-03SUS | R3/8 | 12 | 23.7 | 17.4 | 17 | 26 | |||
| PC8-01SUS | 8 | R1/8 | 8 | 27.9 | 23.9 | 18.2 | 14 | 6 | 15 |
| PC8-02SUS | R1/4 | 11 | 26.6 | 20.6 | 7 | ||||
| PC8-03SUS | R3/8 | 12 | 23.9 | 17.6 | 17 | 22 | |||
| PC10-01SUS | 10 | R1/8 | 8 | 30.5 | 26.5 | 20.9 | 17 | 6 | 22 |
| PC10-02SUS | R1/4 | 11 | 30 | 24 | 8.5 | 20 | |||
| PC10-03SUS | R3/8 | 12 | 29.5 | 23.2 | 25 | ||||
| PC10-04SUS | R1/2 | 15 | 30.5 | 22.3 | 21 | 47 | |||
| PC12-02SUS | 12 | R1/4 | 11 | 36.1 | 30.1 | 23.5 | 21 | 8.5 | 41 |
| PC12-03SUS | R3/8 | 12 | 32.1 | 25.8 | 11 | 34 | |||
| PC12-04SUS | R1/2 | 15 | 34.1 | 25.9 | 47 | ||||
| PC16-03SUS | 16 | R3/8 | 12 | 39.5 | 33.2 | 25 | 24 | 11 | 56 |
| PC16-04SUS | R1/2 | 15 | 41.5 | 33.3 | 13 | 63 |
Units: mm
- *Taper thread type L dimensions are reference dimensions after tightening with screws.
Applicable Tube Size
Millimeter size: ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm), ø12 (diameter 12 mm), ø16 (diameter 16 mm)
Applicable Tube Size
| Metric Thread | M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Thread | R1/8, R1/4, R3/8, R1/2 |
- *See the manufacturer's catalog for other precautions and important notes.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 |
|---|---|---|---|---|---|---|---|
SGD 39.40 | 1 Piece(s) | 4 Day(s) or more | 4 | R | 1/8 | ||
SGD 41.87 | 1 Piece(s) | 4 Day(s) or more | 4 | R | 1/4 | ||
SGD 48.96 | 1 Piece(s) | 4 Day(s) or more | 4 | M | M5×0.8 | ||
SGD 48.96 | 1 Piece(s) | 10 Day(s) | 4 | M | M6×1 | ||
SGD 50.68 SGD 26.35 | 1 Piece(s) | Same day | 6 | R | 1/8 | ||
SGD 41.53 SGD 26.58 | 1 Piece(s) | Same day | 6 | R | 1/4 | ||
SGD 51.03 | 1 Piece(s) | 4 Day(s) or more | 6 | R | 3/8 | ||
SGD 48.59 | 1 Piece(s) | Same day | 6 | M | M5×0.8 | ||
SGD 48.59 SGD 9.72 | 1 Piece(s) | Same day | 6 | M | M6×1 | ||
SGD 50.22 | 1 Piece(s) | 11 Day(s) or more | 8 | R | 1/8 | ||
SGD 44.51 SGD 8.90 | 1 Piece(s) | Same day | 8 | R | 1/4 | ||
SGD 52.41 | 1 Piece(s) | 4 Day(s) or more | 8 | R | 3/8 | ||
SGD 68.76 | 1 Piece(s) | 4 Day(s) or more | 10 | R | 1/8 | ||
SGD 68.76 | 1 Piece(s) | 11 Day(s) or more | 10 | R | 1/4 | ||
SGD 68.76 | 1 Piece(s) | 4 Day(s) or more | 10 | R | 3/8 | ||
SGD 68.76 | 1 Piece(s) | 4 Day(s) or more | 10 | R | 1/2 | ||
SGD 72.32 | 1 Piece(s) | 4 Day(s) or more | 12 | R | 1/4 | ||
SGD 72.32 | 1 Piece(s) | 9 Day(s) | 12 | R | 3/8 | ||
SGD 72.32 | 1 Piece(s) | 4 Day(s) or more | 12 | R | 1/2 | ||
SGD 81.44 | 1 Piece(s) | 9 Day(s) | 16 | R | 3/8 | ||
SGD 77.32 | 1 Piece(s) | 8 Day(s) | 16 | R | 1/2 |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Screw Mount Direction | Applicable Fluid | Water / Air / Chemicals、Solvent / Mixed Gas |
|---|---|---|---|---|---|
| Body Material | SUS304 | Application | Standard/Mini / Foods・Drug-Related | Screw Mounting, Direction | Straight |
| Operating Temperature(°C) | 0::60 |
Specification/Dimensions
-
Applicable Tube O.D.1(φ)
-
Connection Screw Type 1
- M
- R
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
- M5×0.8
- M6×1
-
type
- PC-SUS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 4 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?