(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Waterproof NJW connectors including PSE market-acquired products
Part Number
Configured Part Number is shown.
NJW-16-3-PF-9
Model | Shell Size | Number of Cores | Shape Symbol | Clamp Size (Note 1) | Contact Shape | PSE Mark * | Weight g (Note 2) |
NJW | 16 | 3 | PF | 9 11 | Female (Socket) | ○ | 53 |
5 | 51 ~ 52 | ||||||
3 | PM | Male (Pin) | ○ | 51 | |||
5 | 50 | ||||||
20 | 2 | PF | 8 10 12 | Female (Socket) | ○ | 69 ~ 71 | |
3 | ○ | 70 ~ 72 | |||||
4 | ○ | 70 ~ 71 | |||||
5 | ○ | 71 ~ 72 | |||||
7 | 71 ~ 72 | ||||||
12 | 69 ~ 70 | ||||||
2 | PM | Male (Pin) | ○ | 66 ~ 68 | |||
3 | ○ | 67 ~ 69 | |||||
4 | ○ | 66 ~ 67 | |||||
5 | ○ | 67 ~ 68 | |||||
7 | 67 ~ 69 | ||||||
12 | 67 ~ 68 | ||||||
24 | 2 | PF | 11 13 15 | Female (Socket) | ○ | 94 ~ 95 | |
3 | ○ | 96 ~ 97 | |||||
4 | ○ | 95 ~ 97 | |||||
5 | ○ | 96 ~ 97 | |||||
10 | 96 ~ 98 | ||||||
14 | 93 ~ 95 | ||||||
16 | 93 ~ 95 | ||||||
2 | PM | Male (Pin) | ○ | 93 ~ 94 | |||
3 | ○ | 97 ~ 98 | |||||
4 | ○ | 90 ~ 91 | |||||
5 | ○ | 91 ~ 92 | |||||
10 | 91 ~ 92 | ||||||
14 | 89 ~ 90 | ||||||
16 | 89 ~ 90 | ||||||
28 | 16 | PF | 14 16 18 | Female (Socket) | 72 ~ 74 | ||
24 | 67 ~ 70 | ||||||
16 | PM | Male (Pin) | 64 ~ 66 | ||||
24 | 61 ~ 63 |
Size | Compatible Cable Finished Outer Diameter (Unit: mm) | Size | Compatible Cable Finished Outer Diameter (Unit: mm) | |
8 | Ø7.0 ~ 8.5 | 13 | Ø11.1 ~ 13.0 | |
9 | Ø8.0 ~ 9.4 | 14 | Ø12.5 ~ 14.0 | |
10 | Ø8.6 ~ 10.5 | 15 | Ø13.1 ~ 15.0 | |
11 | Ø9.5 ~ 11.0 | 16 | Ø14.1 ~ 16.0 | |
12 | Ø10.6 ~ 12.5 | 18 | Ø16.1 ~ 18.0 |
Shell Size | ØA | ØB | C | D | ØE | F |
16 | 22 | 12.7 | 10.7 | M18 x 1 | 24.0 | 50 |
20 | 26 | 16.3 | 10.7 | M22 x 1 | 26.5 | 60 |
24 | 30 | 20.5 | 10.7 | M26 x 1 | 29.0 | 67 |
28 | 34 | 24.7 | 10.5 | M30 x 1 | 32.0 | 72 |
Part Number |
---|
NJW-16-3-PF-9 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Allowable Current (A) | Allowable Voltage (V) | Representative Standard | Shell size | Conforming cable finishing outer diameter (φ mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 19.73 | 1 Piece(s) | Available | 4 Day(s) or more | - | Female (socket) | 3 | 10 | 125 | PSE | 16 | 8.0 ~ 9.4 |
Loading...
Waterproof Medium Type Connectors (NJW)
Features
● NJW series connectors are round metal connectors, designed to enhance water-proofing functionality when mated. (IPX7 equivalent)Common Specifications
Materials / Finish
Item | Materials | Finish |
---|---|---|
Shell / Dustproof Cap | Zinc or Aluminum Alloy (shell size 28) |
Chrome Plated or special chemical processing |
Insulator | Synthetic Resin | - |
Contact | Copper Alloy | Silver Plating |
Rubber Packing | Synthetic Rubber | - |
Characteristics
Item | Contents |
---|---|
Rated Current | Check with the table below. |
Rated Voltage | Check with the table below. |
Withstand Voltage | No abnormality such as short circuiting occurs when regulated voltage is applied for 1 minute between immediately adjacent conductors. |
Insulation Resistance | 1,000 MΩ or higher when measured between immediately adjacent conductors with regulated voltage. |
Contact Resistance | Conductor resistance is 5 mΩ or less when a pair of contacts are connected at up to the regulation length. |
Vibration Resistance | No functional defect was found during the JIS C 5025 vibration test. Contact resistance is 5 mΩ or less. |
Impact Resistance | No functional defect was found during the JIS C 5026 shock test. Contact resistance is 5 mΩ or less. |
Repeated Operation | No functional defect was found when a removal and insertion sequence was tested 500 times. Contact resistance is 5 mΩ or less. |
Humidity Resistance | No functional defect was found during the JIS C 5023 humidity test. Insulation resistance is 100 MΩ. |
Temperature Cycle | No functional defect was found during the JIS C 5030 temperature cycle test. |
Corrosion Resistance | No functional defect was found during the JIS C 5028 salt water spray test. Contact resistance is 5 mΩ or less. |
Waterproofing | No abnormality such as flooding was found when left under water pressure of 0.4 kgf/cm2 at regular working conditions for 24 hours or more. |
Operating Temperature Range | -25°C ~ +85°C |
Table of Basic Specifications
Product No. | Shell Size |
Number of Cores | Shape Symbol | Rated Current (A or less) |
Rated Voltage (V or less) |
Withstand Voltage AC (V) |
Insulation Resistance (MΩ or higher) |
Contact Resistance (mΩ or less) |
Compatible Wire Size | Applicable Electric Wire Finished Outer Diameter (mm) Note 1 |
|
---|---|---|---|---|---|---|---|---|---|---|---|
AWG | Conductor Section Area mm2 | ||||||||||
NJW | 16 | 3 | PF, RM, ADM |
10 | 125 | 1,500 | 2,000 | 3 | 16 | 1.25 | 8.0 ~ 11.0 |
5 | 5 | 1,000 | 1,000 | 5 | 20 | 0.5 | |||||
16 | 3 | PM, RF, ADF |
10 | 125 | 1,500 | 2,000 | 3 | 16 | 1.25 | 8.0 ~ 11.0 | |
5 | 5 | 1,000 | 1,000 | 5 | 20 | 0.5 | |||||
20 | 2, 3 | PF, RM, ADM |
15 | 250 | 1,500 | 2,000 | 3 | 14 | 2 | 7.0 ~ 12.5 | |
4, 5 | 10 | 16 | 1.25 | ||||||||
7 | 1,000 | ||||||||||
12 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
20 | 2, 3 | PM, RF, ADF |
15 | 250 | 1,500 | 2,000 | 3 | 14 | 2 | 7.0 ~ 12.5 | |
4, 5 | 10 | 16 | 1.25 | ||||||||
7 | 1,000 | ||||||||||
12 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
24 | 2, 3 | PF, RM, ADM |
20 | 250 | 1,500 | 5,000 | 3 | 12 | 3.5 | 9.5 ~ 15.0 | |
4, 5 | 15 | 14 | 2 | ||||||||
10 | 10 | 1,000 | 2,000 | 16 | 1.25 | ||||||
14, 16 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
24 | 2, 3 | PM, RF, ADF |
20 | 250 | 1,500 | 5,000 | 3 | 12 | 3.5 | 9.5 ~ 15.0 | |
4, 5 | 15 | 14 | 2 | ||||||||
10 | 10 | 1,000 | 2,000 | 16 | 1.25 | ||||||
14, 16 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
28 | 16 | PF, RM, ADM |
10 | 250 | 1,000 | 2,000 | 3 | 16 | 1.25 | 12.5 ~ 18.0 | |
24 | 5 | 1,000 | 5 | 20 | 0.5 | ||||||
28 | 16 | PM, RF, ADF |
10 | 250 | 1,000 | 2,000 | 3 | 16 | 1.25 | 12.5 ~ 18.0 | |
24 | 5 | 1,000 | 5 | 20 | 0.5 |
Contact Arrangement Diagram
Connection Work Method
Connector Shape | Circular Type | Connector series initials | M・N・O | M·N·O | NJW |
---|---|---|---|---|---|
Application | Cable to cable | Wire connection method | Solder | Connection direction | Straight |
Protection function (environmentally resistant) | Present | Removal method | Others |
Please check the type/dimensions/specifications of the part NJW-16-3-PF-9 in the NJW Waterproof Straight Plug (Screw) series.
Part Number |
---|
NJW-16-3-PF-11 |
NJW-16-3-PM-11 |
NJW-16-3-PM-9 |
NJW-16-5-PF-11 |
NJW-16-5-PF-9 |
NJW-16-5-PM-11 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Allowable Current (A) | Allowable Voltage (V) | Representative Standard | Shell size | Conforming cable finishing outer diameter (φ mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 19.73 | 1 Piece(s) | 4 Day(s) or more | - | Female (socket) | 3 | 10 | 125 | PSE | 16 | 9.5 ~ 11.0 | ||
SGD 18.19 | 1 Piece(s) | 4 Day(s) or more | - | Male (plug) | 3 | 10 | 125 | PSE | 16 | 9.5 ~ 11.0 | ||
SGD 18.20 | 1 Piece(s) | Available | 4 Day(s) or more | - | Male (plug) | 3 | 10 | 125 | PSE | 16 | 8.0 ~ 9.4 | |
SGD 23.18 | 1 Piece(s) | 4 Day(s) or more | - | Female (socket) | 5 | 5 | 125 | - | 16 | 9.5 ~ 11.0 | ||
SGD 23.18 | 1 Piece(s) | 4 Day(s) or more | - | Female (socket) | 5 | 5 | 125 | - | 16 | 8.0 ~ 9.4 | ||
SGD 19.71 | 1 Piece(s) | 4 Day(s) or more | - | Male (plug) | 5 | 5 | 125 | - | 16 | 9.5 ~ 11.0 |
How can we improve?
How can we improve?