(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Categories

Search by Application

Brands

  • MISUMI TECHNICAL LIBRARY
  • Mold EX Press
  • Need a copy of MISUMI Catalog?
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Quote / Order

Part Number Checker

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

  • How can we improve?

    How can we improve?

    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Privacy Policy

    Thank you for your cooperation.

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Please use the inquiry form.

    Privacy Policy

Linear Shafts One End Threaded (Part Numbers)

Linear Shafts One End Threaded

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Product Overview
Linear guide shaft is a high precision shaft product, which can be used in combination with linear bushing and other bushing products. In addition to excellent abrasion resistance, it offers a variety of alterations.
Dimensional Drawing
Note: When B=0 or S=0, it indicates that there is no thread.
misumi Guide Shafts One End Threaded Introduction
Specifications Overview
Type Material Hardness Surface TreatmentD (mm)L (mm)
Standard
D Tolerance g7D Tolerance f8
E-SFAN-S45C or GCr15High Frequency Quenched
For effective hardening layer depth, clickSurface Hardness Benchmark
S45C or GCr15 55HRC～
SUS440C or High hardness corrosion resistant steel 53HRC～		-4~3025~1498
E-SSFAN-SUS440C or High hardness corrosion resistant steel
E-PSFAN-S45C or GCr15Hard Chrome Plated
Plating hardness: HV750～
Plating thickness: 3μ or more
E-PSSFAN-SUS440C or High hardness corrosion resistant steel
-E-PSFGNS45C-Hard Chrome Plated
Plating hardness: HV750～
Plating thickness: 10μ or more
The hardness of shaft end machined part (effective thread length + approx. 10mm) may be reduced due to the annealing effect of machining.
If there are requirements for rust prevention, please give priority to the hard-chrome plated products. Click Rust Prevention Method
For combination with linear bushing, please select high-frequency quenched products.
■D Tolerance
D Tolerance
Dg7f8
4-0.004
-0.016		-
5
6-0.010
-0.028
8-0.005
-0.020		-0.013
-0.035
10
12-0.006
-0.024		-0.016
-0.043
13
15
16
18
20-0.007
-0.028		-0.020
-0.053
25
30
Specification Table
Part Number1mm incrementsP
Selection		(Y)
Max.
TypeDLFB
Standard Type

(D Tolerance g7)
E-SFAN
E-SSFAN
E-PSFAN
E-PSSFAN
(D Tolerance f8)
E-PSFGN		425~2982≤F≤P×5(When P≤6)
B≤F-2

(When P＝8 or 10)
B≤F-3

(When P≥12)
B≤F-5

B≥ Thread Pitch×3		3          300
525~39834         400
625~798345        600
825~9983456       800
1025~998 4568      800
1225~1198  56810     1000
1325～1198  5681012    1000
1525~1198  5681012    1000
1625~1198  5681012    1200
2025~1198   68101216   1200
2525~1198    81012162024 1200
3025～1498    81012162024 1500
Alterations
MISUMI Linear Guide Shafts One End Threaded All Models Machining
Product Features
Feature 1: Extensively applied in various precision equipment thanks to high precision dimensional tolerance.
Feature 2: Bearing steel (S45C or GCr15) with excellent wear resistance and SUS440C or high hardness corrosion resistant steel are used for high frequency quenching, maintaining the original toughness while enhancing abrasion resistance.
Feature 3: A variety of alterations are available to accommodate different environments.
Feature 4: Usually combined with linear bushing products, achieving excellent linear guiding functionality, and less abrasion even if subject to high-speed reciprocal motion, as compared with general shaft and bushing structure.
Feature 5: The surface treatment of hard-chrome plating is available, achieving excellent anti-rust performance and HV750 plating hardness, as well as less abrasion when used in combination with high-hardness workpieces.
Precautions
MISUMI High Precision Guide Shafts Both Ends Stepped and Tapped Both Ends Stepped Selection Catalog②Reduced hardness of machined parts
 Machining is performed after quenching of base metal. The parts that may be reduced in hardness due to annealing are:
 -All threaded
 -All stepped
 -Tapped: when M≥D/2, tapped double-hole type, hard chrome plated products made of SUS440C or high hardness corrosion resistant steel
 -Adds wrench flats (SC-WSC-SX)
 -Adds screw flats (FC-WFC)
 -Adds V-grooves (VC-WVC)
 -Except for full length hardened type.
Only the shaded portion of D part is hard chrome plated.
Guide Shafts Both Ends Stepped and Tapped Both Ends Stepped Bushing MISUMI Quality Stainless Steel Material Imported from Japan		③Plating of surface treatment
 Machining is performed after surface treatment of base metal. No electroplating treatment is applied to the following parts:
 -Groove part
 -Threaded part
 -Tapped part
 -Wrench slot, V-groove, plane, cut section
 -The inside of the tube-type guide shaft may rust without hard chrome plating.
Example of Use
Standard Linear Motion MechanismFunctions of standard linear motion mechanism
①Side-by-side use of two guide shafts effectively prevents workpiece rotation
②Improved accuracy of linear motion and load capacity.
③The combination of guide shaft and linear bushing enables high-speed reciprocal motion.
④Low operational resistance, reducing the loss of workpiece.
Example Diagram
MISUMI Guide Shafts Both Ends Stepped and Tapped Both Ends Stepped Full Range of Selections
  
Product PictureFunctions of key workpieces in the mechanism
Linear guide shaft: Supporting the workpiece, combining with linear bushing to achieve guiding functionality.
For details, click Linear Guide Shafts

Linear bushing: Driving the workpiece to move on the guide shaft through the steel ball circulating structure.
For details, click Linear Bushings

Guide shaft support: Supporting and fixing the guide shaft for effective adjustment of shaft pitch and improved equipment stability.
For details, click Guide Shaft Posts

Stopper: Performing limit action for adjustment of effective stroke of mechanism
For details, click Stoppers
Direct-from-Manufacturer MISUMI Guide Shafts Both Ends Stepped and Tapped Both Ends Stepped Larger Image
Application Industries
Medical Semiconductor Electronic & Electrical
MISUMI High Frequency Quenched Shafts Both Ends Stepped and Tapped Both Ends Stepped Selection Manufacturer MISUMI Guide Shafts Both Ends Stepped and Tapped Both Ends Stepped Details Introduction Direct-from-Manufacturer Hollow Shafts for Sliding Both Ends Stepped and Tapped Both Ends Stepped MISUMI Model
Smart Phones Food Automotive
LINEAR SHAFT Rigid Shafts Both Ends Stepped and Tapped Both Ends Stepped Drawing Custom Size Hollow Shafts Both Ends Stepped and Tapped Both Ends Stepped Chrome Plated Bar Dimensional Drawing Dedicated Linear Hollow Shafts Both Ends Stepped and Tapped Both Ends Stepped Bearing Steel Stainless Steel Full Range of Models
Related Products
Linear Bushing Standard Type Straight Type Bearings With Housings T-Shaped Shaft Collars (Clamp)
Stainless Steel Rigid Shafts Chrome Plated Bar Both Ends Stepped and Tapped Both Ends Stepped Machining misumi Linear Hollow Shafts Both Ends Stepped and Tapped Both Ends Stepped Sales MISUMI Guide Shafts Introduction Linear Guide Shafts Both Ends Stepped and Tapped Both Ends Stepped Unit Mechanism Design Selection
Typical Model: LMU6 Typical Model: BGHFS6000ZZ-30 Typical Model: PSCS10-10
Advantages: High quality, affordable price, short delivery time Advantages: Full range, high precision and high quality Advantages: Matching shaft products, full range

Related Documents
For anti-rust performance of metal materials and surface treatment, click Anti-Rust Performance Table.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. 1
  2. 2
  3. Next >>
Part Number
E-PSFAN4-[25-298/1]-F[2-28/1]-B[0-28/1]-P3
E-PSFAN4-[25-298/1]-F[2-28/1]-B[0-28/1]-PMC3
E-PSFAN5-[25-398/1]-F[2-35/1]-B[0-35/1]-P[3,​4]
E-PSFAN5-[25-398/1]-F[2-35/1]-B[0-35/1]-PMC[3,​4,​5]
E-PSFAN8-[25-998/1]-F[2-56/1]-B[0-53/1]-P[3,​4,​5,​6,​8]
E-PSFAN8-[25-998/1]-F[2-56/1]-B[0-53/1]-PMC[3,​4,​5,​6,​8]
E-PSFAN10-[25-998/1]-F[2-84/1]-B[0-70/1]-P[4,​5,​6,​8,​10]
E-PSFAN10-[25-998/1]-F[2-84/1]-B[0-70/1]-PMC[4,​5,​6,​8,​10]
E-PSFAN10-[25-998/1]-F[2-84/1]-B[0-70/1]-PMS10
E-PSFAN12-[25-1198/1]-F[2-84/1]-B[0-84/1]-P[5,​6,​8,​10,​12]
E-PSFAN12-[25-1198/1]-F[2-84/1]-B[0-84/1]-PMC[5,​6,​8,​10,​12]
E-PSFAN12-[25-1198/1]-F[2-84/1]-B[0-84/1]-PMS[10,​12]
E-PSFAN13-[25-1198/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]
E-PSFAN13-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]
E-PSFAN13-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]
E-PSFAN15-[25-1198/1]-F[2-84/1]-B[0-84/1]-P[5,​6,​8,​10,​12]
E-PSFAN15-[25-1198/1]-F[2-84/1]-B[0-84/1]-PMC[5,​6,​8,​10,​12,​15]
E-PSFAN15-[25-1198/1]-F[2-84/1]-B[0-84/1]-PMS[10,​12,​14]
E-PSFAN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,​6,​8,​10,​12,​16]
E-PSFAN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,​6,​8,​10,​12,​15]
E-PSFAN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,​12,​14]
E-PSFAN20-[25-1198/1]-F[2-140/1]-B0-P[6,​8,​10,​12,​16,​20]
E-PSFAN20-[25-1198/1]-F[2-140/1]-B0-PMC[6,​8,​10,​12,​15,​17,​20]
E-PSFAN20-[25-1198/1]-F[2-140/1]-B0-PMS[10,​12,​14,​18]
E-PSFAN20-[25-1198/1]-F[2-140/1]-B[3-135/1]-P[6,​8,​10,​12,​16,​20]
E-PSFAN20-[25-1198/1]-F[2-140/1]-B[3-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]
E-PSFAN20-[25-1198/1]-F[2-140/1]-B[3-135/1]-PMS[10,​12,​14,​18]
E-PSFAN25-[25-1198/1]-F[2-210/1]-B[0-163/1]-P[8,​10,​12,​16,​20,​24]
E-PSFAN25-[25-1198/1]-F[2-210/1]-B[0-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]
E-PSFAN25-[25-1198/1]-F[2-210/1]-B[0-163/1]-PMS[10,​12,​14,​18]
E-PSFGN6-[25-598/1]-F[2-42/1]-B[2-40/1]-P[3,​4,​5]
E-PSFGN6-[25-598/1]-F[2-42/1]-B[2-40/1]-PMC[3,​4,​5]
E-PSFGN8-[25-798/1]-F[2-56/1]-B[0-56/1]-P[3,​4,​5,​6]
E-PSFGN8-[25-798/1]-F[2-56/1]-B[0-56/1]-PMC[3,​4,​5,​6]
E-PSFGN10-[25-798/1]-F[2-70/1]-B[2-70/1]-P[4,​5,​6,​8]
E-PSFGN10-[25-798/1]-F[2-70/1]-B[2-70/1]-PMC[4,​5,​6,​8]
E-PSFGN10-[25-798/1]-F[2-70/1]-B[2-70/1]-PMS10
E-PSFGN12-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10]
E-PSFGN12-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10]
E-PSFGN12-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12]
E-PSFGN13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]
E-PSFGN13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]
E-PSFGN13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]
E-PSFGN15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]
E-PSFGN15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12,​15]
E-PSFGN15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12,​14]
E-PSFGN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,​6,​8,​10,​12,​16]
E-PSFGN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,​6,​8,​10,​12,​15]
E-PSFGN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,​12,​14]
E-PSFGN20-[25-1198/1]-F[2-140/1]-B[0-135/1]-P[6,​8,​10,​12,​16,​20]
E-PSFGN20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]
E-PSFGN20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMS[10,​12,​14,​18]
E-PSFGN25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,​10,​12,​16,​20,​24]
E-PSFGN25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]
E-PSFGN25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMS[10,​12,​14,​18]
E-PSFGN30-[25-1498/1]-F[2-210/1]-B[0-205/1]-P[8,​10,​12,​16,​20,​24,​30]
E-PSFGN30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMC[8,​10,​12,​15,​17,​20,​25,​30]
E-PSFGN30-[25-1498/1]-F[2-210/1]-B[0-205/1]-PMS[10,​12,​14,​18]
E-PSSFAN4-[25-298/1]-F[2-28/1]-B[0-28/1]-P3
E-PSSFAN4-[25-298/1]-F[2-28/1]-B[0-28/1]-PMC3
E-PSSFAN5-[25-398/1]-F[2-35/1]-B[0-35/1]-P[3,​4]
E-PSSFAN5-[25-398/1]-F[2-35/1]-B[0-35/1]-PMC[3,​4,​5]
E-PSSFAN6-[25-798/1]-F[2-42/1]-B[0-40/1]-P[3,​4,​5,​6]
E-PSSFAN6-[25-798/1]-F[2-42/1]-B[0-40/1]-PMC[3,​4,​5,​6]
E-PSSFAN8-[25-998/1]-F[2-56/1]-B[0-53/1]-P[3,​4,​5,​6,​8]
E-PSSFAN8-[25-998/1]-F[2-56/1]-B[0-53/1]-PMC[3,​4,​5,​6,​8]
E-PSSFAN10-[25-998/1]-F[2-70/1]-B[0-70/1]-P[4,​5,​6,​8,​10]
E-PSSFAN10-[25-998/1]-F[2-70/1]-B[0-70/1]-PMC[4,​5,​6,​8,​10]
E-PSSFAN10-[25-998/1]-F[2-70/1]-B[0-70/1]-PMS10
E-PSSFAN12-[25-1198/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]
E-PSSFAN12-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]
E-PSSFAN12-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]
E-PSSFAN13-[25-1198/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]
E-PSSFAN13-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]
E-PSSFAN13-[25-1198/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]
E-PSSFAN15-[25-1198/1]-F[2-84/1]-B[0-84/1]-P[5,​6,​8,​10,​12]
E-PSSFAN15-[25-1198/1]-F[2-84/1]-B[0-84/1]-PMC[5,​6,​8,​10,​12,​15]
E-PSSFAN15-[25-1198/1]-F[2-84/1]-B[0-84/1]-PMS[10,​12,​14]
E-PSSFAN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,​6,​8,​10,​12,​16]
E-PSSFAN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,​6,​8,​10,​12,​15]
E-PSSFAN16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,​12,​14]
E-PSSFAN20-[25-1198/1]-F[2-140/1]-B[0-135/1]-P[6,​8,​10,​12,​16,​20]
E-PSSFAN20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]
E-PSSFAN20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMS[10,​12,​14,​18]
E-PSSFAN25-[25-1198/1]-F[2-120/1]-B[0-163/1]-P[8,​10,​12,​16,​20,​24]
E-PSSFAN25-[25-1198/1]-F[2-120/1]-B[0-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]
E-PSSFAN25-[25-1198/1]-F[2-120/1]-B[0-163/1]-PMS[10,​12,​14,​18]
E-SFAN4-[25-298/1]-F[2-28/1]-B[0-28/1]-P3
E-SFAN4-[25-298/1]-F[2-28/1]-B[0-28/1]-PMC3
E-SFAN5-[25-398/1]-F[2-35/1]-B[0-35/1]-P[3,​4]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø) 		Length L
(mm) 		Shaft Fit Tolerance B
(mm) 		F
(mm) 		Threaded P (Coarse Thread)
(mm) 		Changes thread to fine one [PMC]
(mm) 		Changes thread to fine one [PMS]
(mm)

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating425 ～ 298g70 ～ 282 ～ 283--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating425 ～ 298g70 ～ 282 ～ 28-3-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating525 ～ 398g70 ～ 352 ～ 353 ～ 4--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating525 ～ 398g70 ～ 352 ～ 35-3 ～ 5-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating825 ～ 998g70 ～ 532 ～ 563 ～ 8--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating825 ～ 998g70 ～ 532 ～ 56-3 ～ 8-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 998g70 ～ 702 ～ 844 ～ 10--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 998g70 ～ 702 ～ 84-4 ～ 10-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 998g70 ～ 702 ～ 84--10

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1198g70 ～ 842 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1198g70 ～ 842 ～ 84-5 ～ 12-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1198g70 ～ 842 ～ 84--10 ～ 12

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1198g70 ～ 792 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1198g70 ～ 792 ～ 84-5 ～ 12-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1198g70 ～ 792 ～ 84--10 ～ 12

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1198g70 ～ 842 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1198g70 ～ 842 ～ 84-5 ～ 15-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1198g70 ～ 842 ～ 84--10 ～ 14

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1198g70 ～ 1072 ～ 1125 ～ 16--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1198g70 ～ 1072 ～ 112-5 ～ 15-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1198g70 ～ 1072 ～ 112--10 ～ 14

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1198g702 ～ 1406 ～ 20--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1198g702 ～ 140-6 ～ 20-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1198g702 ～ 140--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1198g73 ～ 1352 ～ 1406 ～ 20--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1198g73 ～ 1352 ～ 140-6 ～ 20-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1198g73 ～ 1352 ～ 140--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1198g70 ～ 1632 ～ 2108 ～ 24--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1198g70 ～ 1632 ～ 210-8 ～ 25-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1198g70 ～ 1632 ～ 210--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating625 ～ 598f82 ～ 402 ～ 423 ～ 5--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating625 ～ 598f82 ～ 402 ～ 42-3 ～ 5-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating825 ～ 798f80 ～ 562 ～ 563 ～ 6--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating825 ～ 798f80 ～ 562 ～ 56-3 ～ 6-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1025 ～ 798f82 ～ 702 ～ 704 ～ 8--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1025 ～ 798f82 ～ 702 ～ 70-4 ～ 8-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1025 ～ 798f82 ～ 702 ～ 70--10

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1225 ～ 998f82 ～ 842 ～ 845 ～ 10--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1225 ～ 998f82 ～ 842 ～ 84-5 ～ 10-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1225 ～ 998f82 ～ 842 ～ 84--10 ～ 12

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1325 ～ 998f80 ～ 792 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1325 ～ 998f80 ～ 792 ～ 84-5 ～ 12-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1325 ～ 998f80 ～ 792 ～ 84--10 ～ 12

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1525 ～ 998f80 ～ 792 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1525 ～ 998f80 ～ 792 ～ 84-5 ～ 15-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1525 ～ 998f80 ～ 792 ～ 84--10 ～ 14

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1625 ～ 1198f80 ～ 1072 ～ 1125 ～ 16--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1625 ～ 1198f80 ～ 1072 ～ 112-5 ～ 15-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating1625 ～ 1198f80 ～ 1072 ～ 112--10 ～ 14

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating2025 ～ 1198f80 ～ 1352 ～ 1406 ～ 20--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating2025 ～ 1198f80 ～ 1352 ～ 140-6 ～ 20-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating2025 ～ 1198f80 ～ 1352 ～ 140--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating2525 ～ 1198f80 ～ 1632 ～ 1688 ～ 24--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating2525 ～ 1198f80 ～ 1632 ～ 168-8 ～ 25-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating2525 ～ 1198f80 ～ 1632 ～ 168--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating3025 ～ 1498f80 ～ 2052 ～ 2108 ～ 30--

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating3025 ～ 1498f80 ～ 2052 ～ 210-8 ～ 30-

-

1 Piece(s) 8 Day(s) 10[Steel] Equivalent to S45CNot ProvidedHard Chrome Plating3025 ～ 1498f80 ～ 2052 ～ 210--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating425 ～ 298g70 ～ 282 ～ 283--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating425 ～ 298g70 ～ 282 ～ 28-3-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating525 ～ 398g70 ～ 352 ～ 353 ～ 4--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating525 ～ 398g70 ～ 352 ～ 35-3 ～ 5-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating625 ～ 798g70 ～ 402 ～ 423 ～ 6--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating625 ～ 798g70 ～ 402 ～ 42-3 ～ 6-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating825 ～ 998g70 ～ 532 ～ 563 ～ 8--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating825 ～ 998g70 ～ 532 ～ 56-3 ～ 8-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1025 ～ 998g70 ～ 702 ～ 704 ～ 10--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1025 ～ 998g70 ～ 702 ～ 70-4 ～ 10-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1025 ～ 998g70 ～ 702 ～ 70--10

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1225 ～ 1198g70 ～ 792 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1225 ～ 1198g70 ～ 792 ～ 84-5 ～ 12-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1225 ～ 1198g70 ～ 792 ～ 84--10 ～ 12

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1325 ～ 1198g70 ～ 792 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1325 ～ 1198g70 ～ 792 ～ 84-5 ～ 12-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1325 ～ 1198g70 ～ 792 ～ 84--10 ～ 12

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1525 ～ 1198g70 ～ 842 ～ 845 ～ 12--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1525 ～ 1198g70 ～ 842 ～ 84-5 ～ 15-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1525 ～ 1198g70 ～ 842 ～ 84--10 ～ 14

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1625 ～ 1198g70 ～ 1072 ～ 1125 ～ 16--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1625 ～ 1198g70 ～ 1072 ～ 112-5 ～ 15-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1625 ～ 1198g70 ～ 1072 ～ 112--10 ～ 14

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2025 ～ 1198g70 ～ 1352 ～ 1406 ～ 20--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2025 ～ 1198g70 ～ 1352 ～ 140-6 ～ 20-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2025 ～ 1198g70 ～ 1352 ～ 140--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2525 ～ 1198g70 ～ 1632 ～ 1208 ～ 24--

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2525 ～ 1198g70 ～ 1632 ～ 120-8 ～ 25-

-

1 Piece(s) 8 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2525 ～ 1198g70 ～ 1632 ～ 120--10 ～ 18

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided425 ～ 298g70 ～ 282 ～ 283--

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided425 ～ 298g70 ～ 282 ～ 28-3-

-

1 Piece(s) 8 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided525 ～ 398g70 ～ 352 ～ 353 ～ 4--

Loading...

  1. 1
  2. 2
  3. Next >>

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2) Precision Standard

Configure

Clear All

143 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Material

    • Steel
      • Equivalent to S45C
      • S45C or GCr15
    • Stainless Steel
      • Martensite stainless steel

    Clear

  • Heat Treatment

    • Not Provided
    • Induction Hardened

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating

    Clear

  • Shaft Dia. D(Ø)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25
    • 30

    Clear

  • Length L(mm)

     [25-1498/1mm Unit(s)]

    Clear

  • Shaft Fit Tolerance

    • f8
    • g7

    Clear

  • B(mm)

    • 0

     [0-205/1mm Unit(s)]

    Clear

  • F(mm)

     [2-210/1mm Unit(s)]

    Clear

  • Threaded P (Coarse Thread)(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30

    Clear

  • Changes thread to fine one [PMC](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20
    • 25
    • 30

    Clear

  • Changes thread to fine one [PMS](mm)

    • 10
    • 12
    • 14
    • 18

    Clear

  • type

    • E-PSFAN
    • E-PSFGN
    • E-PSSFAN
    • E-SFAN
    • E-SSFAN

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 8 Day(s) or Less

    Clear

Specify Alterations

Tech Support

Technical Inquiry

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)

  • Tel: (65) 6733 7211
  • Fax: (65) 6733 0211
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.