(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Pivot Pins Shaft Diameter Tolerance Selectable (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Product Overview

The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

Dimensional Drawing

This type may have centering holes depending on dimensions.

The dimension of the relief groove on the shoulder and neck is a reference value.

L dimension tolerances are recommended values for oil free bushing types (MDZB, MDZF).

Specifications Overview

Type	Equivalent Material	Hardness	Surface Treatment	Accessory Shape C (With Retaining Ring Groove)	Accessory Shape B (Nut Fixed Type)
E-KCL□□	General structural steel or carbon steel	-	Ferroferric Oxide Protective Film	1 Retaining Rings	1 nut
E-KCLH□□		HRC40～	Ferroferric Oxide Protective Film
E-PKCL□□		-	Electroless Nickel Plating
E-PKCLH□□		HRC40～	Electroless Nickel Plating
E-KCLS□□	Austenitic stainless steel	-	-
E-KCLSH□□	Martensitic stainless steel	HRC45～	-

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.

Specification Table

Shape C (With Retaining Ring Groove)

Part Number			L 0.1mm increments	M		N	u	(n)	d		T	H
Type	D Tolerance Selection	D	L 0.1mm increments		Tolerance	N	u	(n)		Tolerance	T	H
E-KCLC E-KCLHC E-PKCLC E-PKCLHC E-KCLSC E-KCLSHC	M(m6) P(p6) H(h7) F(f8) C(c9) LF(For Bushing)	2	5.0~30.0	0.5	+0.05 0	2	1.9	1.0	1.5	+0.06 0	1.5	4.5
		3	5.0~50.0	0.5	+0.05 0		2.9		2	+0.06 0		5.5
		4	5.0~50.0	0.7	+0.1 0		3.9		3	+0.075 0		6.5
		5	10.0~60.0				4.9		4			8
		6	10.0~100.0				5.8	1.5	5			9
		8	10.0~100.0	0.9		3	7.8		7	+0.09 0	2	12
		10	15.0~100.0	1.15	+0.14 0		9.8		9.6	0 -0.09	2	14
		12	15.0~150.0				11.8		11.5	0 -0.11	3	17
		13	25.0~150.0				12.8		12.4			18
		14					13.8		13.4			19
		15					14.8		14.3			20
		16	30.0~150.0				15.8		15.2			21
		17					16.8		16.2			22
		18		1.35			17.8		17			23
		20					19.8		19	0 -0.21	4	26
		22					21.8		21			27
		25					24.8		23.9			30

Shape B (Nut Fixed Type)

Part Number			L 0.1mm increments	A	B	T	F	u	(n)	M (Coarse Thread)	Attached Nut
Type	D Tolerance Selection	D
E-KCLB E-KCLHB E-PKCLB E-PKCLHB E-KCLSB E-KCLSHB	M(m6) P(p6) H(h7) F(f8) C(c9) LF(For Bushing)	4	5.0～ 50.0	7	5	3	6	3.9	1.5	M 3	M 3×0.5
		5	5.0～ 60.0	9	7	4		4.9		M 4	M 4×0.7
		6	10.0~100.0	10	8	5	9	5.8		M 5	M 5×0.8
		8		13	10			7.8		M 6	M 6×1.0
		10		16	13		12	9.8		M 8	M 8×1.25
		12	15.0~150.0	18	14		16	11.8		M10	M10×1.5
		13	25.0~150.0	24	21		18	12.8		M12	M12×1.75
		14						13.8
		15						14.8
		16	30.0~150.0					15.8
		17						16.8
		18						17.8
		20		27	23		24	19.8		M16	M16×2.0
		22						21.8
		25		30	27			24.8

Shape M (Both Ends Tapped)

Part Number			L 0.1mm increments	M (Coarse Thread)	N (Coarse Thread)
Type	D Tolerance Selection	D
E-KCLM E-KCLHM E-PKCLM E-PKCLHM E-KCLSM E-KCLSHM	M(m6) P(p6) H(h7) F(f8) C(c9) LF(For Bushing)	6	20.0~100.0	M 3	M 3
		8		M 5	M 5
		10	25.0~100.0	M 6	M 6
		12	25.0~150.0
		13	35.0~150.0	M 8	M 8
		14
		15
		16	40.0~150.0	M10	M10
		17		M12	M12
		18
		20	50.0~150.0
		22		M16	M16
		25

Shape S (Set Screw Fixed Type)

Part Number			L 0.1mm increments	1mm increments		N
Type	D Tolerance Selection	D		F	E
E-KCLS E-KCLHS E-PKCLS E-PKCLHS E-KCLSS E-KCLSHS	M(m6) P(p6) H(h7) F(f8) C(c9) LF(For Bushing)	3	5.0～ 50.0	F=0 or 2≤F≤L/2	1≤E≤50	0.5
		4
		5	10.0～ 60.0
		6	10.0~100.0			1
		8
		10	15.0~100.0
		12	15.0~150.0
		13	25.0~150.0
		14
		15
		16	30.0~150.0			2
		17
		18
		20
		22
		25

Precision Standard

D	Tolerance Selection
	M	P	H	F	C	*LF
	m6	p6	h7	f8	c9	-
2・3	0.008 0.002	0.012 0.006	0 -0.01	-0.006 -0.020	-0.06 -0.085	-0.025 -0.034
4・5・6	0.012 0.004	0.02 0.012	0 -0.012	-0.010 -0.028	-0.07 -0.1	-0.025 -0.037
8・10	0.015 0.006	0.024 0.015	0 -0.015	-0.013 -0.035	-0.08 -0.116	-0.025 -0.04
12~18	0.018 0.007	0.029 0.018	0 -0.018	-0.016 -0.043	-0.095 -0.138	-0.025 -0.043
20~25	0.021 0.008	0.035 0.022	0 -0.021	-0.020 -0.053	-0.11 -0.162	-0.025 -0.046

LF dimension tolerances are recommended values for oil free bushing types (MDZB, MDZF).

Product Features

Feature 1: Available with optional shaft diameter tolerances. The tolerances include m6 tolerance, p6 tolerance, h7 tolerance, f8 tolerance, and c9 tolerance, in order to accommodate different applications.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.

Precautions

①Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②Products of shape C and shape B come with accessories, so take care to avoid missing upon receipt.

Example of Use

Pivot Pins Shaft Diameter Tolerance Selectable, Complete Specifications, Low Price, High Precision

Application Industries

Electronic & Electrical	Automotive	Lithium battery

Robotics	Smart Phones	Semiconductor

Related Documents

For anti-rust performance and maintenance of metal materials and surface treatment, refer to

Anti-rust Performance Table
For specifications of the supplied retaining ring, refer to

Retaining Ring Specifications

: 30; 60; 90

Part Number
E-KCLSSC25-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF3-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSF4-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSF5-[10-60/0.1]-F[0-30/1]-E[1-50/1]
E-KCLSSF6-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSF8-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSF10-[15-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSF12-[15-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF13-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF14-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF15-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF16-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF17-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF18-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF20-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF22-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSF25-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH3-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSH4-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSH5-[10-60/0.1]-F[0-30/1]-E[1-50/1]
E-KCLSSH6-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSH8-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSH10-[15-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSH12-[15-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH13-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH14-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH15-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH16-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH17-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH18-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH20-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH22-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSH25-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSLF3-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSLF4-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSLF5-[10-60/0.1]-F[0-30/1]-E[1-50/1]
E-KCLSSLF6-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSLF8-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSLF10-[15-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSLF12-[15-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSLF15-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSLF16-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSLF20-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSLF25-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM3-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSM4-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSM5-[10-60/0.1]-F[0-30/1]-E[1-50/1]
E-KCLSSM6-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSM8-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSM10-[15-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSM12-[15-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM13-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM14-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM15-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM16-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM17-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM18-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM20-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM22-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSM25-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP3-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSP4-[5-50/0.1]-F[0-25/1]-E[1-50/1]
E-KCLSSP5-[10-60/0.1]-F[0-30/1]-E[1-50/1]
E-KCLSSP6-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSP8-[10-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSP10-[15-100/0.1]-F[0-50/1]-E[1-50/1]
E-KCLSSP12-[15-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP13-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP14-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP15-[25-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP16-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP17-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP18-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP20-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP22-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-KCLSSP25-[30-150/0.1]-F[0-100/1]-E[1-50/1]
E-PKCLHMC6-[20-100/0.1]
E-PKCLHMC8-[20-100/0.1]
E-PKCLHMC10-[25-100/0.1]
E-PKCLHMC12-[25-100/0.1]
E-PKCLHMC20-[50-100/0.1]
E-PKCLHMC25-[50-100/0.1]
E-PKCLHMF6-[20-100/0.1]
E-PKCLHMF8-[20-100/0.1]
E-PKCLHMF10-[25-100/0.1]
E-PKCLHMF12-[25-150/0.1]
E-PKCLHMF13-[35-150/0.1]
E-PKCLHMF14-[35-150/0.1]
E-PKCLHMF15-[35-150/0.1]
E-PKCLHMF16-[40-150/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Shaft Dia. D (mm)	Mounting Method	Basic Shape	Material	Hardness	Surface Treatment	Material Detail	D Tolerance Selection	Number of Chamfering Positions	L Dimension Tolerance (mm)	E (mm)	F (mm)
-	1 Piece(s)	10 Day(s)	10	25	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	C(c9)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	3	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	4	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	5	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	10 ～ 60	1 ～ 50	0 ～ 30
-	1 Piece(s)	10 Day(s)	10	6	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	8	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	10	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	15 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	12	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	15 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	13	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	14	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	15	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	16	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	17	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	18	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	20	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	22	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	25	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	F(f8)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	3	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	4	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	5	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	10 ～ 60	1 ～ 50	0 ～ 30
-	1 Piece(s)	10 Day(s)	10	6	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	8	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	10	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	15 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	12	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	15 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	13	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	14	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	15	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	16	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	17	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	18	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	20	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	22	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	25	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	H(h7)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	3	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	4	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	5	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	10 ～ 60	1 ～ 50	0 ～ 30
-	1 Piece(s)	10 Day(s)	10	6	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	8	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	10	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	15 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	12	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	15 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	15	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	16	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	20	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	25	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	LF (For Bushing)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	3	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	4	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	5	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	10 ～ 60	1 ～ 50	0 ～ 30
-	1 Piece(s)	10 Day(s)	10	6	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	8	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	10	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	15 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	12	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	15 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	13	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	14	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	15	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	16	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	17	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	18	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	20	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	22	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	25	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	M(m6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	3	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	4	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	5 ～ 50	1 ～ 50	0 ～ 25
-	1 Piece(s)	10 Day(s)	10	5	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	10 ～ 60	1 ～ 50	0 ～ 30
-	1 Piece(s)	10 Day(s)	10	6	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	8	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	10 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	10	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	15 ～ 100	1 ～ 50	0 ～ 50
-	1 Piece(s)	10 Day(s)	10	12	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	15 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	13	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	14	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	15	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	25 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	16	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	17	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	18	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	20	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	22	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	25	Set Screw (Set Screw Flat, D-Cut)	Straight	Stainless Steel	Not Spec-designed	Not Provided	Austenitic stainless steel	P(p6)	1 place	30 ～ 150	1 ～ 50	0 ～ 100
-	1 Piece(s)	10 Day(s)	10	6	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	C(c9)	-	20 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	8	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	C(c9)	-	20 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	10	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	C(c9)	-	25 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	12	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	C(c9)	-	25 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	20	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	C(c9)	-	50 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	25	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	C(c9)	-	50 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	6	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	20 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	8	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	20 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	10	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	25 ～ 100	-	-
-	1 Piece(s)	10 Day(s)	10	12	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	25 ～ 150	-	-
-	1 Piece(s)	10 Day(s)	10	13	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	35 ～ 150	-	-
-	1 Piece(s)	10 Day(s)	10	14	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	35 ～ 150	-	-
-	1 Piece(s)	10 Day(s)	10	15	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	35 ～ 150	-	-
-	1 Piece(s)	10 Day(s)	10	16	Tapped	Straight	Steel	Hardness Requirement	Electroless Nickel Plating	General structural steel or carbon steel	F(f8)	-	40 ～ 150	-	-

Basic Information

Type	L configurable	Hex Socket	Not Provided

Configure

895 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Shaft Dia. D(mm)
2

3

4

5

6

8

10

12

13

14

15

16

17

18

20

22

25
Clear
Mounting Method
- Retaining Ring
- Nut (Threaded)
- Tapped
- Set Screw (Set Screw Flat, D-Cut)
Clear
Material
- Steel
- Stainless Steel
Clear
Hardness
- Not Spec-designed
- Hardness Requirement
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear
Material Detail
Austenitic stainless steel

General structural steel or carbon steel

Martensite stainless steel
Clear
D Tolerance Selection
M(m6)

P(p6)

H(h7)

F(f8)

C(c9)

LF (For Bushing)
Clear
Number of Chamfering Positions
- 1 place
Clear
L Dimension Tolerance(mm)
[5-150/0.1mm Unit(s)]
Clear
E(mm)
[1-50/1mm Unit(s)]
Clear
F(mm)
[0-100/1mm Unit(s)]
Clear
type
- E-KCLBC
- E-KCLBF
- E-KCLBH
- E-KCLBLF
- E-KCLBM
- E-KCLBP
- E-KCLCC
- E-KCLCF
- E-KCLCH
- E-KCLCLF
- E-KCLCM
- E-KCLCP
- E-KCLHBC
- E-KCLHBF
- E-KCLHBH
- E-KCLHBLF
- E-KCLHBM
- E-KCLHBP
- E-KCLHCC
- E-KCLHCF
- E-KCLHCH
- E-KCLHCLF
- E-KCLHCM
- E-KCLHCP
- E-KCLHMC
- E-KCLHMF
- E-KCLHMH
- E-KCLHMLF
- E-KCLHMM
- E-KCLHMP
- E-KCLHSC
- E-KCLHSF
- E-KCLHSH
- E-KCLHSLF
- E-KCLHSM
- E-KCLHSP
- E-KCLMC
- E-KCLMF
- E-KCLMH
- E-KCLMLF
- E-KCLMM
- E-KCLMP
- E-KCLSBC
- E-KCLSBF
- E-KCLSBH
- E-KCLSBLF
- E-KCLSBM
- E-KCLSBP
- E-KCLSC
- E-KCLSCC
- E-KCLSCF
- E-KCLSCH
- E-KCLSCLF
- E-KCLSCM
- E-KCLSCP
- E-KCLSF
- E-KCLSH
- E-KCLSHBC
- E-KCLSHBF
- E-KCLSHBH
- E-KCLSHBLF
- E-KCLSHBM
- E-KCLSHBP
- E-KCLSHCC
- E-KCLSHCF
- E-KCLSHCH
- E-KCLSHCLF
- E-KCLSHCM
- E-KCLSHCP
- E-KCLSHMC
- E-KCLSHMF
- E-KCLSHMH
- E-KCLSHMLF
- E-KCLSHMM
- E-KCLSHMP
- E-KCLSHSC
- E-KCLSHSF
- E-KCLSHSH
- E-KCLSHSLF
- E-KCLSHSM
- E-KCLSHSP
- E-KCLSLF
- E-KCLSM
- E-KCLSMC
- E-KCLSMF
- E-KCLSMH
- E-KCLSMLF
- E-KCLSMM
- E-KCLSMP
- E-KCLSP
- E-KCLSSC
- E-KCLSSF
- E-KCLSSH
- E-KCLSSLF
- E-KCLSSM
- E-KCLSSP
- E-PKCLBC
- E-PKCLBF
- E-PKCLBH
- E-PKCLBLF
- E-PKCLBM
- E-PKCLBP
- E-PKCLCC
- E-PKCLCF
- E-PKCLCH
- E-PKCLCLF
- E-PKCLCM
- E-PKCLCP
- E-PKCLHBC
- E-PKCLHBF
- E-PKCLHBH
- E-PKCLHBLF
- E-PKCLHBM
- E-PKCLHBP
- E-PKCLHCC
- E-PKCLHCF
- E-PKCLHCH
- E-PKCLHCLF
- E-PKCLHCM
- E-PKCLHCP
- E-PKCLHMC
- E-PKCLHMF
- E-PKCLHMH
- E-PKCLHMLF
- E-PKCLHMM
- E-PKCLHMP
- E-PKCLHSC
- E-PKCLHSF
- E-PKCLHSH
- E-PKCLHSLF
- E-PKCLHSM
- E-PKCLHSP
- E-PKCLMC
- E-PKCLMF
- E-PKCLMH
- E-PKCLMLF
- E-PKCLMM
- E-PKCLMP
- E-PKCLSC
- E-PKCLSF
- E-PKCLSH
- E-PKCLSLF
- E-PKCLSM
- E-PKCLSP
Clear
Basic Shape
- Shouldered
- Straight
Clear

Days to Ship

All

9 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Adjustment Screw Components Hex Socket on Head	Single Bearing Type with Retaining Ring Embedded	Packed Gasket Ring Fixed/Gasket Ring

Representative model: ANB8-40	Representative model: BGRR6000ZZ	Representative model: PCIMR6-12-0.1
Advantages: manual adjustment and positioning, optional length	Advantages: full range, high precision	Advantages: full range, high precision and high quality

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Pivot Pins Shaft Diameter Tolerance Selectable (Part Numbers)

Basic Information

Configure

Specification/Dimensions

Shaft Dia. D(mm)

Mounting Method

Material

Hardness

Surface Treatment

Material Detail

D Tolerance Selection

Number of Chamfering Positions

L Dimension Tolerance(mm)

E(mm)

F(mm)

type

Basic Shape

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)