(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Round Posts, Both End Stepped, Both end Tapped, Length Configurable

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Product Overview

Round post is a common processing component, with the functions of connection, fastening, support, separation and so on, mainly used in various fastening and supporting mechanisms.
At the same time, there are a variety of materials to choose from, allowing it to be widely used in automation, electronics and electrical appliances, medical treatment, communication and other fields.

Dimensional Drawing

MISUMI Round Posts Imported from Japan, Embedded, Japanese Quality

Specifications Overview

Type Both Ends Tapped		Material	Surface Treatment	D (mm)	L (mm)
Stepped Part Fixed	Stepped Part & Wrench Flats Configurable
E-NETJ	E-NETJF	General structural steel or carbon steel	-	8~30	15~800
E-ETKJ	E-ETKJF		Ferroferric Oxide Protective Film
E-PETJ	E-PETJF		Electroless Nickel Plating
E-SETJ	E-SETJF	Austenitic stainless steel	-

If there are requirements for rust prevention, give priority to the products with surface treatment of electroless nickel plating and products made of austenitic stainless steel. Please click

Anti-Rust Method.

Anti-rust Oil is applied on products made of general structural steel or carbon steel.

The area around the wrench flats may become glossy due to polishing.

L+E(G)+F(H)≥M×2+N×2

Specification Table

■Both ends tapped

Part Number			L 1mm increments	SC 1mm increments With wrench flats only	M (Coarse Thread) · N (Coarse Thread) Selection								G 1mm increments	H 1mm increments	E	F	P	V	W	ℓ₁
Type		D	L 1mm increments	SC 1mm increments With wrench flats only	M (Coarse Thread) · N (Coarse Thread) Selection								G 1mm increments	H 1mm increments	E	F	P	V	W	ℓ₁
Stepped part selectable General structural steel or carbon steel E-NETJ E-ETKJ E-PETJ Austenitic stainless steel E-SETJ	Stepped part & wrench flats configurable General structural steel or carbon steel E-NETJF E-ETKJF E-PETJF Austenitic stainless steel E-SETJF	8	15～200	0～192	3	4							2～4	2～4	4	4	6	6	7	8
		10	15～400	0～392	3	4	5						2～5	2～5	5	5	8	8	8	8
		12	20～500	0～490		4	5	6					2～6	2～6	6	6	10	10	10	10
		15	25～600	0～590			5	6	8				2～8	2～8	8	8	12	12	13
		20	40～600	0～590			5	6	8	10	12		2~10	2~10	10	10	16	16	17
		25	55～700	0～690			5	6	8	10	12	16	2~12	2~12	12	12	20	20	22
		30	55～800	0～785			5	6	8	10	12	16	2~16	2~16	16	16	24	24	27	15

L Dimension tolerances are as follows:
L 15-300 ±0.2
L300.5-600 ±0.3
L600.5-800 ±0.4.

Product Features

Feature 1: The length and thread of the round post can be freely specified to accommodate different operating environments.
Feature 2: Available in 2 types of materials: general structural steel, austenitic stainless steel.
Feature 3: Available in 2 types of surface treatments: ferroferric oxide protective film (blackening), electroless nickel plating.
Feature 4: Products with surface treatment (electroless nickel plating) and material (austenitic stainless steel) for good anti-rust performance are widely used in precision equipment and dust-free environment.
Feature 5: With the main functions of connection, fastening, support and separation, it is often used in mechanisms with various frames as a connection and support component.

Usage Method

Intended Use	Support and Fixation	Fastening and Connection	Separation
Usage Method Diagram
Feature	- It can bear large load in vertical direction - ±0.05mm can be selected as the minimum tolerance of length specification, which ensures the stability of the mechanism	- Simple and aesthetic connection	- Connected to the baffle to effectively block the mechanism in operation and prevent interference - Easy to fasten and install in narrow spaces

Precautions

①Fastening method of post
The post is generally fastened by torque method. For bolts, fasten them within the range of fastening torque, otherwise excessive torque will cause thread fracture.
②Anti-rust specification selection and maintenance.
If there are requirements for anti-corrosion performance, select products with surface treatment of electroless nickel plating or those made of austenitic stainless steel when choosing general structural steel products.
General structural steel posts without surface treatment are recommended to be stored in a constant-temperature and dry environment, and regularly applied with anti-rust oil for maintenance.

Example of Use

Direct-from-Manufacturer MISUMI round post Both ends tapped

Equipment name: Pull-in conveyor
Function description:
The pull-in conveyor is a space-saving type non-driving conveyor
Function: With the collaboration of the pull-in mechanism and the roller bar, the conveying function can be achieved without driving equipment, and the detection is performed with a proximity sensor, thus improving the operation efficiency of the equipment, suitable for narrow spaces with no room at the bottom and difficult for hands to reach in.

Function of round post in the mechanism
①Round post is used as a fastening connector in the mechanism to support the weight of all workpieces on the upper part and increase the stability of the mechanism.
②Because the mechanism is often used in narrow space, the fastening method of round post is very simple and convenient, thus facilitating the installation and maintenance of equipment.

For details, click and refer to

Pull-in Conveyor

Application Industries

Medical	Semiconductor	Electronic & Electrical

Smart Phones	Food	Automotive

Related Documents

For applicable tightening torque for bolts, click

Torque Table
For bolt strength, click

Bolt Strength Table
For anti-rust performance of metal materials and surface treatment, click

Anti-rust Performance Table

: 30; 45; 60

Part Number
E-NETJ8-[15-200/1]-M[3,4]-N[3,4]
E-NETJ10-[15-400/1]-M[3,4,5]-N[3,4,5]
E-NETJ12-[20-500/1]-M[4,5,6]-N[4,5,6]
E-NETJ15-[25-600/1]-M[5,6,8]-N[5,6,8]
E-NETJ20-[40-600/1]-M[5,6,8,10,12]-N[5,6,8,10,12]
E-NETJ25-[55-700/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-NETJ30-[55-800/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-NETJF8-[15-200/1]-SC[0-142/1]-M[3,4]-N[3,4]-G0-H0
E-NETJF8-[15-200/1]-SC[0-142/1]-M[3,4]-N[3,4]-G0-H[2-4/1]
E-NETJF8-[15-200/1]-SC[0-142/1]-M[3,4]-N[3,4]-G[2-4/1]-H0
E-NETJF8-[15-200/1]-SC[0-142/1]-M[3,4]-N[3,4]-G[2-4/1]-H[2-4/1]
E-NETJF10-[15-400/1]-SC[0-342/1]-M[3,4,5]-N[3,4,5]-G0-H0
E-NETJF10-[15-400/1]-SC[0-342/1]-M[3,4,5]-N[3,4,5]-G0-H[2-5/1]
E-NETJF10-[15-400/1]-SC[0-342/1]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H0
E-NETJF10-[15-400/1]-SC[0-342/1]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H[2-5/1]
E-NETJF12-[20-500/1]-SC[0-390/1]-M[4,5,6]-N[4,5,6]-G0-H0
E-NETJF12-[20-500/1]-SC[0-390/1]-M[4,5,6]-N[4,5,6]-G0-H[2-6/1]
E-NETJF12-[20-500/1]-SC[0-390/1]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H0
E-NETJF12-[20-500/1]-SC[0-390/1]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]
E-NETJF15-[25-600/1]-SC[0-490/1]-M[5,6,8]-N[5,6,8]-G0-H0
E-NETJF15-[25-600/1]-SC[0-490/1]-M[5,6,8]-N[5,6,8]-G0-H[2-8/1]
E-NETJF15-[25-600/1]-SC[0-490/1]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H0
E-NETJF15-[25-600/1]-SC[0-490/1]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]
E-NETJF20-[40-600/1]-SC[0-490/1]-M[5,6,8,10,12]-N[5,6,8,10,12]-G0-H0
E-NETJF20-[40-600/1]-SC[0-490/1]-M[5,6,8,10,12]-N[5,6,8,10,12]-G0-H[2-10/1]
E-NETJF20-[40-600/1]-SC[0-490/1]-M[5,6,8,10,12]-N[5,6,8,10,12]-G[2-10/1]-H0
E-NETJF20-[40-600/1]-SC[0-490/1]-M[5,6,8,10,12]-N[5,6,8,10,12]-G[2-10/1]-H[2-10/1]
E-NETJF25-[55-700/1]-SC[0-590/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H0
E-NETJF25-[55-700/1]-SC[0-590/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H[2-12/1]
E-NETJF25-[55-700/1]-SC[0-590/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-12/1]-H0
E-NETJF25-[55-700/1]-SC[0-590/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-12/1]-H[2-12/1]
E-NETJF30-[55-800/1]-SC[0-685/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H0
E-NETJF30-[55-800/1]-SC[0-685/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H[2-16/1]
E-NETJF30-[55-800/1]-SC[0-685/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H0
E-NETJF30-[55-800/1]-SC[0-685/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H[2-16/1]
E-SETJ8-[15-200/1]-M[3,4]-N[3,4]
E-SETJ10-[15-400/1]-M[3,4,5]-N[3,4,5]
E-SETJ12-[20-500/1]-M[4,5,6]-N[4,5,6]
E-SETJ15-[25-600/1]-M[5,6,8]-N[5,6,8]
E-SETJ20-[40-600/1]-M[5,6,8,10,12]-N[5,6,8,10,12]
E-SETJ25-[55-700/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-SETJ30-[55-800/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-SETJF8-[15-200/1]-SC[0-142/1]-M[3,4]-N[3,4]-G[2-4/1]-H[2-4/1]
E-SETJF10-[15-400/1]-SC[0-342/1]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H[2-5/1]
E-SETJF12-[20-500/1]-SC[0-390/1]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]
E-SETJF15-[25-600/1]-SC[0-490/1]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]
E-SETJF20-[40-600/1]-SC[0-490/1]-M[5,6,8,10,12]-N[5,6,8,10,12]-G[2-10/1]-H[2-10/1]
E-SETJF25-[55-700/1]-SC[0-590/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-12/1]-H[2-12/1]
E-SETJF30-[55-800/1]-SC[0-685/1]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H[2-16/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Outer Dia. D (Ø)	Material	Surface Treatment	Length L (mm)	Type	Wrench Flatted	Distance to wrench slot [SC] (mm)	Thread Diameter M (mm)	Thread Diameter N (mm)	Thread Length G (mm)	H (mm)
-	1 Piece(s)	8 Day(s)	10	8	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	3 ～ 4	3 ～ 4	-	-
-	1 Piece(s)	8 Day(s)	10	10	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	8 Day(s)	10	12	[Steel] General structural steel or carbon steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	4 ～ 6	4 ～ 6	-	-
-	1 Piece(s)	8 Day(s)	10	15	[Steel] General structural steel or carbon steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 8	5 ～ 8	-	-
-	1 Piece(s)	8 Day(s)	10	20	[Steel] General structural steel or carbon steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 12	5 ～ 12	-	-
-	1 Piece(s)	8 Day(s)	10	25	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	8 Day(s)	10	30	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	8 Day(s)	10	8	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 142	3 ～ 4	3 ～ 4	0	0
-	1 Piece(s)	8 Day(s)	10	8	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 142	3 ～ 4	3 ～ 4	0	2 ～ 4
-	1 Piece(s)	8 Day(s)	10	8	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 142	3 ～ 4	3 ～ 4	2 ～ 4	0
-	1 Piece(s)	8 Day(s)	10	8	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 142	3 ～ 4	3 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	8 Day(s)	10	10	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 342	3 ～ 5	3 ～ 5	0	0
-	1 Piece(s)	8 Day(s)	10	10	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 342	3 ～ 5	3 ～ 5	0	2 ～ 5
-	1 Piece(s)	8 Day(s)	10	10	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 342	3 ～ 5	3 ～ 5	2 ～ 5	0
-	1 Piece(s)	8 Day(s)	10	10	[Steel] General structural steel or carbon steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 342	3 ～ 5	3 ～ 5	2 ～ 5	2 ～ 5
-	1 Piece(s)	8 Day(s)	10	12	[Steel] General structural steel or carbon steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 390	4 ～ 6	4 ～ 6	0	0
-	1 Piece(s)	8 Day(s)	10	12	[Steel] General structural steel or carbon steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 390	4 ～ 6	4 ～ 6	0	2 ～ 6
-	1 Piece(s)	8 Day(s)	10	12	[Steel] General structural steel or carbon steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 390	4 ～ 6	4 ～ 6	2 ～ 6	0
-	1 Piece(s)	8 Day(s)	10	12	[Steel] General structural steel or carbon steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 390	4 ～ 6	4 ～ 6	2 ～ 6	2 ～ 6
-	1 Piece(s)	8 Day(s)	10	15	[Steel] General structural steel or carbon steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 8	5 ～ 8	0	0
-	1 Piece(s)	8 Day(s)	10	15	[Steel] General structural steel or carbon steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 8	5 ～ 8	0	2 ～ 8
-	1 Piece(s)	8 Day(s)	10	15	[Steel] General structural steel or carbon steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 8	5 ～ 8	2 ～ 8	0
-	1 Piece(s)	8 Day(s)	10	15	[Steel] General structural steel or carbon steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 8	5 ～ 8	2 ～ 8	2 ～ 8
-	1 Piece(s)	8 Day(s)	10	20	[Steel] General structural steel or carbon steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 12	5 ～ 12	0	0
-	1 Piece(s)	8 Day(s)	10	20	[Steel] General structural steel or carbon steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 12	5 ～ 12	0	2 ～ 10
-	1 Piece(s)	8 Day(s)	10	20	[Steel] General structural steel or carbon steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 12	5 ～ 12	2 ～ 10	0
-	1 Piece(s)	8 Day(s)	10	20	[Steel] General structural steel or carbon steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 12	5 ～ 12	2 ～ 10	2 ～ 10
-	1 Piece(s)	8 Day(s)	10	25	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 590	5 ～ 16	5 ～ 16	0	0
-	1 Piece(s)	8 Day(s)	10	25	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 590	5 ～ 16	5 ～ 16	0	2 ～ 12
-	1 Piece(s)	8 Day(s)	10	25	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 590	5 ～ 16	5 ～ 16	2 ～ 12	0
-	1 Piece(s)	8 Day(s)	10	25	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 590	5 ～ 16	5 ～ 16	2 ～ 12	2 ～ 12
-	1 Piece(s)	8 Day(s)	10	30	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 685	5 ～ 16	5 ～ 16	0	0
-	1 Piece(s)	8 Day(s)	10	30	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 685	5 ～ 16	5 ～ 16	0	2 ～ 16
-	1 Piece(s)	8 Day(s)	10	30	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 685	5 ～ 16	5 ～ 16	2 ～ 16	0
-	1 Piece(s)	8 Day(s)	10	30	[Steel] General structural steel or carbon steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 685	5 ～ 16	5 ～ 16	2 ～ 16	2 ～ 16
-	1 Piece(s)	8 Day(s)	10	8	[Stainless Steel] Austenitic stainless steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	3 ～ 4	3 ～ 4	-	-
-	1 Piece(s)	8 Day(s)	10	10	[Stainless Steel] Austenitic stainless steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	8 Day(s)	10	12	[Stainless Steel] Austenitic stainless steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	4 ～ 6	4 ～ 6	-	-
-	1 Piece(s)	8 Day(s)	10	15	[Stainless Steel] Austenitic stainless steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 8	5 ～ 8	-	-
-	1 Piece(s)	8 Day(s)	10	20	[Stainless Steel] Austenitic stainless steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 12	5 ～ 12	-	-
-	1 Piece(s)	8 Day(s)	10	25	[Stainless Steel] Austenitic stainless steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	8 Day(s)	10	30	[Stainless Steel] Austenitic stainless steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part Selectable	Not Provided	-	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	8 Day(s)	10	8	[Stainless Steel] Austenitic stainless steel	Not Provided	15 ～ 200	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 142	3 ～ 4	3 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	8 Day(s)	10	10	[Stainless Steel] Austenitic stainless steel	Not Provided	15 ～ 400	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 342	3 ～ 5	3 ～ 5	2 ～ 5	2 ～ 5
-	1 Piece(s)	8 Day(s)	10	12	[Stainless Steel] Austenitic stainless steel	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 390	4 ～ 6	4 ～ 6	2 ～ 6	2 ～ 6
-	1 Piece(s)	8 Day(s)	10	15	[Stainless Steel] Austenitic stainless steel	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 8	5 ～ 8	2 ～ 8	2 ～ 8
-	1 Piece(s)	8 Day(s)	10	20	[Stainless Steel] Austenitic stainless steel	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 490	5 ～ 12	5 ～ 12	2 ～ 10	2 ～ 10
-	1 Piece(s)	8 Day(s)	10	25	[Stainless Steel] Austenitic stainless steel	Not Provided	55 ～ 700	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 590	5 ～ 16	5 ～ 16	2 ～ 12	2 ～ 12
-	1 Piece(s)	8 Day(s)	10	30	[Stainless Steel] Austenitic stainless steel	Not Provided	55 ～ 800	Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable	Provided	0 ～ 685	5 ～ 16	5 ～ 16	2 ～ 16	2 ～ 16

Basic Information

Type	Circular	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Post Type	Solid	Scale	Without Scale	Pilot (Concave-Convex at End)	Provided
Gas Vent Hole	Not Provided

Configure

49 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Outer Dia. D(Ø)
8

10

12

15

20

25

30
Clear
Material
- Steel
  - General structural steel or carbon steel
- Stainless Steel
  - Austenitic stainless steel
Clear
Length L(mm)
[15-800/1mm Unit(s)]
Clear
Type
- Both Ends Tapped　 Stepped Part Selectable
- Both Ends Tapped　 Stepped Part ＆ Wrench Slot Configurable
Clear
Wrench Flatted
- Not Provided
- Provided
Clear
Distance to wrench slot [SC](mm)
[0-685/1mm Unit(s)]
Clear
Thread Diameter M(mm)
3

4

5

6

8

10

12

16
Clear
Thread Diameter N(mm)
3

4

5

6

8

10

12

16
Clear
Thread Length G(mm)
0
[2-16/1mm Unit(s)]
Clear
H(mm)
0
[2-16/1mm Unit(s)]
Clear
type
- E-ETKJ
- E-ETKJF
- E-NETJ
- E-NETJF
- E-PETJ
- E-PETJF
- E-SETJ
- E-SETJF
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear

Days to Ship

All

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Silicon Rubber, Urethane Molded Bearings Flat, with Threaded Shaft	Strut Clamps Equal Dia., Perpendicular Configuration/Reversed	Metal Washers Standard Class T Dimension Selection, T Dimension Configurable

Representative model: UMSWH3-10	Representative model: KDST15	Representative model: WSSM13-6-5
Advantages: High quality, affordable price, short delivery time	Advantages: Full range, high precision and quality	Advantages: Matching shaft products, full range

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Round Posts, Both End Stepped, Both end Tapped, Length Configurable

Basic Information

Configure

Specification/Dimensions

Outer Dia. D(Ø)

Material

Length L(mm)

Type

Wrench Flatted

Distance to wrench slot [SC](mm)

Thread Diameter M(mm)

Thread Diameter N(mm)

Thread Length G(mm)

H(mm)

type

Surface Treatment

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)