(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Cantilever Shafts Standard, Retaining Ring Groove (Part Numbers)

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Product Overview

The cantilever pin can be used as the pivot point of rotary parts such as idlers. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

Dimensional Drawing

Specifications Overview

Type		D[Φ:mm]	Equivalent Material	Surface Treatment
Thread Length Fixed	Thread Length Configurable
E-FXAA	E-FXNAA	4~15	General structural steel or carbon steel	Ferroferric Oxide Protective Film
E-PFXAA	E-PFXNAA			Electroless Nickel Plating
E-SFXAA	E-SFXNAA		Austenitic stainless steel	－
E-HFXAA	－		Tempered steel hardness HRC30～	Ferroferric Oxide Protective Film

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.

HFXAA is only applicable to D6, 8 and 10.

Specification Table

Part Number		Dg7		1mm increments			H	W	M	d		m	n
Type	No.			Y	F	N			(Coarse Thread)	Reference Dimension	Tolerance
Thread Length Selectable E-FXAA E-PFXAA E-SFXAA E-HFXAA (D≥6) Thread Length Configurable E-FXNAA E-PFXNAA E-SFXNAA	3	3	-0.003 -0.012	2~30	3~50	3～ 6	7	5	M 3	2	＋ 0.060 0	0.5	2
	3A						11	9
	4	4	-0.004 -0.016			4～ 8	8	6	M 4	3		0.7
	4A						12	10
	5	5				5~10	9	7	M 5	4	＋ 0.075 0
	5A						13	11
	6	6		2~60	5~100	6~12	10	8	M 6	5
	6A						14	12
	8	8	-0.005 -0.020			8~16	12	10	M 8	7	＋ 0.090 0	0.9	3
	8A						16	14
	10	10				10~20	15	13	M10	9.6	0 -0.09	1.15
	10A						20	17
	12	12	-0.006 -0.024		10~150	12~24	17	14	M12	11.5	0 -0.11		4
	15	15					20	17		14.3

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.

The dimension of wrench flats is 15 when Y≥17.

N is available for Thread Length Configurable Type only.

HFXAA is only applicable to D6, 8 and 10.

Product Features

Feature 1: It has a tolerance of g7 and is used in conjunction with idlers, pulleys, sprockets, etc.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.

Precautions

①Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③This product has no accessory retaining ring. If you need a retaining ring, please select the alteration SET.
④The shapes, specifications and materials of matching retaining rings are as follows.
■Retaining ring shapes:
No.3~No.8(D=3~8): E-shaped retaining ring
No.10~No.15(D=10~15):C-shaped retaining ring
■Retaining ring specification: JIS nominal specifications For details, refer to

Retaining Ring Specifications
■Retaining ring materials:

Cantilever Pin		Retaining Ring
Corresponding Material	Surface Treatment	Material
General structural steel or carbon steel	Ferroferric Oxide Protective Film	Spring Steel
	Electroless Nickel Plating	SUS394—CSP
Austenitic stainless steel	-
SCM435	Ferroferric Oxide Protective Film	Spring Steel
	Electroless Nickel Plating	SUS394—CSP

Example of Use

Cantilever Pins Threaded with Retaining Ring Groove Widely used in various industries of automation

Equipment Name:
Tape tension adjustment mechanism
Design purpose:
A mechanism that keeps tension constant by utilizing the smooth lifting and lowering motion of a linear guide to absorb the speed difference between unwinding side and winding side.
Parts Application Description:
Cantilever pin is used in conjunction with timing pulley to adjust the tape tensioning force.

For detailed information, click

Example of Use.

Application Industries

Electronic & Electrical	Automotive	Lithium battery

Robotics	Smart Phones	Semiconductor

Related Documents

For anti-rust performance and maintenance of metal materials and surface treatment, refer to

Anti-Rust Performance
For applicable tightening torque for the bolts, refer to

Bolt Torque
For strength of bolt, refer to

Bolt Strength

: 30; 60; 90

Part Number
E-FXAA3-[2-30/1]-F[3-50/1]
E-FXAA3A-[2-30/1]-F[3-50/1]
E-FXAA4-[2-30/1]-F[3-50/1]
E-FXAA4A-[2-30/1]-F[3-50/1]
E-FXAA5-[2-30/1]-F[3-50/1]
E-FXAA5A-[2-30/1]-F[3-50/1]
E-FXAA6-[2-60/1]-F[5-100/1]
E-FXAA6A-[2-60/1]-F[5-100/1]
E-FXAA8-[2-60/1]-F[5-100/1]
E-FXAA8A-[2-60/1]-F[5-100/1]
E-FXAA10-[2-60/1]-F[5-100/1]
E-FXAA10A-[2-60/1]-F[5-100/1]
E-FXAA12-[2-60/1]-F[10-150/1]
E-FXAA15-[2-60/1]-F[10-150/1]
E-FXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]
E-FXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]
E-FXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]
E-FXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]
E-FXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]
E-FXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]
E-FXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1]
E-FXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1]
E-FXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1]
E-FXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1]
E-FXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1]
E-FXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1]
E-FXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1]
E-FXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1]
E-HFXAA6-[2-60/1]-F[5-100/1]
E-HFXAA6A-[2-60/1]-F[5-100/1]
E-HFXAA8-[2-60/1]-F[5-100/1]
E-HFXAA8A-[2-60/1]-F[5-100/1]
E-HFXAA10-[2-60/1]-F[5-100/1]
E-HFXAA10A-[2-60/1]-F[5-100/1]
E-PFXAA3-[2-30/1]-F[3-50/1]
E-PFXAA3A-[2-30/1]-F[3-50/1]
E-PFXAA4-[2-30/1]-F[3-50/1]
E-PFXAA4A-[2-30/1]-F[3-50/1]
E-PFXAA5-[2-30/1]-F[3-50/1]
E-PFXAA5A-[2-30/1]-F[3-50/1]
E-PFXAA6-[2-60/1]-F[5-100/1]
E-PFXAA6A-[2-60/1]-F[5-100/1]
E-PFXAA8-[2-60/1]-F[5-100/1]
E-PFXAA8A-[2-60/1]-F[5-100/1]
E-PFXAA10-[2-60/1]-F[5-100/1]
E-PFXAA10A-[2-60/1]-F[5-100/1]
E-PFXAA12-[2-60/1]-F[10-150/1]
E-PFXAA15-[2-60/1]-F[10-150/1]
E-PFXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]
E-PFXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]
E-PFXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]
E-PFXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]
E-PFXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]
E-PFXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]
E-PFXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1]
E-PFXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1]
E-PFXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1]
E-PFXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1]
E-PFXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1]
E-PFXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1]
E-PFXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1]
E-PFXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1]
E-SFXAA3-[2-30/1]-F[3-50/1]
E-SFXAA3A-[2-30/1]-F[3-50/1]
E-SFXAA4-[2-30/1]-F[3-50/1]
E-SFXAA4A-[2-30/1]-F[3-50/1]
E-SFXAA5-[2-30/1]-F[3-50/1]
E-SFXAA5A-[2-30/1]-F[3-50/1]
E-SFXAA6-[2-60/1]-F[5-100/1]
E-SFXAA6A-[2-60/1]-F[5-100/1]
E-SFXAA8-[2-60/1]-F[5-100/1]
E-SFXAA8A-[2-60/1]-F[5-100/1]
E-SFXAA10-[2-60/1]-F[5-100/1]
E-SFXAA10A-[2-60/1]-F[5-100/1]
E-SFXAA12-[2-60/1]-F[10-150/1]
E-SFXAA15-[2-60/1]-F[10-150/1]
E-SFXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1]
E-SFXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1]
E-SFXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1]
E-SFXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1]
E-SFXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1]
E-SFXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1]
E-SFXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1]
E-SFXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1]
E-SFXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1]
E-SFXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1]
E-SFXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1]
E-SFXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1]
E-SFXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1]
E-SFXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Shaft Diameter (mm) (mm)	Material	Surface Treatment	Hardness	Thread Length N (mm)	Material	Thread Length Ordering Code	M (Coarse)	H Dimension (mm)	Thread Length N (mm)	Shaft Shoulder Dimension	F (mm)	Y (mm)
-	1 Piece(s)	8 Day(s)	10	3	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	7	4.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	3	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	11	4.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	8	6	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	12	6	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	9	7.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	13	7.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	6	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	12	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	17	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	15	Steel	Black Oxide	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	20	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	3	Steel	Black Oxide	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	7	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	3	Steel	Black Oxide	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	11	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Black Oxide	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	8	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Black Oxide	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	12	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Black Oxide	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	9	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Black Oxide	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	13	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	6	Steel	Black Oxide	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	10	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Steel	Black Oxide	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	14	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Black Oxide	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	12	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Black Oxide	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	16	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Black Oxide	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	15	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Black Oxide	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	20	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	12	Steel	Black Oxide	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	17	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	15	Steel	Black Oxide	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	20	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Black Oxide	Hardness Spec-designed	-	Tempered steel hardness HRC30～	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	7	4.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	3	11	4.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	8	6	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	4	12	6	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	9	7.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	5	13	7.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	12	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	17	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	15	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	-	General structural steel or carbon steel	Thread Length Selectable	12	20	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	7	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	3	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	3 ～ 6	General structural steel or carbon steel	Thread Length Configurable	3	11	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	8	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	4 ～ 8	General structural steel or carbon steel	Thread Length Configurable	4	12	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	9	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	5 ～ 10	General structural steel or carbon steel	Thread Length Configurable	5	13	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	10	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	6 ～ 12	General structural steel or carbon steel	Thread Length Configurable	6	14	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	12	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	8 ～ 16	General structural steel or carbon steel	Thread Length Configurable	8	16	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	15	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	10 ～ 20	General structural steel or carbon steel	Thread Length Configurable	10	20	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	12	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	17	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	15	Steel	Electroless Nickel Plating	Hardness Not Spec-designed	12 ～ 24	General structural steel or carbon steel	Thread Length Configurable	12	20	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	3	7	4.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	3	11	4.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	4	8	6	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	4	12	6	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	5	9	7.5	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	5	13	7.5	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	6	10	9	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	6	14	9	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	8	12	12	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	8	16	12	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	10	15	15	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	10	20	15	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	12	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	12	17	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	15	Stainless Steel	Not Provided	Hardness Not Spec-designed	-	Austenitic stainless steel	Thread Length Selectable	12	20	18	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	3 ～ 6	Austenitic stainless steel	Thread Length Configurable	3	7	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	3	Stainless Steel	Not Provided	Hardness Not Spec-designed	3 ～ 6	Austenitic stainless steel	Thread Length Configurable	3	11	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	4 ～ 8	Austenitic stainless steel	Thread Length Configurable	4	8	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	4	Stainless Steel	Not Provided	Hardness Not Spec-designed	4 ～ 8	Austenitic stainless steel	Thread Length Configurable	4	12	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	5 ～ 10	Austenitic stainless steel	Thread Length Configurable	5	9	-	Standard	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	5	Stainless Steel	Not Provided	Hardness Not Spec-designed	5 ～ 10	Austenitic stainless steel	Thread Length Configurable	5	13	-	Widened	3 ～ 50	2 ～ 30
-	1 Piece(s)	8 Day(s)	10	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	6 ～ 12	Austenitic stainless steel	Thread Length Configurable	6	10	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	6	Stainless Steel	Not Provided	Hardness Not Spec-designed	6 ～ 12	Austenitic stainless steel	Thread Length Configurable	6	14	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	8 ～ 16	Austenitic stainless steel	Thread Length Configurable	8	12	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	8	Stainless Steel	Not Provided	Hardness Not Spec-designed	8 ～ 16	Austenitic stainless steel	Thread Length Configurable	8	16	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	10 ～ 20	Austenitic stainless steel	Thread Length Configurable	10	15	-	Standard	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	10	Stainless Steel	Not Provided	Hardness Not Spec-designed	10 ～ 20	Austenitic stainless steel	Thread Length Configurable	10	20	-	Widened	5 ～ 100	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	12	Stainless Steel	Not Provided	Hardness Not Spec-designed	12 ～ 24	Austenitic stainless steel	Thread Length Configurable	12	17	-	Standard	10 ～ 150	2 ～ 60
-	1 Piece(s)	8 Day(s)	10	15	Stainless Steel	Not Provided	Hardness Not Spec-designed	12 ～ 24	Austenitic stainless steel	Thread Length Configurable	12	20	-	Standard	10 ～ 150	2 ～ 60

Basic Information

Shaft Retaining Method	Threaded (Lock Nut)	Retainer Shape	Wrench Flats	Bearing Retaining Method	With Retaining Ring Grooves

Configure

90 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Shaft Diameter (mm)(mm)
3

4

5

6

8

10

12

15
Clear
Material
- Steel
- Stainless Steel
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear
Hardness
- Hardness Spec-designed
- Hardness Not Spec-designed
Clear
Thread Length N(mm)
[3-24/1mm Unit(s)]
Clear
Material
- Tempered steel hardness HRC30～
- Austenitic stainless steel
- General structural steel or carbon steel
Clear
Thread Length Ordering Code
- Thread Length Configurable
- Thread Length Selectable
Clear
M (Coarse)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
Clear
H Dimension(mm)
7

8

9

10

11

12

13

14

15

16

17

20
Clear
Thread Length N(mm)
- 4.5
- 6
- 7.5
- 9
- 12
- 15
- 18
Clear
Shaft Shoulder Dimension
- Standard
- Widened
Clear
F(mm)
[3-150/1mm Unit(s)]
Clear
Y(mm)
[2-60/1mm Unit(s)]
Clear
type
- E-FXAA
- E-FXNAA
- E-HFXAA
- E-PFXAA
- E-PFXNAA
- E-SFXAA
- E-SFXNAA
Clear

Days to Ship

All

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Idlers Belt Backside Tensioning Type	Timing Pulleys T10	Economy series Toothed Timing Belts

Representative model: AFBD9-20	Representative model: TTPA22T10150-A-P24	Representative model: C-HTBN400S2M-40
Advantages: stable quality, short delivery time, multiple specifications.	Advantages: industry standard, short delivery time, multiple types.	Advantages: rich variety of specifications, high cost performance.

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Cantilever Shafts Standard, Retaining Ring Groove (Part Numbers)

Basic Information

Configure

Specification/Dimensions

Shaft Diameter (mm)(mm)

Material

Surface Treatment

Hardness

Thread Length N(mm)

Material

Thread Length Ordering Code

M (Coarse)

H Dimension(mm)

Thread Length N(mm)

Shaft Shoulder Dimension

F(mm)

Y(mm)

type

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)