(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Miniature Linear Guides Wide Rails-Long Blocks (E-SMLGWB7H)

Miniature Linear Guides Wide Rails-Long Blocks E-SMLGWB7H
  • Volume Discount

Miniature Linear Guides Wide Rails- Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 50 and 670
● Assembly Height (mm.): 9, 12, 14, and 16
● Block Type : Long Block
● Rail Type : Wide Rail
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

Economy Miniature Wide Rail Long Block Linear Guide

Long BlockHigh Load CapacityBudget-Friendly

- Lengths available in multiple options

- Multiple assembly heights available

- Available as a set or block only

- Made from Carbon Steel with a hardness of 58HRC

- Cost-effective for various applications

Economy Miniature Wide Rail Long Block Linear Guide
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support

Product Overview
Linear guides (also known as slide rails or linear slides) are designed for precise linear motion and are used in high-precision applications. They provide higher load capacity and motion accuracy than linear bearings of the same size. These guides use rolling elements (such as steel balls) instead of an intermediate medium, allowing for smooth, precise movement even under high load conditions. They are commonly used in equipment like CNC machines, robotics, and automated systems.
Product Comparison
 MISUMI Standard Product
SSELBWL9-100
Economy Series
E-GMLGWH7-100
MaterialStainless SteelCarbon Steel
Hardness56HRC up58HRC up
Basic Rated Load C (Dynamic) (kN)1.71.77
Basic Rated Load Co (Static) (kN)43.14
Static Allowable Moment MA/MB (N・m)12.115.53
Static Allowable Moment MC (N・m)28.823.45
Height H Tolerance Difference (μm)±20±20
Height H Pair Variation Difference (μm)1540
Width N Tolerance Difference (μm)±25±25
Width N Pair Variation Difference (μm)2040
Running Parallelism Guarantee (μm)*715
Preload ManagementYN
RoHS10CompliantNon-compliant
*Running parallelism varies by rail length.
Dimensional Drawing
MISUMI Miniature Linear Guide Slider dimension drawing
■ Material
Type Material Rail Surface Treatment HardnessPreload
Guide RailBlock
E-MLGWBearing SteelStainless Steel-58-62HRCZ0 Ordinary Grade
No Gap Type
E-GMLGWVacuum evaporated chrome plating
E-SMLGWStainless Steel-55-58HRC
E-SMLGWB-Stainless Steel--
 
Specification Table
Order Example
■Component kit
Part NumberLength L
(1mm increments)
Block Dimensions (mm)Guide Rail Dimensions (mm)
TypeNominal ModelWBB1CL1L2GnM×ℓH2HH1NWBWRHRCounterbore
d×D×h
PE
E-MLGW
E-GMLGW
E-SMLGW
7H50~900251931930.841.25Φ1.2M3×31.8591.95.5-145.23.6×6×3.230Please refer to the calculation table below
9H60~90030233.52438.549.342.4122.961873.6×6×4.5
12H70~900402862845.659.32M3×3.62.8143.48248.54.5×8×4.540
15H80~90060457.5355773.22M3M4×4.23.216923429.54.5×8×4.5

■Single Block
Part NumberBlock Dimensions (mm)
TypeNominal ModelWBB1CL1L2GnM×ℓH2
E-SMLGWB7H251931930.841.25Φ1.2M3×31.85
9H30233.52438.549.342.4
12H402862845.659.32M3×3.62.8
15H60457.5355773.22M3M4×4.23.2
The dimensional tolerance of L length is ±1mm
The dimensional tolerance of E end distance is ±0.5mm

■Allowable load
Nominal ModelBasic Rated LoadStatic Allowable MomentMass
C(Dynamic)
kN
Co(Static)
kN
MA・MB
N.m
MC
N.m
Blocks
kg
Guide Rails
kg/m
7H1.773.1415.5323.450.02930.51
9H3.435.893454.540.0560.91
12H5.18.2457.37102.70.1021.49
15H8.9313.38122.6299.010.2152.86

■ Detailed dimension of L dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the rail at this time.
In addition, Dimension E's calculation formula is as follows
"E"  calculation formula
Economic type Linear Guide Length Specified Type Dimension E Calculation Formula  Economic type Linear Guide Length Specified Type Dimension E Calculation Formula

Economy series Miniature Linear Guide - Standard Guide Type -
Nominal Model7H9H12H15HNumber of mounting holes
M
L50~6760~6770~8980~892
68~9768~9790~12990~1293
98~12798~127130~169130~1694
128~157128~157170~209170~2095
158~187158~187210~249210~2496
188~217188~217250~289250~2897
218~247218~247290~329290~3298
248~277248~277330~369330~3699
278~307278~307370~409370~40910
308~337308~337410~449410~44911
338~367338~367450~489450~48912
368~397368~397490~529490~52913
398~427398~427530~569530~56914
428~457428~457570~609570~60915
458~487458~487610~649610~64916
P30304040 
Nominal Model7H9H12H15HNumber of mounting holes
M
L488~517488~517650~689650~68917
518~547518~547690~729690~72918
548~577548~577730~769730~76919
578~607578~607770~809770~80920
608~637608~637810~849810~849twenty one
638~667638~667850~889850~889twenty two
668~697668~697890~900890~900twenty three
698~727698~727--twenty four
728~757728~75725
758~787758~78726
788~817788~81727
818~847818~84728
848~877848~87729
878~900878~90030
P30304040 
Alterations
Alterations CodeSpec.
Change to Tapped Holes
MCOrdering code: MC
Change counterbored holes for fixing a guide to tapped holes.
Nominal sizeMC
7M3
9,12M4
15M5
2-Block SpecificationsB21 block added to 1-block product to ship as 2 block item.
 If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.
3-Block SpecificationsB32 blocks added to 1-block product to ship as 3 block item.
If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.
4-Block SpecificationsB43 blocks added to 1-block product to ship as 4 block item.
If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.
Preload adjustmentZFChange Z0: zero preload to
ZF: Normal clearance
Z1: Light preload
Z2: Medium preload
Z1
Z2
Rail End CutLeft End Cut
ES
Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage.
EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards.
Right End Cut
EB
*The precision of the Economy series products has been improved.
Precision Benchmark
●Dimensional Precision
Dimensional Precision TypePrecision StandardMisumi
MiniatureHeight H Tolerance±40
Height H Pair Variation40
Width N Tolerance±40
Width N Pair Variation40
●Running Parallelism
Rail Length (mm)Accuracy grade (μm)
Less than 5012
50-8013
80-12515
125-20015
200-25016
250-31517
315-40018
400-50019
500-63020
630-80022
800-90023

直线导轨尺寸精度示意图

[Running Parallelism]
The values in the table are measured after the slide rail is fixed on the base.
When moving the slider within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.
When moving the sliding block within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.

Product Features
Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Usage Method
■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
MISUMI Miniature Linear Guide Slider Precautions

■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
  Usually every 6 months.
  For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
  *The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Precautions
For normal use, the installation of the linear guide needs to meet the following four points:
① Whether the shape of the mounting surface produces interference
Flatness of MISUMI mounting surface

② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
MISUMI parallelism error tolerance

③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
Allowable height error tolerance of linear-guides

Installation method of linear guides

④ Use the standard
Installation method of linear guides
installation method Click here for the detailed installation method
Example of Use
Example of Use linear-guides
Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.

For details, click here
Application Industries
Medical Smart phone
Application of MISUMI Miniature Rail in the Medical Industry Application of linear-guides in the smartphone industry
Robotics Electronic & Electrical Appliances
Application of MISUMI linear guides in the robot industry Application of MISUMI linear guide slide in the electronic home appliance industry
Related Products
Miniature Linear Guides Medium Load linear guide Heavy Load linear guide
Miniature linear guide Standard slider type Slight clearance type MISUMI Medium Load Linear Guide MISUMI MISUMI Heavy Load Linear Guide
Typical model: SSEBZ10-55 Typical model: SVR24-280 Typical model: SXR24-280
Related Documents
For the installation and use of linear guides, please refer to here

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
E-SMLGWB7H
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBlock Type Assembly Height H
(mm)
Nominal Part Number Rail Type Set / Single Item Preload Accuracy Standards Material No. of Blocks Lubrication Type Lubrication Type L Dimension Type Applicable Linear Guide Block Material (Surface Treatment) Rail Material (Surface Treatment) Rail Surface Treatment Length L
(mm)

SGD 19.50

1 Piece(s)Available 6 Day(s) 10---------Lubrication Applied-------

Loading...

  1. 1

Basic Information

Ball Arrangement Miniature Type Retainer N/A Rolling Element Ball

Please check the type/dimensions/specifications of the part E-SMLGWB7H in the Miniature Linear Guides Wide Rails-Long Blocks series.

  • The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can linear guides or sliders be purchased separately?
Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
Question: Can the stainless steel guide rails be guaranteed not to rust?
Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
Question: What problems should be paid attention to when the linear guide is installed vertically?
Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
Question: What does micro preloading in linear guide mean?
Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?
Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
Question: Can the rail or slider be repaired if it is damaged?
Answer: Repair service is not provided, re-purchase is recommended.
Question: Can linear guide length be arbitrarily specified?
Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Check other FAQ (5 items) Hide

Similar Part Numbers

Part Number
E-GMLGWB15H
E-GMLGWB7H
E-GMLGWB9H
E-MLGWB12H
E-MLGWB15H
E-SMLGWB9H
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBlock Type Assembly Height H
(mm)
Nominal Part Number Rail Type Set / Single Item Preload Accuracy Standards Material No. of Blocks Lubrication Type Lubrication Type L Dimension Type Applicable Linear Guide Block Material (Surface Treatment) Rail Material (Surface Treatment) Rail Surface Treatment Length L
(mm)

SGD 32.20

1 Piece(s)Available 15 Day(s) ----------Lubrication Applied-------

SGD 21.30

1 Piece(s)Available 12 Day(s) ----------Lubrication Applied-------

SGD 24.00

1 Piece(s)Available 15 Day(s) ----------Lubrication Applied-------

SGD 19.37

1 Piece(s)Available Same day 10[Long] Long Block1412Wide RailBlock Only[Clearance] Normal ClearanceStandard GradeCarbon Steel----E-GMLGW12HCarbon Steel (Bearing Steel)---

SGD 25.43

1 Piece(s)Available 6 Day(s) 10[Long] Long Block1615Wide RailBlock Only[Clearance] Normal ClearanceStandard GradeCarbon Steel----E-GMLGW15HCarbon Steel (Bearing Steel)---

SGD 24.20

1 Piece(s)Available 6 Day(s) 10---------Lubrication Applied-------

Tech Support