(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Photo Microsensors, Connector Type
- Volume Discount
Photo Microsensors, Connector Type
Photomicrosensors are an economy item, The price is cheaper than the MISUMI standard product. They offer a wide variety of shape to choose from.
[Feature]
● Shape : Standard, L type, T type and Y type
● Detection Distance (mm.): 5
● Sensing modess : NPN Output (Normally Open) and PNP Output (Normally Open)
● Connection method : Connector type
[Application]
Photomicrosensors are a versatile type of sensor that can be used to measure speed, count objects, and more.
Part Number
Configured Part Number is shown.
Product Overview
Groove Type PhotomicrosensorsThe groove type Photomicrosensors is a sensor composed of one light emitter and one receiver installed face to face on both sides of a groove. The light emitter can emit infrared light or visible light, while the light receiver can receivethe light without any obstruction. However, when the detection object goes through the groove, the light is blocked and the photoelectric switch is actuated, which outputs a switch control signal to cut off or connect the load current,thus completing a control operation. Due to the groove type switch’s overall structure, the detection distance is generally limited to a few centimeters.
Product Comparison
| Model | MISUMI Standard Product FPM□65 | Economy Series C-MSX67□□ | |
| Output Format | NPN Output | NPN Output PNP Output | |
| Max. Inflow Current | 50mA | 100mA | |
| Applied Voltage | 30VDC or below | 5-24VDC | |
| Residual Voltage | 2V or below (at inflow current 50mA) 1V or below (at inflow current 16mA) | 1.5V or below (at inflow current 100mA) | |
| Output Activation | Equipped with 2 outputs: Light ON/Dark ON | ||
| Detection Distance | 6mm | 5mm | |
| Minimum Detected Object | 0.8 x 1.2mm opaque object | 0.8 x 1.2mm opaque object | |
| Hysteresis | 0.05mm or less | 0.03mm or less | |
| Repeatability | 0.05mm or less | 0.03mm or less | |
| Light Source | Red LED | ||
| Power Supply Voltage | 5 to 24VDC | ||
| Consumed Current | 15mA or less | ||
| Response Time | When receiving light: 20μs or less, when light blocked: 80μs or less (Response frequency 3kHz or above) | When receiving light: 20μs or less, when light blocked: 80μs or less (Response frequency 2kHz or above) | |
| Operation Indicator Light | Orange LED (lit when receiving light) | Operation Indicator Light (Red) (Selectable between Dark ON/Light ON) | |
| Environmental Resistance | Operating Ambient Temperature | -25°C to +55°C | |
| Operating Ambient Humidity | 35 to 85%RH | ||
| Operating Ambient Illuminance | Light receiving surface illuminance 1000lx or below | Light receiving surface illuminance 1000lx or above, 3000lx or below | |
| Withstand Voltage | 1000VAC, 50/60Hz, 1 minute between power receiving unit and case | ||
| Insulation Resistance | 50MΩ or above at 250VDC megger between charger bundle and case | 51MΩ or above at 250VDC megger between charger bundle and case | |
| Vibration Resistance | Durability 10 to 2000Hz Double Amplitude 1.5mm XYZ directions 2 hours | Durability 10 to 55Hz Double Amplitude 1.5mm XYZ directions 2 hours | |
| Impact Resistance | Durability 15,000m/s2 XYZ directions 3 times | Durability 500m/s2 XYZ directions 10 times | |
| Protection Rating | - | IP50 | |
| Protective Circuits | - | Surge protection, short circuit protection, reverse connection protection | |
| Body Material | Case: PBT, Display: Polycarbonate | Case: ABS, Display: Polycarbonate | |
| Mass | Approx. 10g | ||
Dimensional Drawing
Specifications Overview
| Part Number | Specifications | Detection Distance | Types | Indicator Mode | Output Method | Extension cable model |
| C-MSX670N | K Shape | 5mm | NPN Output | Light on when energized, light off when detected | Equipped with 2 independent outputs at the same time (switchable between Dark ON and Light ON) | EE-1010-MSM 2M EE-1010-MSM 3M |
| C-MSX671N | L Shape | |||||
| C-MSX672N | T Shape | |||||
| C-MSX674N | Y Shape | |||||
| C-MSX670P | K Shape | PNP Output | ||||
| C-MSX671P | L Shape | |||||
| C-MSX672P | T Shape | |||||
| C-MSX674P | Y Shape |
Specification Table
| Outlet Type | ||||
| Part Number (NPN Output) | C-MSX67□N-2M (Standard Type) | C-MSX95□N-2M (Miniature Specification) | C-MSX67□N | |
| C-MSX95□N-2M-R (Miniature Bending Resistant Lead Wire Specification) | ||||
| Part Number (PNP Output) | C-MSX67□P-2M(Standard Type) | C-MSX95□P-2M (Miniature Specification) | C-MSX67□P | |
| Connection method | Lead wire length 2 m | Lead wire length 2 m | Connector type | |
| Detection Distance | Groove width 5 mm | |||
| Detection Object | Opaque object 1.2*0.8 mm | |||
| Light source | Infrared light emitting diode | |||
| Response frequency | 2KHz | |||
| Power Voltage | DC5-24V | |||
| Repetitive Accuracy | 0.03mm or less | |||
| Control Output | Load Current | 3-100mA | ||
| Residual voltage | Below 2 V (load current 100 mA) | Below 2 V (load current 50 mA) | Below 1.5 V (load current 100 mA) | |
| Indicator | Operation indicator (red) | |||
| Operation pattern | Equipped with 2 independent outputs at the same time (Dark ON and Light ON) | |||
| Protection circuit | Surge protection circuit, short circuit protection, reverse connection protection | |||
| Environment temperature/Humidity | -25-+55°C/35-85%RH | |||
| Environmental illumination impact | Illuminance of light-receiving surface is above 3000LX | |||
| Maximum Voltage | AC1000 V, 50/60 Hz, 1 min between the charging part and the case | |||
| Vibration (durable) | 10-55 Hz, up and down double amplitude 1.5mm, 2 h in X, Y and Z directions respectively | |||
| Impact (durable) | 500m/s2, 10 times in X, Y and Z directions respectively | |||
| Protection Rating | IP50 | |||
| Output operation | Lead Wire Color | Output operation |
| Output 1 | Black | Dark ON |
| Output 2 | White | Light ON |
Product Features
Usage Method
When fixing the body with screws, use M3 screws, Φ6mm washers and control the tightening torque below 0.5N·m
Connector Type
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| C-MSX670N |
| C-MSX670P |
| C-MSX671N |
| C-MSX671P |
| C-MSX672N |
| C-MSX672P |
| C-MSX674N |
| C-MSX674P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shape | Max. Head Width (mm) | Max. Head Height (mm) | Max. Head Length (mm) | Type |
|---|---|---|---|---|---|---|---|---|---|
SGD 4.95 | 1 Piece(s) | Available | Same day | Standard | 25.4 | 7 | 22.2 | NPN Type (Normally Open) | |
SGD 5.01 | 1 Piece(s) | Available | 5 Day(s) | Standard | 25.4 | 7 | 22.2 | PNP Type (Normally Open) | |
SGD 4.95 | 1 Piece(s) | Available | Same day | Type L | 26.2 | 15.5 | 14.7 | NPN Type (Normally Open) | |
SGD 5.01 | 1 Piece(s) | Available | 5 Day(s) | Type L | 26.2 | 15.5 | 14.7 | PNP Type (Normally Open) | |
SGD 4.95 | 1 Piece(s) | Available | Same day | Type T | 13.7 | 26 | 22.2 | NPN Type (Normally Open) | |
SGD 5.01 | 1 Piece(s) | Available | Same day | Type T | 13.7 | 26 | 22.2 | PNP Type (Normally Open) | |
SGD 4.95 | 1 Piece(s) | Available | 5 Day(s) | Type Y | 14 | 15.5 | 21.7 | NPN Type (Normally Open) | |
SGD 5.01 | 1 Piece(s) | Available | 5 Day(s) | Type Y | 14 | 15.5 | 21.7 | PNP Type (Normally Open) |
Loading...
Basic Information
| Detection Distance(mm) | 5 |
|---|
Specification/Dimensions
-
Shape
- Standard
- Type T
- Type Y
- Type L
-
Max. Head Width(mm)
-
Max. Head Height(mm)
-
Max. Head Length(mm)
-
Type
- NPN Type (Normally Open)
- PNP Type (Normally Open)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the main types of sensors currently sold by MISUMI?
- Answer: Photoelectric sensors, proximity sensors, pressure sensors, temperature sensors, etc.
- Question: What is a photo microsensors?
- Answer: With an amplifier, an emitter and a receiver built in its integrated main body, it is a sensor that is easy to install and adjust, usually designed for detecting the passage of workpieces on the conveying line and for positioning workpieces, etc.
- Question: What are the features of the photoelectric sensor?
-
Answer:
1. The action (response time) is very fast because light is used as the medium.
2. It has a longer detection distance than the light sensor and allows for remote detection.
3. Objects made of almost any material can be detected as long as they reflect light. - Question: What are the detection methods of the photoelectric sensor?
- Answer: Transmittance type, regression reflection type, diffusion reflection type, limited reflection type, etc.
- Question: Usage requirements
- Answer: Please be careful not to expose the light receiving part to direct strong light, and avoid the transition state when the power is turned on (50ms).
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?