(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Leveling Mounts Metal Pad Standard
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
- Economy series Adjuster Flat bottom standard type
- Type: Adjuster Bolt and Flat bottom.
- Part number for series including of C-CNFJN and C-CNFJNS.
- Body Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating for Q235 Carbon Steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
Economy Metal Pad Leveling Mount
- Cost-effective solution for heavy loads
- Available in multiple steel options.
- Zinc plating for superior durability
- Easy manual assembly with smooth screw threads
- Ideal for precise leveling in various applications
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Adjuster Product Overview
An adjuster with high quality, cheap price and excellent cost performance
 |
| Economy series Adjuster Flat bottom standard type |
Adjuster Product Feature
When the threaded part rotates, it inclines slightly.
No height adjustment knob.
【Material Table】
| Type |  Material |  Surface Treatment |
| C-CNFJN | Q235 | Zinc Plating |
| C-CNFJNS | SUS304 | - |
Adjuster Usage Method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
Example of Use Adjuster
Economy series Adjuster Flat bottom standard type
Dimensional Adjuster Drawing
 |  |
| Economy series Adjuster Flat bottom standard type |
Adjuster Specification Table
| Part Number | L | D | ℓ1 | ℓ2 | E | B | t | Vertical Load （kN） | Weight (g) | ||
 Type |  M |  A | |||||||||
| C-CNFJN C-CNFJNS | 10 | 80 | 99.5 | 38 | 7 | 8 | 12.5 | 17 | 1.6 | 4 | 115 |
| 100 | 119.5 | 4 | 130 | ||||||||
| 12 | 100 | 128 | 60 | 8 | 10 | 20 | 19 | 2 | 4.5 | 212 | |
| 120 | 148 | 4.5 | 235 | ||||||||
| 16 | 100 | 132 | 75 | 10 | 13 | 22 | 24 | 5.5 | 375 | ||
| 120 | 152 | 5.5 | 414 | ||||||||
| 150 | 182 | 5.5 | 454 | ||||||||
| 20 | 120 | 155 | 13 | 16 | 30 | 6.8 | 575 | ||||
| 150 | 185 | 6.8 | 625 | ||||||||
| 200 | 235 | 6.8 | 723 | ||||||||
Note:
Thread size follows standard GB5782-1986 with below tolerance, please refer:
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Thread Material | Thread Surface Treatment | Body Material | Main Body Surface Treatment | Width D (mm) | Allowable Load (Details) (kN) | Screw Length A (mm) | Main Body Height E (mm) | Nominal of Thread M (mm) | Thread Length A (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 1.32 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 38 | 4 | 80 | 99.5 | 10 | 80 | |
SGD 1.34 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 38 | 4 | 100 | 119.5 | 10 | 100 | |
SGD 1.96 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 60 | 4.5 | 100 | 128 | 12 | 100 | |
SGD 2.08 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 60 | 4.5 | 120 | 148 | 12 | 120 | |
SGD 2.54 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 75 | 5.5 | 100 | 132 | 16 | 100 | |
SGD 2.66 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 75 | 5.5 | 120 | 152 | 16 | 120 | |
SGD 2.80 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 75 | 5.5 | 150 | 182 | 16 | 150 | |
SGD 3.54 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 75 | 6.8 | 120 | 155 | 20 | 120 | |
SGD 3.84 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 75 | 6.8 | 150 | 185 | 20 | 150 | |
SGD 4.52 | 1 Piece(s) | Available | Same day | 10 | [Steel] Steel | Galvanizing | [Steel] Steel | Galvanizing | 75 | 6.8 | 200 | 235 | 20 | 200 | |
SGD 2.36 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 38 | 4 | 80 | 99.5 | 10 | 80 | |
SGD 2.52 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 38 | 4 | 100 | 119.5 | 10 | 100 | |
SGD 3.90 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 60 | 4.5 | 100 | 128 | 12 | 100 | |
SGD 4.18 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 60 | 4.5 | 120 | 148 | 12 | 120 | |
SGD 6.06 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 75 | 5.5 | 100 | 132 | 16 | 100 | |
SGD 6.56 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 75 | 5.5 | 120 | 152 | 16 | 120 | |
SGD 6.88 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 75 | 5.5 | 150 | 182 | 16 | 150 | |
SGD 8.30 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 75 | 6.8 | 120 | 155 | 20 | 120 | |
SGD 9.62 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 75 | 6.8 | 150 | 185 | 20 | 150 | |
SGD 10.92 | 1 Piece(s) | Available | Same day | 10 | [Stainless Steel] Stainless Steel | Not Provided | [Stainless Steel] Stainless Steel | - | 75 | 6.8 | 200 | 235 | 20 | 200 |
Loading...
Basic Information
| Type | Adjusting Bolt Type | Adjusting Bolt Shape Type | Standard Type | Height Adjusting Handle | Not Provided |
|---|---|---|---|---|---|
| Properties | Standard | Swivel Mechanism | Not Provided |
Specification/Dimensions
-
Thread Material
- Stainless Steel
- Steel
- Stainless Steel
-
Thread Surface Treatment
- Not Provided
- Galvanizing
-
Body Material
- Stainless Steel
- Steel
- Stainless Steel
-
Main Body Surface Treatment
- Galvanizing
-
Width D(mm)
-
Allowable Load (Details)(kN)
-
Screw Length A(mm)
-
Main Body Height E(mm)
-
Nominal of Thread M(mm)
-
Thread Length A(mm)
-
type
- C-CNFJN
- C-CNFJNS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can the economy series adjuster, flat bottom standard type, be used on inclined ground?
- Answer: Please use the economy series adjuster, flat bottom standard type, on flat ground, and try not to use it on inclined ground, which will lead to deformation of the adjuster.
- Question: Does the economy series adjuster, flat bottom standard type, have a height adjustment knob?
- Answer: The economy series adjuster, flat bottom standard type, does not have a height adjustment knob (handle) and is just a general adjuster.
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?